The config.yml is an example of a tunnel local configuration.
But the cloudlfared treat it as a real config and fails to start.
So to avoid problems let's comment all the statements.
The `url: http://localhost:8000` is not a valid config option.
Additionally add a smale of configuring ingres rules.
The cloudflared.config has missing option token.
Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
The following fixes have been applied to Makefile:
* fix the nebula license type
* add PKG_CPE_ID
* remove unneeded call to Build/Compile
* add leading spaces to descriptions
* add Package/nebula/conffiles definition
* remove unneeded /lib/upgrade/keep.d files
* no longer install actual license file
* add the README file
Kudos to @BKPepe and @1715173329 for feedback which lead to these fixes
Signed-off-by: Stan Grishin <stangri@melmac.ca>
Maintainer: @mkrkn @neheb
Compile tested: armv7, cortexA15, OpenWRT 23.05
Run tested: Linksys EA8500
Compile tested: armv8, cortexA53, OpenWRT main
Run tested: Dynalink DL-WRX36
Description:
Script-security is always 2 and cannot be changed from the openvpn config file due to a missing rule in openvpn.init.
This is discussed in issue #23014
This patch adds the missing rule in openvpn.init to parse script-security from the openvpn config file.
Signed-off-by: Erik Conijn <egc112@msn.com>
also fix license variable
Co-authored-by: Tianling Shen <cnsztl@gmail.com>
Signed-off-by: Otto Moerbeek <otto@drijf.net>
Signed-off-by: Peter van Dijk <peter.van.dijk@powerdns.com>
Upstream bump
,,_ -*> Snort++ <*-
o" )~ Version 3.1.78.0
'''' By Martin Roesch & The Snort Team
http://snort.org/contact#team
Copyright (C) 2014-2024 Cisco and/or its affiliates. All rights reserved.
Copyright (C) 1998-2013 Sourcefire, Inc., et al.
Using DAQ version 3.0.14
Using LuaJIT version 2.1.0-beta3
Using OpenSSL 3.0.12 24 Oct 2023
Using libpcap version 1.10.4 (with TPACKET_V3)
Using PCRE version 8.45 2021-06-15
Using ZLIB version 1.3
Using Hyperscan version 5.4.2 2024-01-15
Using LZMA version 5.4.4
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
The log is filled with 'debug' messages. This is not necessary and is
only normaly needed during development. To suppress this message, check
whether the level is 'debug' and if so, suppress it. If this message is
required again, the message can be generated by commenting out this line.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Before this change, the status of the sysfs paths from the kernel events
was cached with a cache file. This is necessary to mark configured modems
as available for the netifd.
Using the new monitor service via the mmcli command 'mmcli -M' simplifies
the whole process. There is no need to start sub shells in the background
anymore that monitors whether the modem has already been added to the
ModemManager.
For this purpose, a new service was added that reacts on add and remove
events for modems in the ModemManager and, if necessary, marks the logical
netifd interface as available.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
These moved functions are general functions. This is a preparatory
commit so that these moved functions can also be used in other
ModemManager scripts.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
The modem saves the permitted technology configuration in the modem
itself. If the technology configuration is deleted in the uci, this is
not passed on to the modem. This means that the previously saved
technology configuration is remains in the modem and is therefore still
active. By setting the technology to 'any', if no option is set, all
technologies are allowed again.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Modify Makefile to combine tailscale and tailscaled according to
Tailscale documentatio (https://tailscale.com/kb/1207/small-tailscale)
This resulted for x86_64 in an exec of 31MB + the symlink. Before it
was 29MB (tailscaled) and 10MB (tailscale).
Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
0cffba9458d3 treewide: add support for RADIUS Reply-Message
c9fb744fdee8 treewide: add support for 'lang=' & ChilliSpot-Lang
584a162cb19a handler-uam: ensure that 'seconds_remaining' is always set
bd1f7c5de1ae Makefile: align with packages feed one
0ea6ad3c4e54 Makefile: mark uspot-www and uspotfilter "PKGARCH:=all"
e6a286ccfdbf uspot/uspotfilter: use 'logger -t'
427ed16cfde5 uspot: expose ratelimits in client data
4ba1dd9c5135 uspot: don't send NAS-Port-Type
78a37ef49b85 templates: add id="replymsg" to reply msg header
e3f4e179fd17 templates: show remaining time in "connected"
398762dff711 radius-client: correctly use str_to_hex()
730ef800d9da templates: simplify HTML
6bb39282fd8f Documentation update
b6c802adac19 portal: handle_request() logic refactoring
1aa1a5eb28d7 uspotfilter: implement peer_lookup()
ba5547ec61f1 portal: speedup peer lookup by leveraging spotfilter
d551376c29bb templates: added html5 time tag to timeleft output
154c98e0b77b uspotfilter: mark client as active when set()
8dcb03a37a77 uspotfilter: rework neigh management
cfb2ce7909da uspotfilter: use client_remove() where applicable
8411314dbf90 Documentation update
8dacf3df9935 uspot: use a single operation for client removal
297b7857c1e0 uspotfilter: fix DELNEIGH processing
76003917c205 uspotfilter: client_set() only clear idle when allowing
f46a855c5085 uspotfilter: remove botched IPv6 "support"
4ff31cbf0e2b uspot: client_remove(): stay in sync with spotfilter
edc9ad7e60a3 uspot/uspotfilter: use ucode-mod-log for logging
52e24aecf2db uspotfilter: use ucode '??=' syntax
c4b6f2f0bb1e Update README
Update the package Makefile to reflect the changes from the following
above-listed commits:
0ea6ad3c4e54 Makefile: mark uspot-www and uspotfilter "PKGARCH:=all"
edc9ad7e60a3 uspot/uspotfilter: use ucode-mod-log for logging
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
New features for v1.8.0:
1. Migrate cache file from Clash API to independent options
2. Introducing Rule Set
3. Add `sing-box geoip`, `sing-box geosite` and `sing-box rule-set` commands
4. Allow nested logical rules
5. Independent `source_ip_is_private` and `ip_is_private` rules
6. Add context to JSON decode error message
7. Reject internal fake-ip queries
8. Add GSO support for TUN and WireGuard system interface
9. The legacy LWIP stack has been deprecated and removed
10. Add `idle_timeout` for URLTest outbound
11. Added some new uTLS fingerprints
...
Release notes: https://github.com/SagerNet/sing-box/releases/tag/v1.8.0
The new version has some breaking changes and may stop working after upgrading if use the original config.
Please see the migration manual to migrate the config: https://sing-box.sagernet.org/migration/
Signed-off-by: Anya Lin <hukk1996@gmail.com>
* fix a station scanning issue on single radio units (mainly a LuCI/JS issue) reported in the forum by multiple users
Signed-off-by: Dirk Brenken <dev@brenken.org>
Fixes: e0d7181a6Closes: #22973Closes: #22988
1. Make the new `startup()` function in `/usr/bin/wifi_schedule.sh`
respect the global `enabled` config flag; in particular, make no
changes to `/etc/config/wireless` when wifi_schedule is disabled.
2. Make the new `/etc/init.d/wifi_schedule` service script executable.
Signed-off-by: Rani Hod <rani.hod@gmail.com>
Allow use of rules as-defined, and don't override their actions. This
is generally the best way to use the ruleset, and overriding their
actions should only be undertaken when you fully understand how it
affects their use.
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
This PR adds the ability of snort to process rules that target
swf and pdf files requiring lzma decompression to look for
malicious payloads therein. This change only increases the size
of the snort3 executable by a fraction of a KB and the added
dependency of liblzma (based on currently offered 5.4.4-1) is
only a 169 KB shared object. Based on CPU requirements of snort,
x86 users likely represent the majority user-base and space their
rootfs is not an issue as it may be for lower-powered SoCs.
Size of snort3-3.1.76.0-2: 7354403 bytes
Size of snort3-3.1.76.0-3: 7354435 bytes
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
Maintainer: @mkrkn @neheb
Compile tested: aarch64, cortex-a53, OpenWRT Master
Run tested: Dynalink DL-WRX36
Description:
[A previous commit](f8a8b71e26) has added more script event options.
However it looked like that commit was not complete as it stops the use of the script events route-up, route-pre-down, and ipchange when those are placed in the openvpn config file.
This PR fixes a regression that makes it problematic to specify certain event options in the OpenVPN configuration file.
Discussion in [this thread](https://forum.openwrt.org/t/openvpn-custom-route-up-script-in-23-05-rc2/167105/13) and [here](https://forum.openwrt.org/t/openvpn-route-up-and-route-pre-down-broken-in-23-05/176568)
Please have a look and consider implementing or make it possible to use all script event options in the openvpn config file in another way.
Pull request has been discussed and improved with the help of @AuthorReflex, see: https://github.com/openwrt/packages/pull/21732
Signed-off-by: Erik Conijn <egc112@msn.com>
* rework the device/interface auto-detection (only layer-3 network devices will be detetcted correctly), disable the auto-detection e.g. for special tunnel interfaces
* supports now full gawk (preferred, if installed) and busybox awk
* raise the default boot timeout to 20 seconds (if 'ban_triggerdelay' is not set)
* various small fixes and improvements
* readme update
Signed-off-by: Dirk Brenken <dev@brenken.org>
Remove append_params and use shell expressions instead e.g. ${port:+-p $port}.
Note that we can't do that with ProxyCommand because it has to be quoted.
The order of options was changed from more important like hostname to just static -nN.
The CompressionLevel option is removed from SSH2.
Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
The ProxyCommand may have spaces so it must be quoted.
So we must use the procd_append_param.
Currently the option is not supported by Dropbear.
But it has -J instead which in OpenSSH means ProxyJump.
So we can't use it to avoid conflict.
Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
Changelog: https://github.com/snort3/snort3/releases/tag/3.1.77.0
,,_ -*> Snort++ <*-
o" )~ Version 3.1.77.0
'''' By Martin Roesch & The Snort Team
http://snort.org/contact#team
Copyright (C) 2014-2023 Cisco and/or its affiliates. All rights reserved.
Copyright (C) 1998-2013 Sourcefire, Inc., et al.
Using DAQ version 3.0.13
Using LuaJIT version 2.1.0-beta3
Using OpenSSL 3.0.12 24 Oct 2023
Using libpcap version 1.10.4 (with TPACKET_V3)
Using PCRE version 8.45 2021-06-15
Using ZLIB version 1.3
Using Hyperscan version 5.4.2 2023-12-20
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
v0.20.0:
- GNUNET_TESTING_get_testname_from_underscore renamed to GNUNET_STRINGS_get_suffix_from_binary_name and moved from libgnunettesting to libgnuneutil
- Move GNUNET_s into libgnunetutil.
- re-introduce compiler annotation for array size in signature
- function-signature adjustment due to compiler error
- GNUNET_PQ_get_oid removed, GNUNET_PQ_get_oid_by_name improved
- Added GNUNET_PQ_get_oid_by_name
- added GNUNET_PQ_get_oid()
- Added new CCA-secure KEM and use in IDENTITY encryption
- Add KEM API to avoid ephemeral private key management
- Add new GNUNET_PQ_event_do_poll() API to gnunet_pq_lib.h
- Added API to support arrays in query results
- Improve PQ API documentation.
- API for array types extended for times
- API extended for array query types
- relevant array-types in queries (not results) in postgresql added
- just style fixes, int to enum
- initial steps towards support of array-types in posgresql
- adds GNUNET_JSON_spec_object_const() and GNUNET_JSON_spec_array_const()
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Konstantin Demin