iCESugar is a FPGA board made by MuseLab, which is base on Lattice iCE40UP5k, on board peripherals include RGB LED,Switch,TYPE-C-USB, Micro-USB,most IO out with standard PMOD interface
the on board debugger iCELink (base on ARM Mbed DAPLink) support drag-and-drop program, you can just drag the FPGA bitstream into the virtual disk to program, iCELink also support USB CDC serial port and JTAG
iCESugar is the first board of iCESugar series FPGA Board, [iCESugar-nano](https://github.com/wuxx/icesugar-nano)(base on Lattice iCE40LP1k) and [iCESugar-pro](https://github.com/wuxx/icesugar-pro)(base on Lattice ECP5) are already released for difference needs.
iCESugar has a on board debugger named iCELink (base on STM32F1),you can only use one USB wire to program the FPGA and debug, here is detail:
1. drag-and-drop program, just drop the bitstream into the virtual USB DISK iCELink, then wait a few second, the iCELink firmware will do the total program work
2. USB CDC serial port, it can use to communicate with FPGA
you can buy iCESugar and PMOD boards from our offcial aliexpress shop [Muse Lab Factory Store](https://www.aliexpress.com/item/4001201771358.html?pdp_ext_f=%7B%22sku_id%22:%2212000018061074631%22,%22ship_from%22:%22CN%22%7D&gps-id=pcStoreLeaderboard&scm=1007.22922.122102.0&scm_id=1007.22922.122102.0&scm-url=1007.22922.122102.0&pvid=ecf14214-d6c4-43f4-a14f-ba4dc34a480e&spm=a2g0o.store_pc_home.smartLeaderboard_1285899621.4001201771358) or my [Tindie store](https://www.tindie.com/products/johnnywu/icesugar-fpga-development-board/)