Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

2026-01-23 01:02:59 +08:00 · 2016-06-04 08:49:08 -04:00
parent f15715afea ff78aa2ba1
commit c41c649c2f
77 changed files with 2616 additions and 370 deletions
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2016 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS1012A_COMMON_H
+#define __LS1012A_COMMON_H
+
+#define CONFIG_FSL_LAYERSCAPE
+#define CONFIG_FSL_LSCH2
+#define CONFIG_LS1012A
+#define CONFIG_GICV2
+
+#define	CONFIG_SYS_HAS_SERDES
+
+#include <asm/arch/config.h>
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+#define CONFIG_SYS_TEXT_BASE		0x40100000
+
+#define CONFIG_SYS_FSL_CLK
+#define CONFIG_SYS_CLK_FREQ		100000000
+#define CONFIG_DDR_CLK_FREQ		125000000
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F	1
+
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
+#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY		CONFIG_SYS_CLK_FREQ/4	/* 25MHz */
+
+/* CSU */
+#define CONFIG_LAYERSCAPE_NS_ACCESS
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
+
+/*SPI device */
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_QE_FW_IN_SPIFLASH
+#define CONFIG_SYS_FMAN_FW_ADDR		0x400d0000
+#define CONFIG_ENV_SPI_BUS		0
+#define CONFIG_ENV_SPI_CS		0
+#define CONFIG_ENV_SPI_MAX_HZ		1000000
+#define CONFIG_ENV_SPI_MODE		0x03
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_FSL_SPI_INTERFACE
+#define CONFIG_SF_DATAFLASH
+
+#define CONFIG_FSL_QSPI
+#define QSPI0_AMBA_BASE		0x40000000
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_BAR
+
+#define FSL_QSPI_FLASH_SIZE		(1 << 24)
+#define FSL_QSPI_FLASH_NUM		2
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE			0x40000          /* 256KB */
+#define CONFIG_ENV_OFFSET		0x200000        /* 2MB */
+#define CONFIG_ENV_SECT_SIZE		0x40000
+#endif
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+
+#define CONFIG_CONS_INDEX       1
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE     1
+#define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* Command line configuration */
+#define CONFIG_CMD_ENV
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_ARCH_EARLY_INIT_R
+
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_HWCONFIG
+#define HWCONFIG_BUFFER_SIZE		128
+
+#define CONFIG_DISPLAY_CPUINFO
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"initrd_high=0xffffffff\0"		\
+	"verify=no\0"				\
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
+	"loadaddr=0x80100000\0"			\
+	"kernel_addr=0x100000\0"		\
+	"ramdisk_addr=0x800000\0"		\
+	"ramdisk_size=0x2000000\0"		\
+	"fdt_high=0xffffffffffffffff\0"		\
+	"initrd_high=0xffffffffffffffff\0"	\
+	"kernel_start=0xa00000\0"		\
+	"kernel_load=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"console=ttyAMA0,38400n8\0"
+
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 root=/dev/ram0 " \
+				"earlycon=uart8250,mmio,0x21c0500"
+#define CONFIG_BOOTCOMMAND		"sf probe 0:0; sf read $kernel_load "\
+					"$kernel_start $kernel_size && "\
+					"bootm $kernel_load"
+#define CONFIG_BOOTDELAY		10
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING		1
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_MAXARGS		64	/* max command args */
+
+#define CONFIG_PANIC_HANG
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
+
+#include <asm/fsl_secure_boot.h>
+
+#endif /* __LS1012A_COMMON_H */
--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS1012ARDB_H__
+#define __LS1012ARDB_H__
+
+#include "ls1012a_common.h"
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+#define CONFIG_CHIP_SELECTS_PER_CTRL	1
+#define CONFIG_NR_DRAM_BANKS		2
+#define CONFIG_SYS_SDRAM_SIZE		0x20000000
+
+#define CONFIG_SYS_MMDC_CORE_CONTROL_1		0x04180000
+#define CONFIG_SYS_MMDC_CORE_CONTROL_2		0x84180000
+
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+/*
+* USB
+*/
+#define CONFIG_HAS_FSL_XHCI_USB
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
+#define CONFIG_USB_STORAGE
+#endif
+
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+#endif /* __LS1012ARDB_H__ */
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -0,0 +1,191 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS1012AQDS_H__
+#define __LS1012AQDS_H__
+
+#include "ls1012a_common.h"
+
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+#define CONFIG_CHIP_SELECTS_PER_CTRL	1
+#define CONFIG_NR_DRAM_BANKS		2
+#define CONFIG_SYS_SDRAM_SIZE		0x40000000
+
+#define CONFIG_SYS_MMDC_CORE_CONTROL_1		0x05180000
+#define CONFIG_SYS_MMDC_CORE_CONTROL_2		0x85180000
+
+/*
+ * QIXIS Definitions
+ */
+#define CONFIG_FSL_QIXIS
+
+#ifdef CONFIG_FSL_QIXIS
+#define CONFIG_QIXIS_I2C_ACCESS
+#define CONFIG_SYS_I2C_FPGA_ADDR	0x66
+#define QIXIS_LBMAP_BRDCFG_REG		0x04
+#define QIXIS_LBMAP_SWITCH		6
+#define QIXIS_LBMAP_MASK		0xf7
+#define QIXIS_LBMAP_SHIFT		0
+#define QIXIS_LBMAP_DFLTBANK		0x00
+#define QIXIS_LBMAP_ALTBANK		0x08
+#define QIXIS_RST_CTL_RESET		0x41
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START	0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
+#endif
+
+/*
+ * I2C bus multiplexer
+ */
+#define I2C_MUX_PCA_ADDR_PRI		0x77
+#define I2C_MUX_PCA_ADDR_SEC		0x76 /* Secondary multiplexer */
+#define I2C_RETIMER_ADDR		0x18
+#define I2C_MUX_CH_DEFAULT		0x8
+#define I2C_MUX_CH_CH7301		0xC
+#define I2C_MUX_CH5			0xD
+#define I2C_MUX_CH7			0xF
+
+#define I2C_MUX_CH_VOL_MONITOR 0xa
+
+/*
+* RTC configuration
+*/
+#define RTC
+#define CONFIG_RTC_PCF8563 1
+#define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
+#define CONFIG_CMD_DATE
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_CMD_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM    0
+#define CONFIG_SYS_I2C_EEPROM_ADDR   0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN     1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_ADDR           0x40
+#define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF      0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT    3
+
+/* DSPI */
+#define CONFIG_FSL_DSPI1
+#define CONFIG_DEFAULT_SPI_BUS 1
+
+#define CONFIG_CMD_SPI
+#define MMAP_DSPI          DSPI1_BASE_ADDR
+
+#define CONFIG_SYS_DSPI_CTAR0   1
+
+#define CONFIG_SYS_DSPI_CTAR1	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
+				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
+				DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
+				DSPI_CTAR_DT(0))
+#define CONFIG_SPI_FLASH_SST /* cs1 */
+
+#define CONFIG_SYS_DSPI_CTAR2	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
+				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
+				DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \
+				DSPI_CTAR_DT(0))
+#define CONFIG_SPI_FLASH_STMICRO /* cs2 */
+
+#define CONFIG_SYS_DSPI_CTAR3	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
+				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
+				DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
+				DSPI_CTAR_DT(0))
+#define CONFIG_SPI_FLASH_EON /* cs3 */
+
+#define CONFIG_SF_DEFAULT_SPEED      10000000
+#define CONFIG_SF_DEFAULT_MODE       SPI_MODE_0
+#define CONFIG_SF_DEFAULT_BUS        1
+#define CONFIG_SF_DEFAULT_CS         0
+
+/*
+* USB
+*/
+/* EHCI Support - disbaled by default */
+/*#define CONFIG_HAS_FSL_DR_USB*/
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#endif
+
+/*XHCI Support - enabled by default*/
+#define CONFIG_HAS_FSL_XHCI_USB
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
+#define CONFIG_USB_STORAGE
+#endif
+
+/*  MMC  */
+#define CONFIG_MMC
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DOS_PARTITION
+#endif
+
+/* SATA */
+#define CONFIG_LIBATA
+#define	CONFIG_SCSI
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_CMD_SCSI
+#define CONFIG_DOS_PARTITION
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
+#define CONFIG_SYS_SCSI_MAX_LUN			1
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_PCI		/* Enable PCI/PCIE */
+#define CONFIG_PCIE1		/* PCIE controller 1 */
+#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
+#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
+
+#define CONFIG_SYS_PCI_64BIT
+
+#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
+#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
+#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
+#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
+
+#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
+#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
+
+#define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
+#define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
+#define CONFIG_SYS_PCIE_MEM_SIZE        0x80000000      /* 128M */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_CMD_PCI
+
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+#define CONFIG_MISC_INIT_R
+
+#endif /* __LS1012AQDS_H__ */
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS1012ARDB_H__
+#define __LS1012ARDB_H__
+
+#include "ls1012a_common.h"
+
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+#define CONFIG_CHIP_SELECTS_PER_CTRL	1
+#define CONFIG_NR_DRAM_BANKS		2
+#define CONFIG_SYS_SDRAM_SIZE		0x40000000
+
+#define CONFIG_SYS_MMDC_CORE_CONTROL_1		0x05180000
+#define CONFIG_SYS_MMDC_CORE_CONTROL_2		0x85180000
+
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+/*
+* USB
+*/
+#define CONFIG_HAS_FSL_XHCI_USB
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
+#define CONFIG_USB_STORAGE
+#endif
+
+/*
+ * I2C IO expander
+ */
+
+#define I2C_MUX_IO1_ADDR	0x24
+#define __SW_BOOT_MASK		0xFC
+#define __SW_BOOT_EMU		0x10
+#define __SW_BOOT_BANK1		0x00
+#define __SW_BOOT_BANK2		0x01
+#define __SW_REV_MASK		0x07
+#define __SW_REV_A		0xF8
+#define __SW_REV_B		0xF0
+
+/*  MMC  */
+#define CONFIG_MMC
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DOS_PARTITION
+#endif
+
+/* SATA */
+#define CONFIG_LIBATA
+#define	CONFIG_SCSI
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_CMD_SCSI
+#define CONFIG_DOS_PARTITION
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
+#define CONFIG_SYS_SCSI_MAX_LUN			1
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_PCI		/* Enable PCI/PCIE */
+#define CONFIG_PCIE1		/* PCIE controller 1 */
+#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
+#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
+
+#define CONFIG_SYS_PCI_64BIT
+
+#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
+#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
+#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
+#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
+
+#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
+#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
+
+#define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
+#define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
+#define CONFIG_SYS_PCIE_MEM_SIZE        0x80000000      /* 128M */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_CMD_PCI
+
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+#endif /* __LS1012ARDB_H__ */
--- a/include/fsl_mmdc.h
+++ b/include/fsl_mmdc.h
@@ -0,0 +1,160 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef FSL_MMDC_H
+#define FSL_MMDC_H
+
+#define CONFIG_SYS_MMDC_CORE_ODT_TIMING		0x12554000
+#define CONFIG_SYS_MMDC_CORE_TIMING_CFG_0	0xbabf7954
+#define CONFIG_SYS_MMDC_CORE_TIMING_CFG_1	0xff328f64
+#define CONFIG_SYS_MMDC_CORE_TIMING_CFG_2	0x01ff00db
+
+#define CONFIG_SYS_MMDC_CORE_MISC		0x00000680
+#define CONFIG_SYS_MMDC_PHY_MEASURE_UNIT	0x00000800
+#define CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY	0x00002000
+#define CONFIG_SYS_MMDC_PHY_ODT_CTRL		0x0000022a
+
+#define CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY	0x00bf1023
+
+#define CONFIG_SYS_MMDC_CORE_ADDR_PARTITION	0x0000007f
+
+#define CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL		0xa1390003
+
+#define	FORCE_ZQ_AUTO_CALIBRATION		(0x1 << 16)
+
+/* PHY Write Leveling Configuration and Error Status (MPWLGCR) */
+#define WR_LVL_HW_EN				0x00000001
+
+/* PHY Pre-defined Compare and CA delay-line Configuration (MPPDCMPR2) */
+#define MPR_COMPARE_EN				0x00000001
+
+#define CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG	0x40404040
+
+/* MMDC PHY Read DQS gating control register 0 (MPDGCTRL0) */
+#define AUTO_RD_DQS_GATING_CALIBRATION_EN	0x10000000
+
+/* MMDC PHY Read Delay HW Calibration Control Register (MPRDDLHWCTL) */
+#define AUTO_RD_CALIBRATION_EN			0x00000010
+
+#define CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL	0x00030035
+
+#define CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT	0x00001067
+
+#define CONFIG_SYS_MMDC_CORE_REFRESH_CTL	0x103e8000
+
+#define START_REFRESH				0x00000001
+
+/* MMDC Core Special Command Register (MDSCR) */
+#define CMD_ADDR_MSB_MR_OP(x)   (x << 24)
+
+#define  CMD_ADDR_LSB_MR_ADDR(x)    (x << 16)
+
+#define DISABLE_CFG_REQ		0x0
+#define CONFIGURATION_REQ	(0x1  << 15)
+#define WL_EN			(0x1  << 9)
+
+#define	CMD_NORMAL		(0x0 << 4)
+#define	CMD_PRECHARGE		(0x1 << 4)
+#define	CMD_AUTO_REFRESH	(0x2 << 4)
+#define	CMD_LOAD_MODE_REG	(0x3 << 4)
+#define	CMD_ZQ_CALIBRATION	(0x4 << 4)
+#define	CMD_PRECHARGE_BANK_OPEN	(0x5 << 4)
+#define	CMD_MRR			(0x6 << 4)
+
+#define CMD_BANK_ADDR_0		0x0
+#define CMD_BANK_ADDR_1		0x1
+#define CMD_BANK_ADDR_2		0x2
+#define CMD_BANK_ADDR_3		0x3
+#define CMD_BANK_ADDR_4		0x4
+#define CMD_BANK_ADDR_5		0x5
+#define CMD_BANK_ADDR_6		0x6
+#define CMD_BANK_ADDR_7		0x7
+
+/* MMDC Registers */
+struct mmdc_p_regs {
+	u32 mdctl;
+	u32 mdpdc;
+	u32 mdotc;
+	u32 mdcfg0;
+	u32 mdcfg1;
+	u32 mdcfg2;
+	u32 mdmisc;
+	u32 mdscr;
+	u32 mdref;
+	u32 res1[2];
+	u32 mdrwd;
+	u32 mdor;
+	u32 mdmrr;
+	u32 mdcfg3lp;
+	u32 mdmr4;
+	u32 mdasp;
+	u32 res2[239];
+	u32 maarcr;
+	u32 mapsr;
+	u32 maexidr0;
+	u32 maexidr1;
+	u32 madpcr0;
+	u32 madpcr1;
+	u32 madpsr0;
+	u32 madpsr1;
+	u32 madpsr2;
+	u32 madpsr3;
+	u32 madpsr4;
+	u32 madpsr5;
+	u32 masbs0;
+	u32 masbs1;
+	u32 res3[2];
+	u32 magenp;
+	u32 res4[239];
+	u32 mpzqhwctrl;
+	u32 mpzqswctrl;
+	u32 mpwlgcr;
+	u32 mpwldectrl0;
+	u32 mpwldectrl1;
+	u32 mpwldlst;
+	u32 mpodtctrl;
+	u32 mprddqby0dl;
+	u32 mprddqby1dl;
+	u32 mprddqby2dl;
+	u32 mprddqby3dl;
+	u32 res5[4];
+	u32 mpdgctrl0;
+	u32 mpdgctrl1;
+	u32 mpdgdlst0;
+	u32 mprddlctl;
+	u32 mprddlst;
+	u32 mpwrdlctl;
+	u32 mpwrdlst;
+	u32 mpsdctrl;
+	u32 mpzqlp2ctl;
+	u32 mprddlhwctl;
+	u32 mpwrdlhwctl;
+	u32 mprddlhwst0;
+	u32 mprddlhwst1;
+	u32 mpwrdlhwst0;
+	u32 mpwrdlhwst1;
+	u32 mpwlhwerr;
+	u32 mpdghwst0;
+	u32 mpdghwst1;
+	u32 mpdghwst2;
+	u32 mpdghwst3;
+	u32 mppdcmpr1;
+	u32 mppdcmpr2;
+	u32 mpswdar0;
+	u32 mpswdrdr0;
+	u32 mpswdrdr1;
+	u32 mpswdrdr2;
+	u32 mpswdrdr3;
+	u32 mpswdrdr4;
+	u32 mpswdrdr5;
+	u32 mpswdrdr6;
+	u32 mpswdrdr7;
+	u32 mpmur0;
+	u32 mpwrcadl;
+	u32 mpdccr;
+};
+
+#endif /* FSL_MMDC_H */
--- a/include/linux/usb/xhci-fsl.h
+++ b/include/linux/usb/xhci-fsl.h
@@ -59,10 +59,14 @@ struct fsl_xhci {
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2080A_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2080A_XHCI_USB2_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
-#elif defined(CONFIG_LS1043A)
+#elif defined(CONFIG_LS1043A) || defined(CONFIG_LS1012A)
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS1043A_XHCI_USB2_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_LS1043A_XHCI_USB3_ADDR
+#elif defined(CONFIG_LS1012A)
+#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
+#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
 #endif

 #define FSL_USB_XHCI_ADDR	{CONFIG_SYS_FSL_XHCI_USB1_ADDR, \