Mirror/esp32-cam-webserver
1
0
Fork 0
mirror of https://github.com/easytarget/esp32-cam-webserver.git synced 2024-02-16 18:18:24 +08:00
Code Issues Projects Releases Wiki Activity

Remove Camera Selector (#19)

Browse Source 
* CAMERA_MODULE_OVxxxx directives stripped out
* Feedback camera module model and warn if unsupported (but fallback to OV 2640)
This commit is contained in:
Owen Carter
2020-08-26 12:20:19 +02:00
committed by GitHub
parent e44728024a
commit d57f5e029c
3 changed files with 21 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

26
esp32-cam-webserver.ino
View File

@ -40,7 +40,6 @@
#define WIFI_AP_ENABLE
// Default Board and Camera:
#define CAMERA_MODEL_AI_THINKER
#define CAMERA_MODULE_OV2640
#endif
// A Name for the Camera. (can be set in myconfig.h)
@ -157,23 +156,33 @@ void setup() {
}
sensor_t * s = esp_camera_sensor_get();
//initial sensors are flipped vertically and colors are a bit saturated
// Dump camera module, warn for unsupported modules.
switch (s->id.PID) {
case OV9650_PID: Serial.println("WARNING: OV9650 camera module is not properly supported, will fallback to OV2640 operation"); break;
case OV7725_PID: Serial.println("WARNING: OV7725 camera module is not properly supported, will fallback to OV2640 operation"); break;
case OV2640_PID: Serial.println("OV2640 camera module detected"); break;
case OV3660_PID: Serial.println("OV3660 camera module detected"); break;
// case OV5640_PID: Serial.println("WARNING: OV5640 camera module is not properly supported, will fallback to OV2640 operation"); break;
default: Serial.println("WARNING: Camera module is unknown and not properly supported, will fallback to OV2640 operation");
}
// OV3660 initial sensors are flipped vertically and colors are a bit saturated
if (s->id.PID == OV3660_PID) {
s->set_vflip(s, 1);//flip it back
s->set_brightness(s, 1);//up the blightness just a bit
s->set_saturation(s, -2);//lower the saturation
}
//drop down frame size for higher initial frame rate
s->set_framesize(s, FRAMESIZE_SVGA);
#if defined(CAMERA_MODEL_M5STACK_WIDE)
s->set_vflip(s, 1);
s->set_hmirror(s, 1);
#endif
#if defined(CAMERA_MODEL_M5STACK_WIDE)
s->set_vflip(s, 1);
s->set_hmirror(s, 1);
#endif
// Feedback that hardware init is complete and we are now attempting to connect
Serial.println("Wifi Initialisation");
Serial.println();
flashLED(400);
delay(100);
@ -208,7 +217,6 @@ void setup() {
#endif
// feedback that we are connected
Serial.println("");
Serial.println("WiFi connected");
flashLED(200);
delay(100);
@ -219,6 +227,7 @@ void setup() {
// Start the Stream server, and the handler processes for the Web UI.
startCameraServer();
Serial.println();
Serial.print("Camera Ready! Use 'http://");
#ifdef WIFI_AP_ENABLE
Serial.print(WiFi.softAPIP());
@ -226,6 +235,7 @@ void setup() {
Serial.print(WiFi.localIP());
#endif
Serial.println("' to connect");
Serial.println();
}
// Notification LED