mac80211: ath9k: replace qca,led-sources

Upstream seems to be using led-sources instead of custom properties.

Code mostly taken from mt76.

Changed all(few) users of qca,led_pin to use the new format.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18805
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Rosen Penev 2025-05-14 12:59:33 -07:00 committed by Robert Marko
parent c70f842da3
commit 3d6e1a3c9d
3 changed files with 29 additions and 9 deletions

View File

@ -94,22 +94,18 @@
/**************************/
/* Initialization */
/**************************/
@@ -670,6 +750,8 @@ static int ath9k_of_init(struct ath_soft
@@ -670,6 +750,7 @@ static int ath9k_of_init(struct ath_soft
struct ath_common *common = ath9k_hw_common(ah);
enum ath_bus_type bus_type = common->bus_ops->ath_bus_type;
char eeprom_name[100];
+ u8 led_pin;
+ u32 mask;
int ret;
if (!of_device_is_available(np))
@@ -677,6 +759,49 @@ static int ath9k_of_init(struct ath_soft
@@ -677,6 +758,46 @@ static int ath9k_of_init(struct ath_soft
ath_dbg(common, CONFIG, "parsing configuration from OF node\n");
+ if (!of_property_read_u8(np, "qca,led-pin", &led_pin))
+ ah->led_pin = led_pin;
+
+ if (!of_property_read_u32(np, "qca,gpio-mask", &mask))
+ ah->caps.gpio_mask = mask;
+
@ -153,3 +149,21 @@
if (of_property_read_bool(np, "qca,no-eeprom")) {
/* ath9k-eeprom-<bus>-<id>.bin */
scnprintf(eeprom_name, sizeof(eeprom_name),
@@ -693,6 +814,17 @@ static int ath9k_of_init(struct ath_soft
of_get_mac_address(np, common->macaddr);
+ np = of_get_child_by_name(np, "led");
+ if (np && of_device_is_available(np)) {
+ u32 led_pin;
+
+ if (!of_property_read_u32(np, "led-sources", &led_pin))
+ ah->led_pin = led_pin;
+
+ ah->config.led_active_high = !of_property_read_bool(np, "led-active-low");
+ of_node_put(np);
+ }
+
return 0;
}

View File

@ -70,5 +70,8 @@
};
&wmac {
qca,led-pin = /bits/ 8 <11>;
led {
led-sources = <11>;
led-active-low;
};
};

View File

@ -349,7 +349,6 @@
reg = <0x0000 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
qca,led-pin = /bits/ 8 <0>;
nvmem-cells = <&cal_caldata_1000>, <&macaddr_uboot_4fc00 0>;
nvmem-cell-names = "calibration", "mac-address";
};
@ -380,9 +379,13 @@
*/
device-id = <0x0030>;
class-code = <0x028000>;
qca,led-pin = /bits/ 8 <0>;
nvmem-cells = <&cal_caldata_5000>, <&macaddr_uboot_4fc00 (-1)>;
nvmem-cell-names = "calibration", "mac-address";
led {
led-sources = <0>;
led-active-low;
};
};
};
};