It seems that PR #24113 introduced incorrect hashes for multiple packages.
So, lets fix all of them at once.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Due to the change in the version description, the package must be
downloaded again. In addition, the standard compression method has changed
to zst. The checksum must therefore be recalculated.
Fixes: 22f8fd5c5b ("modemmanager: add missing PKG_VERSION for APK")
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
With the recent move to using ZSTD as the default compression format
for packaging git repo clones we must refresh all of the hashes for
the packages feed as well.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Virtual netdevices created for multiplexing should not be skipped
when reporting events, otherwise it is not possible to setup the
data connection.
Add these exceptions in mm_report_event function.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
If a 'plmn' is set in the configuration, a registration attempt should be
established before the simple-connect command. If the plmn is set during
the simple-connect, a network change may occur during the connection setup.
To prevent this, the registration is started before the simple-connect with
a separate mmcli command. So that we can be sure that the modem is already
registered in the correct network before the simple-connect command.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Moving the openwrt related files to subdirectories as they are installed
on the system. This change makes it immediately apparent during development
where the file is to be installed in the running system.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Before this change, the status of the sysfs paths from the kernel events
was cached with a cache file. This is necessary to mark configured modems
as available for the netifd.
Using the new monitor service via the mmcli command 'mmcli -M' simplifies
the whole process. There is no need to start sub shells in the background
anymore that monitors whether the modem has already been added to the
ModemManager.
For this purpose, a new service was added that reacts on add and remove
events for modems in the ModemManager and, if necessary, marks the logical
netifd interface as available.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
The modem saves the permitted technology configuration in the modem
itself. If the technology configuration is deleted in the uci, this is
not passed on to the modem. This means that the previously saved
technology configuration is remains in the modem and is therefore still
active. By setting the technology to 'any', if no option is set, all
technologies are allowed again.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
If no GSM but only 4G is available and a special APN must be used, it
is necessary to set an inital EPS bearer beforehand. If this is not set,
then modem cannot log in and register in the mobile network.
The new option 'init_epsbearer' could be set to the following options.
* none: No init EPS bearer is used and the old one is deleted (default)
* default: Use init EPS bearer with the following config options
'iptype', 'allowedauth', 'password', 'user' and 'apn' as for the
connection bearer.
* custom: Other parameters are used that do not match those of the
default connection bearer. These have an 'init_' prefix and are named
in the same way as the default connection bearer config options.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
With this change the following modem 'state' are checked before a
connection attempt setup.
* failed: Stop connection attempt because of sim-missing
* locked: Stop connection attempt if no pincode is set
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
If the ModemManager process crashes, the interfaces are not cleaned
up properly because the stop_service method is not called. With this
change, the interfaces are cleaned up both when stopping the service
and during a crash. Therefore it is no longer necessary to perform a
cleanup at the beginning.
Signed-off-by: Oliver Sedlbauer <osedlbauer@tdt.de>
Change workflow to cleanup interfaces using the sysfscache.
The sysfscache stores the processed sysfs-paths. Using this
instead of mmcli -L, the interfaces can be properly cleaned
up even if, for example, ModemManager crashes and mmcli is
no longer usable.
Signed-off-by: Oliver Sedlbauer <osedlbauer@tdt.de>
At mm_report_modem_wait a wait status is set. When attempting to report
an event (via hotplug or during startup) and the DBus is not yet available,
the status in the sysfs cache is set to 'processed' incorrectly, even
if mmcli fails.
This is fixed by aborting the operation and logging an error when
the kernel report fails.
Signed-off-by: Oliver Sedlbauer <osedlbauer@tdt.de>
The mm_report_events_from_cache method is called during the startup and
informs the ModemManager of kernel events. Additionally, hotplug scripts
inform the ModemManager of kernel events. Processed events are stored in
the sysfs cache. It is possible for a hotplug script to write to the
sysfs cache while the mm_report_events_from_cache method is still waiting
for the ModemManager to be available on the bus during startup.
This could lead to a misbehavior where modems are not recognized.
To ensure a clean state on startup, the sysfs cache is cleared after the
ModemManager is available, ensuring reliable processing of kernel events.
Signed-off-by: Oliver Sedlbauer <osedlbauer@tdt.de>
The PKG_RELEASE was not incremented during the last merge, the commit shows
that it is incremented by one, but this was already done during the last
change. Very strange. Hence this commit which increments PKG_RELEASE by
one.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
To begin with, there are only a couple of .conf files, and
one of them is for testing, and the other is only installed
when MBIM is enabled, so if you build without MBIM you'll
have a failing install:
install -m0644 /home/pprindeville/work/openwrt/build_dir/target-x86_64_musl/modemmanager-1.20.6/ipkg-install/usr/share/ModemManager/*.conf /home/pprindeville/work/openwrt/build_dir/target-x86_64_musl/modemmanager-1.20.6/.pkgdir/modemmanager/usr/share/ModemManager
install: cannot stat '/home/pprindeville/work/openwrt/build_dir/target-x86_64_musl/modemmanager-1.20.6/ipkg-install/usr/share/ModemManager/*.conf': No such file or directory
make[2]: *** [Makefile:161: /home/pprindeville/work/openwrt/build_dir/target-x86_64_musl/modemmanager-1.20.6/.pkgdir/modemmanager.installed] Error 1
make[2]: Leaving directory '/home/pprindeville/work/openwrt/feeds/packages/net/modemmanager'
So make sure there's anything there to copy over first.
Signed-off-by: Philip Prindeville <pprindeville@netgate.com>
In order to use the dbus interfaces via the command gdbus-codegen, the
xml files must be copied into the building staging directory, so that other
programmes can use them during compilation.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
The line to generate the argument list for 'simple connect' is quite
long and is not maintainable. To improve the handling a function
'append_param' was added for appending the 'simple connect' options.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Francisco Jose Alvarez <francisco.alvarez@galgus.net>
* Update commit head
* Rebase patch to the latest changes
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
If on teardown the 'proto_notify_error' is set to 'MM_TEARDOWN_IN_PROGRESS',
then an error which is set on 'setup' is not visible in the ubus
network.interface.<iface> status output.
{
"up": false,
"pending": false,
"available": true,
"autostart": false,
"dynamic": false,
"proto": "modemmanager",
"data": {
},
"errors": [
{
"subsystem": "dualsim",
"code": "MM_TEARDOWN_IN_PROGRESS"
}
]
}
It alway shows the code 'MM_TEARDWON_IN_PROGRESS'!
By removing the line 'proto_notify_error "${interface}" MM_TEARDOWN_IN_PROGRESS'
in teardown, the last error is show in the proto stack from setup.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
If an alias name is used for the modem, then a check if the device exists
in sysfs does not work. To fix this remove the check if the sysfs device
exists. The protocoll handler already checks if the modem is responsible
for this device on the next line.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
On small systems with many virtual devices, the modem manager sometimes
could not start because it took too long until all devices for the modem
were recognised. This is because all system events that are stored in
the file events.cache have to be processed. To speed up the processing,
all devices under /sys/devices/virtual are now filtered out so that they
do not have to be processed.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
See commit da370098 "treewide: add support for "gc-sections" in
PKG_BUILD_FLAGS" on the main repository.
Note: This only touches packages which use all three parts
(-ffunction-sections, -fdata-sections and -Wl,--gc-sections) enabled by
this build flag. Some packages only use a subset, and these are left
unchanged for now.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Using https://gitlab.freedesktop.org/mobile-broadband/ModemManager.git to download the source code.
Added compile option to compile qrtr support.
Enabled lto and additional gcc flags for perfomance and less size.
Modified to use meson as upstream has abandoned autotools.
Removed BUILD_PARALLEL options. These are default with ninja/meson.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
The way the init script is written now, we get a bad output when calling
the ubus service backend.
ubus call service list "{'verbose':true,'name':'modemmanager'}"
>{
> "modemmanager": {
> "instances": {
> "instance1": {
> "running": true,
> "pid": 20511,
> "command": [
> "sh",
> "-c",
> ".
>/usr/share/ModemManager/modemmanager.common; \t
>mkdir -m 0755 -p /var/run/modemmanager; \t
>mm_cleanup_interfaces; \t
>( mm_report_events_from_cache ) >/dev/null 2>&1 & \t
>/usr/sbin/ModemManager"
> ],
> "term_timeout": 5,
> "respawn": {
> "threshold": 3600,
> "timeout": 5,
> "retry": 5
> },
> "pidfile":"/var/run/modemmanager/modemmanager.pid"
> }
> }
> }
>}"
I also get the output in the log that the PID file cannot be created.
> daemon.err procd: Failed to remove pidfile: :No such file or directory
The changes in this commit fixes this issues, by moving startup into a
wrapper script.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
WWAN devices may now be exposed in the new 'wwan' subsystem in the
kernel (since 5.13), initially applicable to devices exposed in PCIe
(no USB), but at some point may also apply to USB devices that until
now were exposed via other subsystems (e.g. usbmisc, tty).
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Robert Marko