Beep is a target-independent software that can handle buzzers controlled by kmod-gpio-beeper.
This change is useful for some non-x86 enterprise APs and development boards
that have a buzzer connected to GPIO.
Compile-tested: ath79, ELECOM WAB-I1750-PS, 3fab4ac + device support patch
Run-tested: ath79, ELECOM WAB-I1750-PS, 3fab4ac + device support patch
Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
On few places, shellcheck gets confused by how some OpenWrt functions
work - especially load ones. Also on few places there are $options
variables that need not to be globbed. Could be rewritten better not to
need them, but I'll do major rewrites later in separate pull request.
Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com>
Just to make sure, add double quotes around strings and various
variables. In some cases it could prevent some issues, in other cases it
is just a good practice.
Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com>
policycoreutils was reworked in master.
Added PKG_BUILD_PARALLEL for faster compilation.
Reorganized some stuff for consistency.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
According to https://bugs.gentoo.org/301782 coreutils does not respect
--without-selinux correctly when libselinux.so is present on the target
system (in the staging dir).
This solves a weird issue of some coreutils programs not building (for
example stdbuf), because the configure script uses -Werror to determine
whether __attribute__((constructor)) is respected, but -Werror causes
compilation to fail because of a warning about redefinition of
HAVE_SELINUX_SELINUX_H macro.
Signed-off-by: Marek Behún <kabel@blackhole.sk>
Run trivial check if the compiled binary works on the architecture. Do
so by comparing the printed version by the binary with the Makefile
version. The release is OpenWrt specific, so cut it off.
Signed-off-by: Paul Spooren <mail@aparcar.org>
This release is built with Go 1.15, which deprecates X.509 CommonName
in TLS certificates validation.
In the unlikely case that you use the gRPC API v2 (which is limited to TSDB
admin commands), please note that we will remove this experimental API in the
next minor release 2.22.
[CHANGE] Disable HTTP/2 because of concerns with the Go HTTP/2 client. #7588#7701
[CHANGE] PromQL: query_log_file path is now relative to the config file. #7701
[CHANGE] Promtool: Replace the tsdb command line tool by a promtool tsdb subcommand. #6088
[CHANGE] Rules: Label rule_group_iterations metric with group name. #7823
[FEATURE] Eureka SD: New service discovery. #3369
[FEATURE] Hetzner SD: New service discovery. #7822
[FEATURE] Kubernetes SD: Support Kubernetes EndpointSlices. #6838
[FEATURE] Scrape: Add per scrape-config targets limit. #7554
[ENHANCEMENT] Support composite durations in PromQL, config and UI, e.g. 1h30m. #7713#7833
[ENHANCEMENT] DNS SD: Add SRV record target and port meta labels. #7678
[ENHANCEMENT] Docker Swarm SD: Support tasks and service without published ports. #7686
[ENHANCEMENT] PromQL: Reduce the amount of data queried by remote read when a subquery has an offset. #7667
[ENHANCEMENT] Promtool: Add --time option to query instant command. #7829
[ENHANCEMENT] UI: Respect the --web.page-title parameter in the React UI. #7607
[ENHANCEMENT] UI: Add duration, labels, annotations to alerts page in the React UI. #7605
[ENHANCEMENT] UI: Add duration on the React UI rules page, hide annotation and labels if empty. #7606
[BUGFIX] API: Deduplicate series in /api/v1/series. #7862
[BUGFIX] PromQL: Drop metric name in bool comparison between two instant vectors. #7819
[BUGFIX] PromQL: Exit with an error when time parameters can't be parsed. #7505
[BUGFIX] Remote read: Re-add accidentally removed tracing for remote-read requests. #7916
[BUGFIX] Rules: Detect extra fields in rule files. #7767
[BUGFIX] Rules: Disallow overwriting the metric name in the labels section of recording rules. #7787
[BUGFIX] Rules: Keep evaluation timestamp across reloads. #7775
[BUGFIX] Scrape: Do not stop scrapes in progress during reload. #7752
[BUGFIX] TSDB: Fix chunks.HeadReadWriter: maxt of the files are not set error. #7856
[BUGFIX] TSDB: Delete blocks atomically to prevent corruption when there is a panic/crash during deletion. #7772
[BUGFIX] Triton SD: Fix a panic when triton_sd_config is nil. #7671
[BUGFIX] UI: Fix react UI bug with series going on and off. #7804
[BUGFIX] UI: Fix styling bug for target labels with special names in React UI. #7902
[BUGFIX] Web: Stop CMUX and GRPC servers even with stale connections, preventing the server to stop on SIGTERM. #7810
Signed-off-by: Paul Spooren <mail@aparcar.org>
Auditd seems to build its own libev if the library is not already present;
otherwise it uses the system-installed library. This adds libev as a
dependency to ensure a consistent build.
Signed-off-by: W. Michael Petullo <mike@flyn.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[update to 3.1, make use of Python 3, and update dependencies]
Signed-off-by: W. Michael Petullo <mike@flyn.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[strip library after adding it to openwrt repository]
Signed-off-by: W. Michael Petullo <mike@flyn.org>
Similar to `syncthing` also `prometheus` build environment sets
variables later shown in the `--version` string. Set those varialbes.
Signed-off-by: Paul Spooren <mail@aparcar.org>
* The upstream script changed to use `.hosts` files from `.conf` files,
so changes were required to make dnsmasq use the new file format.
* Added a default wolfssl variant.
Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>
This release adds the advanced folder option caseSensitiveFS
(https://docs.syncthing.net/advanced/folder-caseSensitiveFS.html) to
disable the new safe handling of case insensitive filesystems.
Bugfixes:
#1787: Case-only renames break stuff
#5708: Properly handle upper-/lowercase-only file name collisions
#6613: TestWatchRename test fails on FreeBSD.
#6793: Error status should take precedence over Local Additions
#6850: Global state incorrect when ignoring local change
#6864: Folder incorrectly marked “Up to Date” after switching from “Receive Only” to “Send & Receive”
#6867: Certificate error when built with Go 1.15
#6886: chmod permission after editing .stignore via WebUI not preserved
#6889: test failures with Go 1.15
#6892: Syncthing 1.8.0 trying to connect via wrong network route
#6898: tests in TestCopyRange fail on ppc64le with "inappropriate ioctl for device"
#6908: NAT service fails to terminate during Shutdown
#6910: Local Additions when deleting file after changing folder type from SR to RO
#6922: Auto accepted folders not saved
#6938: Modifying config during first scan corrupts folder state
Enhancements:
#2739: Syncthing should be case insensitive by default
#5579: Avoid anti-aliasing artifacts for svg device icons
#6873: Don't fail dirs in receive-only folders that were removed elsewhere but exist locally
Signed-off-by: Paul Spooren <mail@aparcar.org>
Changes:
- Pass compiler flags through PORT_CFLAGS (previously, it was always compiled with -O2 -lrt)
- Add option to override toolchain and use -O3
- Disable MIPS16 (highly decreases results)
- Enable LTO
Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
Update collectd to version 5.12.0.
* Refresh patches
* Remove upstreamed patch 920-fix-ubi-data-source-type.patch
* Backport a patch from upstream to fix a missing define
(920-backport-netlink-reg-noerror.patch)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The rb532 target has finally been removed in master, so drop the
dependencies in this package.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
The ar71xx target has finally been removed in master, so drop the
dependencies in this package.
Don't remove the patch for the TEW673GRU driver, as it may come
back with ath79.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Description: uhubctl is a utility that allows you to control USB power
on USB hubs that implement per-port or ganged power switching.
Signed-off-by: Steven Honson <steven@honson.id.au>
Cleaned up Makefile for consistency between packages.
Fixed license information.
Added PKG_BUILD_PARALLEL for faster compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Maintainer: @blogic me
Compile tested: head r14241-ba2ddba, x86_64
Run tested: x86_64 (VirtualBox)
Description:
Addressed the build failure with node.js version 12.
https://github.com/openwrt/packages/pull/12225
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
Add license information.
Add PKG_INSTALL and PKG_BUILD_PARALLEL for consistency between packages.
Minor cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
There are intermittent build failures on the buildbots because of this.
I see the same build failures locally as well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
usleep is deprecated.
Modernized the Makefile to modern standards.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5969273ff4 mistakenly got rid of the
install section for canutils, causing errors when trying to install.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
command-count.h generated by makefile was wrong
when using default shell in mac,
set shell to bash to fix it.
Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
LVM2 uses libselinux if found at buildtime and then requires it to
be present on run-time.
As LVM2 is usually not installed on space-constraint systems just
always build with libselinux as apart from the extra space usage it
doesn't hurt.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This was caused by upstream project commit db5adeaa ("build-sys: clean
up flags included in the linker command line")
Reported-by: W. Michael Petullo <mike@flyn.org>
Link: https://github.com/openwrt/packages/issues/13081
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Fix shellcheck SC2230
> which is non-standard. Use builtin 'command -v' instead.
Once applied to everything concerning OpenWrt we can disable the busybox
feature `which` and save 3.8kB.
Signed-off-by: Paul Spooren <mail@aparcar.org>
If ttyd is configured to ssl, you will get the following message in the
log `refuse to serve WS client for illegal ws path`. Upstream a patch
has already been applied which fixes this.
Since there is no newer version than 1.6.1, this fix is backported as a
patch. And could be removed if a new version of ttyd is available.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
GCC10 defaults to -fno-common , which breaks compilation as there are
multiple variables defined outside of the header file.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Append missing debug option value.
If this is not append and the debug option is selected, then we get the
following error output on ttyd start.
> ttyd: missing start command
To fix this add missing debug option value.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Added the mount utilities. It turns out that udev is not a requirement.
Renamed package to fuse3 and moved to utils, as with fuse2.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Yanase Yuki