packages/net/pbr/Makefile

201 lines
5.8 KiB
Makefile
Raw Normal View History

# Copyright 2017-2022 Stan Grishin (stangri@melmac.ca)
# This is free software, licensed under the GNU General Public License v3.
include $(TOPDIR)/rules.mk
PKG_NAME:=pbr
pbr: update to 1.1.1-1 *** MAKEFILE *** * remove libubus dependency as it was causing issues https://forum.openwrt.org/t/policy-based-routing-pbr-package-discussion/140639/318 * move firewall hotplug directory/file creation out of default section into pbr and pbr-iptables packages sections in preparation for dropping it from pbr * fix no new line after output when uninstalling packages *** UCI-DEFAULTS *** * only add firewall include to firewall config if the include file exists * add shellcheck exception to netifd uci-defaults file *** SCRIPTS *** * more informative logging for firewall and iface hotplug scripts * more informative logging for firewall include script *** SERVICE *** * introduce lock-file to prevent package starting on external events if it hasn't been auto- or manually started before * use the `ip`, not `ip-full` command to prevent errors on OpenWrt 21.02 * parse firewall WAN zone to append list of interfaces * append error and warning "arrays" with new messages * used shared memory to store the service output/logging messages * improve is_ovpn function to filter out false positives when interface names started with `tun` * introduce is_valid_ovpn to find OpenVPN tunnels where the device name in OpenVPN config matches the device name in network config * introduce opkg_get_version to compare versions of principal and luci packages * better code to obtain AdGuardHome version with betas installed * optimize code and add better logging for errors when inserting policies with iptables * optimize code and add better logging for errors when inserting policies with nft * bugfix: insert policies in all specified protocols * bugfix: support using physical devices in policies in nft mode * bugfix: use iptPrefix, not nftPrefix in iptables commands * implement Tor support in nft mode * bugfix: fix spelling for User File Syntax error * restart service fully (instead of quick reload) for OpenVPN interface events, as the order/number of supported interfaces * more verbose output (showing handles) of status in nft mode * improve `icmp_interface`, `ignored_interface`, `supported_interface` validation regexes * improve `interface`, validation regex Signed-off-by: Stan Grishin <stangri@melmac.ca>
2023-05-01 08:44:34 +08:00
PKG_VERSION:=1.1.1
PKG_RELEASE:=7
PKG_LICENSE:=GPL-3.0-or-later
PKG_MAINTAINER:=Stan Grishin <stangri@melmac.ca>
include $(INCLUDE_DIR)/package.mk
define Package/pbr/Default
SECTION:=net
CATEGORY:=Network
SUBMENU:=Routing and Redirection
TITLE:=Policy Based Routing Service
URL:=https://docs.openwrt.melmac.net/pbr/
pbr: update to 1.1.1-1 *** MAKEFILE *** * remove libubus dependency as it was causing issues https://forum.openwrt.org/t/policy-based-routing-pbr-package-discussion/140639/318 * move firewall hotplug directory/file creation out of default section into pbr and pbr-iptables packages sections in preparation for dropping it from pbr * fix no new line after output when uninstalling packages *** UCI-DEFAULTS *** * only add firewall include to firewall config if the include file exists * add shellcheck exception to netifd uci-defaults file *** SCRIPTS *** * more informative logging for firewall and iface hotplug scripts * more informative logging for firewall include script *** SERVICE *** * introduce lock-file to prevent package starting on external events if it hasn't been auto- or manually started before * use the `ip`, not `ip-full` command to prevent errors on OpenWrt 21.02 * parse firewall WAN zone to append list of interfaces * append error and warning "arrays" with new messages * used shared memory to store the service output/logging messages * improve is_ovpn function to filter out false positives when interface names started with `tun` * introduce is_valid_ovpn to find OpenVPN tunnels where the device name in OpenVPN config matches the device name in network config * introduce opkg_get_version to compare versions of principal and luci packages * better code to obtain AdGuardHome version with betas installed * optimize code and add better logging for errors when inserting policies with iptables * optimize code and add better logging for errors when inserting policies with nft * bugfix: insert policies in all specified protocols * bugfix: support using physical devices in policies in nft mode * bugfix: use iptPrefix, not nftPrefix in iptables commands * implement Tor support in nft mode * bugfix: fix spelling for User File Syntax error * restart service fully (instead of quick reload) for OpenVPN interface events, as the order/number of supported interfaces * more verbose output (showing handles) of status in nft mode * improve `icmp_interface`, `ignored_interface`, `supported_interface` validation regexes * improve `interface`, validation regex Signed-off-by: Stan Grishin <stangri@melmac.ca>
2023-05-01 08:44:34 +08:00
DEPENDS:=+ip-full +jshn +jsonfilter +resolveip
CONFLICTS:=vpnbypass vpn-policy-routing
PKGARCH:=all
endef
define Package/pbr
$(call Package/pbr/Default)
TITLE+= with nft/nft set support
DEPENDS+=+kmod-nft-core +kmod-nft-nat +nftables-json
VARIANT:=nftables
PROVIDES:=vpnbypass vpn-policy-routing
DEFAULT_VARIANT:=1
endef
define Package/pbr-iptables
$(call Package/pbr/Default)
TITLE+= with iptables/ipset support
DEPENDS+=+ipset +iptables +kmod-ipt-ipset +iptables-mod-ipopt
VARIANT:=iptables
PROVIDES:=pbr
endef
define Package/pbr-netifd
$(call Package/pbr/Default)
TITLE+= with netifd support
VARIANT:=netifd
PROVIDES:=pbr
endef
define Package/pbr/description
This service enables policy-based routing for WAN interfaces and various VPN tunnels.
This version supports OpenWrt with both firewall3/ipset/iptables and firewall4/nft.
endef
define Package/pbr-iptables/description
This service enables policy-based routing for WAN interfaces and various VPN tunnels.
This version supports OpenWrt with firewall3/ipset/iptables.
endef
define Package/pbr-netifd/description
This service enables policy-based routing for WAN interfaces and various VPN tunnels.
This version supports OpenWrt with both firewall3/ipset/iptables and firewall4/nft.
This version uses OpenWrt native netifd/tables to set up interfaces. This is WIP.
endef
define Package/pbr/conffiles
/etc/config/pbr
endef
Package/pbr-iptables/conffiles = $(Package/pbr/conffiles)
Package/pbr-netifd/conffiles = $(Package/pbr/conffiles)
define Build/Configure
endef
define Build/Compile
endef
define Package/pbr/default/install
$(INSTALL_DIR) $(1)/etc/init.d
$(INSTALL_BIN) ./files/etc/init.d/pbr.init $(1)/etc/init.d/pbr
$(SED) "s|^\(readonly PKG_VERSION\).*|\1='$(PKG_VERSION)-$(PKG_RELEASE)'|" $(1)/etc/init.d/pbr
$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
$(INSTALL_DATA) ./files/etc/hotplug.d/iface/70-pbr $(1)/etc/hotplug.d/iface/70-pbr
$(INSTALL_DIR) $(1)/etc/uci-defaults
$(INSTALL_BIN) ./files/etc/uci-defaults/90-pbr $(1)/etc/uci-defaults/90-pbr
$(INSTALL_DIR) $(1)/usr/share/pbr
$(INSTALL_DATA) ./files/usr/share/pbr/pbr.user.aws $(1)/usr/share/pbr/pbr.user.aws
$(INSTALL_DATA) ./files/usr/share/pbr/pbr.user.netflix $(1)/usr/share/pbr/pbr.user.netflix
endef
define Package/pbr/install
$(call Package/pbr/default/install,$(1))
$(INSTALL_DIR) $(1)/etc/config
$(INSTALL_CONF) ./files/etc/config/pbr $(1)/etc/config/pbr
pbr: update to 1.1.1-1 *** MAKEFILE *** * remove libubus dependency as it was causing issues https://forum.openwrt.org/t/policy-based-routing-pbr-package-discussion/140639/318 * move firewall hotplug directory/file creation out of default section into pbr and pbr-iptables packages sections in preparation for dropping it from pbr * fix no new line after output when uninstalling packages *** UCI-DEFAULTS *** * only add firewall include to firewall config if the include file exists * add shellcheck exception to netifd uci-defaults file *** SCRIPTS *** * more informative logging for firewall and iface hotplug scripts * more informative logging for firewall include script *** SERVICE *** * introduce lock-file to prevent package starting on external events if it hasn't been auto- or manually started before * use the `ip`, not `ip-full` command to prevent errors on OpenWrt 21.02 * parse firewall WAN zone to append list of interfaces * append error and warning "arrays" with new messages * used shared memory to store the service output/logging messages * improve is_ovpn function to filter out false positives when interface names started with `tun` * introduce is_valid_ovpn to find OpenVPN tunnels where the device name in OpenVPN config matches the device name in network config * introduce opkg_get_version to compare versions of principal and luci packages * better code to obtain AdGuardHome version with betas installed * optimize code and add better logging for errors when inserting policies with iptables * optimize code and add better logging for errors when inserting policies with nft * bugfix: insert policies in all specified protocols * bugfix: support using physical devices in policies in nft mode * bugfix: use iptPrefix, not nftPrefix in iptables commands * implement Tor support in nft mode * bugfix: fix spelling for User File Syntax error * restart service fully (instead of quick reload) for OpenVPN interface events, as the order/number of supported interfaces * more verbose output (showing handles) of status in nft mode * improve `icmp_interface`, `ignored_interface`, `supported_interface` validation regexes * improve `interface`, validation regex Signed-off-by: Stan Grishin <stangri@melmac.ca>
2023-05-01 08:44:34 +08:00
$(INSTALL_DIR) $(1)/usr/share/pbr
$(INSTALL_DATA) ./files/usr/share/pbr/pbr.firewall.include $(1)/usr/share/pbr/pbr.firewall.include
$(INSTALL_DIR) $(1)/usr/share/nftables.d
$(CP) ./files/usr/share/nftables.d/* $(1)/usr/share/nftables.d/
endef
define Package/pbr-iptables/install
$(call Package/pbr/default/install,$(1))
pbr: update to 1.1.1-1 *** MAKEFILE *** * remove libubus dependency as it was causing issues https://forum.openwrt.org/t/policy-based-routing-pbr-package-discussion/140639/318 * move firewall hotplug directory/file creation out of default section into pbr and pbr-iptables packages sections in preparation for dropping it from pbr * fix no new line after output when uninstalling packages *** UCI-DEFAULTS *** * only add firewall include to firewall config if the include file exists * add shellcheck exception to netifd uci-defaults file *** SCRIPTS *** * more informative logging for firewall and iface hotplug scripts * more informative logging for firewall include script *** SERVICE *** * introduce lock-file to prevent package starting on external events if it hasn't been auto- or manually started before * use the `ip`, not `ip-full` command to prevent errors on OpenWrt 21.02 * parse firewall WAN zone to append list of interfaces * append error and warning "arrays" with new messages * used shared memory to store the service output/logging messages * improve is_ovpn function to filter out false positives when interface names started with `tun` * introduce is_valid_ovpn to find OpenVPN tunnels where the device name in OpenVPN config matches the device name in network config * introduce opkg_get_version to compare versions of principal and luci packages * better code to obtain AdGuardHome version with betas installed * optimize code and add better logging for errors when inserting policies with iptables * optimize code and add better logging for errors when inserting policies with nft * bugfix: insert policies in all specified protocols * bugfix: support using physical devices in policies in nft mode * bugfix: use iptPrefix, not nftPrefix in iptables commands * implement Tor support in nft mode * bugfix: fix spelling for User File Syntax error * restart service fully (instead of quick reload) for OpenVPN interface events, as the order/number of supported interfaces * more verbose output (showing handles) of status in nft mode * improve `icmp_interface`, `ignored_interface`, `supported_interface` validation regexes * improve `interface`, validation regex Signed-off-by: Stan Grishin <stangri@melmac.ca>
2023-05-01 08:44:34 +08:00
$(INSTALL_DIR) $(1)/etc/hotplug.d/firewall
$(INSTALL_DATA) ./files/etc/hotplug.d/firewall/70-pbr $(1)/etc/hotplug.d/firewall/70-pbr
$(INSTALL_DIR) $(1)/etc/config
$(INSTALL_CONF) ./files/etc/config/pbr.iptables $(1)/etc/config/pbr
endef
define Package/pbr-netifd/install
$(call Package/pbr/default/install,$(1))
$(INSTALL_DIR) $(1)/etc/config
$(INSTALL_CONF) ./files/etc/config/pbr $(1)/etc/config/pbr
$(INSTALL_DIR) $(1)/etc/uci-defaults
$(INSTALL_BIN) ./files/etc/uci-defaults/91-pbr $(1)/etc/uci-defaults/91-pbr
endef
define Package/pbr/postinst
#!/bin/sh
# check if we are on real system
if [ -z "$${IPKG_INSTROOT}" ]; then
chmod -x /etc/init.d/pbr || true
fw4 -q reload || true
chmod +x /etc/init.d/pbr || true
echo -n "Installing rc.d symlink for pbr... "
/etc/init.d/pbr enable && echo "OK" || echo "FAIL"
fi
exit 0
endef
define Package/pbr/prerm
#!/bin/sh
# check if we are on real system
if [ -z "$${IPKG_INSTROOT}" ]; then
uci -q delete firewall.pbr || true
pbr: update to 1.1.1-1 *** MAKEFILE *** * remove libubus dependency as it was causing issues https://forum.openwrt.org/t/policy-based-routing-pbr-package-discussion/140639/318 * move firewall hotplug directory/file creation out of default section into pbr and pbr-iptables packages sections in preparation for dropping it from pbr * fix no new line after output when uninstalling packages *** UCI-DEFAULTS *** * only add firewall include to firewall config if the include file exists * add shellcheck exception to netifd uci-defaults file *** SCRIPTS *** * more informative logging for firewall and iface hotplug scripts * more informative logging for firewall include script *** SERVICE *** * introduce lock-file to prevent package starting on external events if it hasn't been auto- or manually started before * use the `ip`, not `ip-full` command to prevent errors on OpenWrt 21.02 * parse firewall WAN zone to append list of interfaces * append error and warning "arrays" with new messages * used shared memory to store the service output/logging messages * improve is_ovpn function to filter out false positives when interface names started with `tun` * introduce is_valid_ovpn to find OpenVPN tunnels where the device name in OpenVPN config matches the device name in network config * introduce opkg_get_version to compare versions of principal and luci packages * better code to obtain AdGuardHome version with betas installed * optimize code and add better logging for errors when inserting policies with iptables * optimize code and add better logging for errors when inserting policies with nft * bugfix: insert policies in all specified protocols * bugfix: support using physical devices in policies in nft mode * bugfix: use iptPrefix, not nftPrefix in iptables commands * implement Tor support in nft mode * bugfix: fix spelling for User File Syntax error * restart service fully (instead of quick reload) for OpenVPN interface events, as the order/number of supported interfaces * more verbose output (showing handles) of status in nft mode * improve `icmp_interface`, `ignored_interface`, `supported_interface` validation regexes * improve `interface`, validation regex Signed-off-by: Stan Grishin <stangri@melmac.ca>
2023-05-01 08:44:34 +08:00
echo "Stopping pbr service... "
/etc/init.d/pbr stop && echo "OK" || echo "FAIL"
echo -n "Removing rc.d symlink for pbr... "
/etc/init.d/pbr disable && echo "OK" || echo "FAIL"
fi
exit 0
endef
define Package/pbr/postrm
#!/bin/sh
# check if we are on real system
if [ -z "$${IPKG_INSTROOT}" ]; then
fw4 -q reload || true
fi
exit 0
endef
define Package/pbr-iptables/postinst
#!/bin/sh
# check if we are on real system
if [ -z "$${IPKG_INSTROOT}" ]; then
echo -n "Installing rc.d symlink for pbr-iptables... "
/etc/init.d/pbr enable && echo "OK" || echo "FAIL"
fi
exit 0
endef
define Package/pbr-iptables/prerm
#!/bin/sh
# check if we are on real system
if [ -z "$${IPKG_INSTROOT}" ]; then
uci -q delete firewall.pbr || true
pbr: update to 1.1.1-1 *** MAKEFILE *** * remove libubus dependency as it was causing issues https://forum.openwrt.org/t/policy-based-routing-pbr-package-discussion/140639/318 * move firewall hotplug directory/file creation out of default section into pbr and pbr-iptables packages sections in preparation for dropping it from pbr * fix no new line after output when uninstalling packages *** UCI-DEFAULTS *** * only add firewall include to firewall config if the include file exists * add shellcheck exception to netifd uci-defaults file *** SCRIPTS *** * more informative logging for firewall and iface hotplug scripts * more informative logging for firewall include script *** SERVICE *** * introduce lock-file to prevent package starting on external events if it hasn't been auto- or manually started before * use the `ip`, not `ip-full` command to prevent errors on OpenWrt 21.02 * parse firewall WAN zone to append list of interfaces * append error and warning "arrays" with new messages * used shared memory to store the service output/logging messages * improve is_ovpn function to filter out false positives when interface names started with `tun` * introduce is_valid_ovpn to find OpenVPN tunnels where the device name in OpenVPN config matches the device name in network config * introduce opkg_get_version to compare versions of principal and luci packages * better code to obtain AdGuardHome version with betas installed * optimize code and add better logging for errors when inserting policies with iptables * optimize code and add better logging for errors when inserting policies with nft * bugfix: insert policies in all specified protocols * bugfix: support using physical devices in policies in nft mode * bugfix: use iptPrefix, not nftPrefix in iptables commands * implement Tor support in nft mode * bugfix: fix spelling for User File Syntax error * restart service fully (instead of quick reload) for OpenVPN interface events, as the order/number of supported interfaces * more verbose output (showing handles) of status in nft mode * improve `icmp_interface`, `ignored_interface`, `supported_interface` validation regexes * improve `interface`, validation regex Signed-off-by: Stan Grishin <stangri@melmac.ca>
2023-05-01 08:44:34 +08:00
echo "Stopping pbr-iptables service... "
/etc/init.d/pbr stop && echo "OK" || echo "FAIL"
echo -n "Removing rc.d symlink for pbr-iptables... "
/etc/init.d/pbr disable && echo "OK" || echo "FAIL"
fi
exit 0
endef
define Package/pbr-netifd/postinst
#!/bin/sh
# check if we are on real system
if [ -z "$${IPKG_INSTROOT}" ]; then
echo -n "Installing rc.d symlink for pbr-netifd... "
/etc/init.d/pbr enable && echo "OK" || echo "FAIL"
fi
exit 0
endef
define Package/pbr-netifd/prerm
#!/bin/sh
# check if we are on real system
if [ -z "$${IPKG_INSTROOT}" ]; then
uci -q delete firewall.pbr || true
pbr: update to 1.1.1-1 *** MAKEFILE *** * remove libubus dependency as it was causing issues https://forum.openwrt.org/t/policy-based-routing-pbr-package-discussion/140639/318 * move firewall hotplug directory/file creation out of default section into pbr and pbr-iptables packages sections in preparation for dropping it from pbr * fix no new line after output when uninstalling packages *** UCI-DEFAULTS *** * only add firewall include to firewall config if the include file exists * add shellcheck exception to netifd uci-defaults file *** SCRIPTS *** * more informative logging for firewall and iface hotplug scripts * more informative logging for firewall include script *** SERVICE *** * introduce lock-file to prevent package starting on external events if it hasn't been auto- or manually started before * use the `ip`, not `ip-full` command to prevent errors on OpenWrt 21.02 * parse firewall WAN zone to append list of interfaces * append error and warning "arrays" with new messages * used shared memory to store the service output/logging messages * improve is_ovpn function to filter out false positives when interface names started with `tun` * introduce is_valid_ovpn to find OpenVPN tunnels where the device name in OpenVPN config matches the device name in network config * introduce opkg_get_version to compare versions of principal and luci packages * better code to obtain AdGuardHome version with betas installed * optimize code and add better logging for errors when inserting policies with iptables * optimize code and add better logging for errors when inserting policies with nft * bugfix: insert policies in all specified protocols * bugfix: support using physical devices in policies in nft mode * bugfix: use iptPrefix, not nftPrefix in iptables commands * implement Tor support in nft mode * bugfix: fix spelling for User File Syntax error * restart service fully (instead of quick reload) for OpenVPN interface events, as the order/number of supported interfaces * more verbose output (showing handles) of status in nft mode * improve `icmp_interface`, `ignored_interface`, `supported_interface` validation regexes * improve `interface`, validation regex Signed-off-by: Stan Grishin <stangri@melmac.ca>
2023-05-01 08:44:34 +08:00
echo "Stopping pbr-netifd service... "
/etc/init.d/pbr stop && echo "OK" || echo "FAIL"
echo -n "Removing rc.d symlink for pbr... "
/etc/init.d/pbr disable && echo "OK" || echo "FAIL"
fi
exit 0
endef
$(eval $(call BuildPackage,pbr))
$(eval $(call BuildPackage,pbr-iptables))
#$(eval $(call BuildPackage,pbr-netifd))