OpenWrt/xiaomi-ax3600
1
0
Fork 0
mirror of https://github.com/immortalwrt/immortalwrt.git synced 2025-11-02 16:21:21 +08:00
Code Issues Packages Projects Releases Wiki Activity
Files
24395c3ec30d6d4e411807dc61c6e00af8a56bca
xiaomi-ax3600/target/linux/rockchip/image/armv8.mk

447 lines
12 KiB
Makefile
Raw Normal View History

target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 14:52:34 +01:00
# SPDX-License-Identifier: GPL-2.0-only
rockchip: add support for Pine64 RockPro64 This adds the new rockchip target and support for RockPro64 RK3399 Flash: 16 MiB SPI NOR RAM: 2 GiB/4 GiB LPDDR4 SoC: RK3399 USB: 2x USB 2.0, 1x USB 3.0, 1x USB-C Ethernet: 1x GbE PCIe: PCIe 2.0, 4 lanes Storage: eMMC or SD card Optional SDIO wifi/bt module The Pine64 RockPro64 is a single-board-computer with a 4x PCIe connector, 6 ARM64 cores (4 little, 2 big), plenty of RAM and storage. By default the single Gigabit-Ethernet port is configured as the LAN port. Installation of the firware is possible by dd'ing the image to an SD card or the eMMC flash. Serial: 3v3 1500000 8n1 U-boot is build from the mainline tree and integrated into the images. Required ATF to build u-boot is downloaded from a CI build bot. Signed-off-by: Tobias Mädel <t.maedel@alfeld.de> Tested-by: Tobias Schramm <t.schramm@manjaro.org>
2020-04-12 13:57:25 +02:00
#
treewide: update contact information Change contact information of comitter as requested. Reviewed-by: Sarah Mädel <openwrt@tbspace.de> Signed-off-by: David Bauer <mail@david-bauer.net>
2024-08-29 00:46:30 +02:00
# Copyright (C) 2020 Sarah Maedel
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 10:08:57 +02:00
rockchip: use LZMA FIT for kernel image Use LZMA compressed kernel to save some space in boot partition. Fixes: #11197 Tested-by: Tianling Shen <cnsztl@immortalwrt.org> [NanoPi R2S] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2022-11-13 21:29:26 +08:00
# FIT will be loaded at 0x02080000. Leave 16M for that, align it to 2M and load the kernel after it.
KERNEL_LOADADDR := 0x03200000
rockchip: re-order eth ports for fastrhino r68s eth0 <-> eth1 eth2 <-> eth3 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-08-20 17:31:25 +08:00
define Device/IfnameMigration
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Network interface names have been changed
endef
rockchip: add Ariaboard Photonicat support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4 RAM 2x 1000 Base-T QCA1023 Wi-Fi 5 / Bluetooth 16GB or 64GB eMMC on-board 2x M.2 Slot (B+E Key) Micro-SD Slot HDMI Port USB 3.0 Port 7000 mAh Battery Type-C Power Note ---- The sdio card QCA1023 is not supported for now due to broken ath10k-sdio driver. Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-27 18:33:27 +08:00
define Device/ariaboard_photonicat
DEVICE_VENDOR := Ariaboard
DEVICE_MODEL := Photonicat
SOC := rk3568
BOOT_FLOW := pine64-img
pcat-manager: mark as broken Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-06-26 20:17:44 +08:00
DEVICE_PACKAGES := kmod-ath10k-sdio ath10k-firmware-qca9377-sdio wpad-openssl \
rockchip: enable wireless support for photonicat Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-28 00:20:10 +08:00
kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
rockchip: add Ariaboard Photonicat support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4 RAM 2x 1000 Base-T QCA1023 Wi-Fi 5 / Bluetooth 16GB or 64GB eMMC on-board 2x M.2 Slot (B+E Key) Micro-SD Slot HDMI Port USB 3.0 Port 7000 mAh Battery Type-C Power Note ---- The sdio card QCA1023 is not supported for now due to broken ath10k-sdio driver. Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-27 18:33:27 +08:00
endef
TARGET_DEVICES += ariaboard_photonicat
rockchip: add ArmSom Sige3 support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2/4/8GB LPDDR4x RAM 1000 Base-T 2500 Base-T AP6275S Wi-Fi 6 / Bluetooth 5.3 2 LEDs (RED / GREEN) 8/16/32/64GB eMMC on-board Micro-SD Slot HDMI Port USB 2.0 Port USB 3.0 Port USB Type-C 3.0 Port M.2 M-Key 40-Pin Header USB PD 2.0 9/12/15V Power Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-08-30 11:15:54 +08:00
define Device/armsom_sige3
DEVICE_VENDOR := ArmSoM
DEVICE_MODEL := Sige3
SOC := rk3568
DEVICE_DTS := rockchip/rk3568-armsom-sige3
BOOT_FLOW := pine64-img
DEVICE_PACKAGES := kmod-brcmfmac kmod-r8125 wpad-openssl \
brcmfmac-firmware-43752-sdio brcmfmac-nvram-43752-sdio
endef
TARGET_DEVICES += armsom_sige3
rockchip: add ArmSoM Sige7 support This board is also as known as Bananapi BPi-M7. Hardware -------- RockChip RK3588 ARM64 (8 cores) 8/16/32GB LPDDR4/LPDDR4x RAM 2x 2500 Base-T (PCIe, rtl8125b) AP6275P Wi-Fi 6 / Bluetooth 5 2 LEDs (RED / GREEN) 16GB/32GB/64GB/128GB eMMC on-board Micro-SD Slot HDMI Port USB 2.0 Port USB 3.0 Port USB Type-C 3.0 Port M.2 M-Key 40-Pin Header USB PD 2.0 9/12/15V Power Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-07-11 22:18:12 +08:00
define Device/armsom_sige7
DEVICE_VENDOR := ArmSoM
DEVICE_MODEL := Sige7
DEVICE_ALT0_VENDOR := Bananapi
DEVICE_ALT0_MODEL := BPi-M7
SOC := rk3588
DEVICE_DTS := rockchip/rk3588-armsom-sige7
BOOT_FLOW := pine64-img
DEVICE_PACKAGES := kmod-brcmfmac kmod-r8125 wpad-openssl \
brcmfmac-firmware-43752-pcie brcmfmac-nvram-43752-pcie
endef
TARGET_DEVICES += armsom_sige7
rockchip: add Cyber 3588 AIB support Hardware -------- RockChip RK3588 ARM64 (8 cores) 8GB LPDDR4 RAM 2x 2500 Base-T (PCIe, rtl8125b) 1x LED 128GB eMMC on-board Micro-SD Slot HDMI IN/OUT USB 3.0 Port USB Type-C 3.0 Port M.2 B-Key M.2 E-Key M.2 M-Key DC Jack 12V Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-09-24 00:23:04 +08:00
define Device/cyber_cyber3588-aib
DEVICE_VENDOR := Cyber
DEVICE_MODEL := 3588 AIB
SOC := rk3588
BOOT_FLOW := pine64-img
DEVICE_PACKAGES := kmod-ata-ahci-dwc kmod-r8125 kmod-mt7921e wpad-openssl \
kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
endef
TARGET_DEVICES += cyber_cyber3588-aib
rockchip: add Mrkaio M68S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 4GB LPDDR4 RAM 2x 1000 Base-T 2 LEDs (SATA / POWER) 32GB eMMC on-board Micro-SD Slot SATA slot 2x USB 3.0 Port HDMI 2.0, MIPI DSI/CSI USB Type C PD [updated commit title/description, fixed dts syntax, set irq for it] Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-28 10:10:47 +08:00
define Device/ezpro_mrkaio-m68s
DEVICE_VENDOR := EZPRO
DEVICE_MODEL := Mrkaio M68S
SOC := rk3568
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-img
rockchip: fix sata packages Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-09-23 20:09:21 +08:00
DEVICE_PACKAGES := kmod-ata-ahci-dwc
rockchip: add Mrkaio M68S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 4GB LPDDR4 RAM 2x 1000 Base-T 2 LEDs (SATA / POWER) 32GB eMMC on-board Micro-SD Slot SATA slot 2x USB 3.0 Port HDMI 2.0, MIPI DSI/CSI USB Type C PD [updated commit title/description, fixed dts syntax, set irq for it] Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-28 10:10:47 +08:00
endef
TARGET_DEVICES += ezpro_mrkaio-m68s
rockchip: fix supported device for firefly roc-rk3328-cc Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 20:05:08 +08:00
define Device/firefly_roc-rk3328-cc
rockchip: add Firefly ROC-RK3328-CC support Hardware -------- RockChip RK3328 ARM64 (4 cores) 4GB DDR4 RAM 1x 1000 Base-T 2 LEDs (POWER / USER) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot eMMC slot 1x USB 3.0 Port 2x USB 2.0 Port Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 01:51:27 +08:00
DEVICE_VENDOR := Firefly
DEVICE_MODEL := ROC-RK3328-CC
SOC := rk3328
rockchip: fix supported device for firefly roc-rk3328-cc Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 20:05:08 +08:00
DEVICE_DTS := rockchip/rk3328-roc-cc
rockchip: add Firefly ROC-RK3328-CC support Hardware -------- RockChip RK3328 ARM64 (4 cores) 4GB DDR4 RAM 1x 1000 Base-T 2 LEDs (POWER / USER) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot eMMC slot 1x USB 3.0 Port 2x USB 2.0 Port Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 01:51:27 +08:00
UBOOT_DEVICE_NAME := roc-cc-rk3328
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: add Firefly ROC-RK3328-CC support Hardware -------- RockChip RK3328 ARM64 (4 cores) 4GB DDR4 RAM 1x 1000 Base-T 2 LEDs (POWER / USER) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot eMMC slot 1x USB 3.0 Port 2x USB 2.0 Port Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 01:51:27 +08:00
endef
rockchip: fix supported device for firefly roc-rk3328-cc Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 20:05:08 +08:00
TARGET_DEVICES += firefly_roc-rk3328-cc
rockchip: add Firefly ROC-RK3328-CC support Hardware -------- RockChip RK3328 ARM64 (4 cores) 4GB DDR4 RAM 1x 1000 Base-T 2 LEDs (POWER / USER) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot eMMC slot 1x USB 3.0 Port 2x USB 2.0 Port Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 01:51:27 +08:00
rockchip: add Station P2 support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2/4/8GB LPDDR4 RAM 2x 1000 Base-T Bluetooth 5.0 Dual-band Wi-Fi6 2 LEDs (POWER / USER) 32/64/128GB eMMC on-board Micro-SD Slot M.2 Slot SATA 3.0 interfaces HDMI 2.0 Headphone 2x USB 2.0 Port USB 3.0 Port DC 12V Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-07-12 21:24:31 +08:00
define Device/firefly_roc-rk3568-pc
DEVICE_VENDOR := Firefly
DEVICE_MODEL := Station P2
DEVICE_ALT0_VENDOR := Firefly
DEVICE_ALT0_MODEL := ROC-RK3568-PC
SOC := rk3568
DEVICE_DTS := rockchip/rk3568-roc-pc
SUPPORTED_DEVICES := firefly,rk3568-roc-pc
UBOOT_DEVICE_NAME := roc-pc-rk3568
BOOT_FLOW := pine64-img
rockchip: fix sata packages Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-09-23 20:09:21 +08:00
DEVICE_PACKAGES := kmod-ata-ahci-dwc kmod-brcmfmac wpad-openssl \
rockchip: add Station P2 support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2/4/8GB LPDDR4 RAM 2x 1000 Base-T Bluetooth 5.0 Dual-band Wi-Fi6 2 LEDs (POWER / USER) 32/64/128GB eMMC on-board Micro-SD Slot M.2 Slot SATA 3.0 interfaces HDMI 2.0 Headphone 2x USB 2.0 Port USB 3.0 Port DC 12V Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-07-12 21:24:31 +08:00
brcmfmac-firmware-43752-sdio brcmfmac-nvram-43752-sdio
endef
TARGET_DEVICES += firefly_roc-rk3568-pc
rockchip: add FriendlyARM NanoPC T4 support Hardware -------- RockChip RK3399 ARM64 (6 cores) 4GB LPDDR3 RAM 1x 1000 Base-T 1 GPIO LED (status) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot 16GB eMMC 1x USB 3.0 Port 2x USB 2.0 Port 1x USB Type-C Port 1x M.2 PCI-E Port AP6356S (BCM4356) SDIO WiFi & Bluetooth adapter -------- Note: AP6356S is not supported yet due to the lack of firmware and NVRAM Signed-off-by: Lu jicong <jiconglu58@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-07-16 19:41:09 +08:00
define Device/friendlyarm_nanopc-t4
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPC T4
SOC := rk3399
BOOT_FLOW := pine64-bin
rockchip: switch to full version wpad Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-03-02 19:36:16 +08:00
DEVICE_PACKAGES := kmod-brcmfmac wpad-openssl \
rockchip: add wireless firmware to nanopi t4 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-07-23 19:33:07 +08:00
brcmfmac-firmware-4356-sdio brcmfmac-nvram-4356-sdio
rockchip: add FriendlyARM NanoPC T4 support Hardware -------- RockChip RK3399 ARM64 (6 cores) 4GB LPDDR3 RAM 1x 1000 Base-T 1 GPIO LED (status) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot 16GB eMMC 1x USB 3.0 Port 2x USB 2.0 Port 1x USB Type-C Port 1x M.2 PCI-E Port AP6356S (BCM4356) SDIO WiFi & Bluetooth adapter -------- Note: AP6356S is not supported yet due to the lack of firmware and NVRAM Signed-off-by: Lu jicong <jiconglu58@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-07-16 19:41:09 +08:00
endef
TARGET_DEVICES += friendlyarm_nanopc-t4
rockchip: add NanoPC T6 support Hardware -------- RockChip RK3588 ARM64 (8 cores) 4/8/16GB LPDDR4X RAM 2x 2500 Base-T (PCIe, rtl8125b) 2 LEDs (POWER / WAN) 32/64/256GB eMMC on-board Micro-SD Slot USB 2.0 Port Headphone USB 3.0 USB PD 2.0 M.2 M-Key M.2 E-Key DC Jack 12V Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-08-07 01:20:15 +08:00
define Device/friendlyarm_nanopc-t6
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPC T6
SOC := rk3588
BOOT_FLOW := pine64-img
DEVICE_PACKAGES := kmod-r8125
endef
TARGET_DEVICES += friendlyarm_nanopc-t6
rockchip: add NanoPi R2C support This board is a fork of NanoPi R2S, with the native NIC changed. Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit d9cb05957d6454f85285715162781e27f22b329e)
2021-08-13 03:02:59 +08:00
define Device/friendlyarm_nanopi-r2c
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R2C
SOC := rk3328
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: add NanoPi R2C support This board is a fork of NanoPi R2S, with the native NIC changed. Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit d9cb05957d6454f85285715162781e27f22b329e)
2021-08-13 03:02:59 +08:00
DEVICE_PACKAGES := kmod-usb-net-rtl8152
endef
TARGET_DEVICES += friendlyarm_nanopi-r2c
rockchip: add NanoPi R2C Plus The FriendlyARM NanoPi R2C Plus is a minor variant of R2C with a on-board 8G eMMC flash. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:29:01 +08:00
define Device/friendlyarm_nanopi-r2c-plus
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R2C Plus
SOC := rk3328
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: add NanoPi R2C Plus The FriendlyARM NanoPi R2C Plus is a minor variant of R2C with a on-board 8G eMMC flash. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:29:01 +08:00
DEVICE_PACKAGES := kmod-usb-net-rtl8152
endef
TARGET_DEVICES += friendlyarm_nanopi-r2c-plus
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 10:08:57 +02:00
define Device/friendlyarm_nanopi-r2s
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_VENDOR := FriendlyARM
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 10:08:57 +02:00
DEVICE_MODEL := NanoPi R2S
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
SOC := rk3328
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_PACKAGES := kmod-usb-net-rtl8152
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 10:08:57 +02:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r2s
rockchip: Add support for RK3566 FriendlyElec NanoPi R3S This commit adds support for the FriendlyElec NanoPi R3S. CPU: Rockchip RK3566, Quad-core Cortex-A55 RAM: 2GB LPDDR4X Ethernet: GMAC RTL8211F GbE, PCIe R8111H GbE USB3.0 Host: Type-A x1 Storage: MicroSD Slot x 1, and optional on-board 32GB eMMC Debug Serial Port: 3.3V TTL, 3-pin 2.54mm pitch connector, 1500000 bauds LED: LED x 3 RTC: One low-power RTC, supports backup battery input Both GbE controllers are working (WAN eth0, LAN eth1). Appropriate LAN/WAN interface assignments and MAC address generation. All three LEDs are working. USB appears to be working and has been tested with mass storage. Installation - microSD: -Uncompress the OpenWRT sysupgrade.img.gz -Write image to microSD card using dd or similar tool Installation - eMMC: -Boot from microSD -Uncompress the OpenWRT sysupgrade.img.gz -Flash to eMMC : dd if=x.img of=/dev/mmcblk0 -sync -Remove microSD card -Reboot Signed-off-by: Kevin Zhang <kevin@kevinzhang.me> Link: https://github.com/openwrt/openwrt/pull/16738 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-27 01:13:05 -04:00
define Device/friendlyarm_nanopi-r3s
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R3S
SOC := rk3566
Merge Official Source Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-10-31 16:19:48 +08:00
BOOT_FLOW := pine64-img
rockchip: change to use upstream driver for rtl8111 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit d36e763056ad5deb79bf68b3d81162ef8e4d2a68)
2025-04-15 13:34:10 +08:00
DEVICE_PACKAGES := kmod-r8169
rockchip: Add support for RK3566 FriendlyElec NanoPi R3S This commit adds support for the FriendlyElec NanoPi R3S. CPU: Rockchip RK3566, Quad-core Cortex-A55 RAM: 2GB LPDDR4X Ethernet: GMAC RTL8211F GbE, PCIe R8111H GbE USB3.0 Host: Type-A x1 Storage: MicroSD Slot x 1, and optional on-board 32GB eMMC Debug Serial Port: 3.3V TTL, 3-pin 2.54mm pitch connector, 1500000 bauds LED: LED x 3 RTC: One low-power RTC, supports backup battery input Both GbE controllers are working (WAN eth0, LAN eth1). Appropriate LAN/WAN interface assignments and MAC address generation. All three LEDs are working. USB appears to be working and has been tested with mass storage. Installation - microSD: -Uncompress the OpenWRT sysupgrade.img.gz -Write image to microSD card using dd or similar tool Installation - eMMC: -Boot from microSD -Uncompress the OpenWRT sysupgrade.img.gz -Flash to eMMC : dd if=x.img of=/dev/mmcblk0 -sync -Remove microSD card -Reboot Signed-off-by: Kevin Zhang <kevin@kevinzhang.me> Link: https://github.com/openwrt/openwrt/pull/16738 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-27 01:13:05 -04:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r3s
rockchip: add NanoPi R4S support Hardware -------- RockChip RK3399 ARM64 (6 cores) 1GB DDR3 or 4GB LPDDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@gmail.com> Co-authored-by: Jensen Huang <jensenhuang@friendlyarm.com> Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com> Co-authored-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-12-25 20:03:14 +08:00
define Device/friendlyarm_nanopi-r4s
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R4S
SOC := rk3399
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: switch to r8169 driver for nanopi r4s series Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit 3c5ff02eae988616ee59e1236764c63e34a3525b)
2025-03-01 20:48:52 +08:00
DEVICE_PACKAGES := kmod-r8169
rockchip: add NanoPi R4S support Hardware -------- RockChip RK3399 ARM64 (6 cores) 1GB DDR3 or 4GB LPDDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@gmail.com> Co-authored-by: Jensen Huang <jensenhuang@friendlyarm.com> Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com> Co-authored-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-12-25 20:03:14 +08:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r4s
rockchip: add NanoPi R4SE The FriendlyARM NanoPi R4SE is a minor variant of R4S with a on-board eMMC. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-30 14:55:59 +08:00
define Device/friendlyarm_nanopi-r4se
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R4SE
SOC := rk3399
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: switch to r8169 driver for nanopi r4s series Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit 3c5ff02eae988616ee59e1236764c63e34a3525b)
2025-03-01 20:48:52 +08:00
DEVICE_PACKAGES := kmod-r8169
rockchip: add NanoPi R4SE The FriendlyARM NanoPi R4SE is a minor variant of R4S with a on-board eMMC. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-30 14:55:59 +08:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r4se
rockchip: add NanoPi R4S Enterprise Edition The only diffrence against the standrard edition is that the enterprise one has a built-in EEPROM chip which stores a globally unique MAC address. This patch removed the MAC address hack. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-09-16 20:18:34 +08:00
define Device/friendlyarm_nanopi-r4s-enterprise
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_VENDOR := FriendlyARM
rockchip: add NanoPi R4S Enterprise Edition The only diffrence against the standrard edition is that the enterprise one has a built-in EEPROM chip which stores a globally unique MAC address. This patch removed the MAC address hack. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-09-16 20:18:34 +08:00
DEVICE_MODEL := NanoPi R4S Enterprise Edition
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
SOC := rk3399
uboot-rockchip: remove redudant NanoPi R4S Enterprise Edition build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-01-10 19:33:38 +08:00
UBOOT_DEVICE_NAME := nanopi-r4s-rk3399
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: switch to r8169 driver for nanopi r4s series Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit 3c5ff02eae988616ee59e1236764c63e34a3525b)
2025-03-01 20:48:52 +08:00
DEVICE_PACKAGES := kmod-r8169
rockchip: add NanoPi R4S Enterprise Edition The only diffrence against the standrard edition is that the enterprise one has a built-in EEPROM chip which stores a globally unique MAC address. This patch removed the MAC address hack. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-09-16 20:18:34 +08:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r4s-enterprise
rockchip: add NanoPi R5C support Hardware -------- RockChip RK3568 ARM64 (4 cores) 1GB or 4GB LPDDR4X RAM 2x 2500 Base-T 4 LEDs (LAN / WAN / WIFI / POWER) 1 Button (Reset) 8GB or 32GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-15 16:31:04 +08:00
define Device/friendlyarm_nanopi-r5c
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R5C
SOC := rk3568
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-img
rockchip: switch to full version wpad Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-03-02 19:36:16 +08:00
DEVICE_PACKAGES := kmod-r8125 kmod-rtw88-8822ce rtl8822ce-firmware wpad-openssl
rockchip: add NanoPi R5C support Hardware -------- RockChip RK3568 ARM64 (4 cores) 1GB or 4GB LPDDR4X RAM 2x 2500 Base-T 4 LEDs (LAN / WAN / WIFI / POWER) 1 Button (Reset) 8GB or 32GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-15 16:31:04 +08:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r5c
rockchip: add NanoPi R5S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4X RAM 1x 1000 Base-T 2x 2500 Base-T 4 LEDs (LAN1 / LAN2 / WAN / POWER) 8GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-17 11:16:36 +08:00
define Device/friendlyarm_nanopi-r5s
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_VENDOR := FriendlyARM
rockchip: add NanoPi R5S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4X RAM 1x 1000 Base-T 2x 2500 Base-T 4 LEDs (LAN1 / LAN2 / WAN / POWER) 8GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-17 11:16:36 +08:00
DEVICE_MODEL := NanoPi R5S
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
SOC := rk3568
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-img
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_PACKAGES := kmod-r8125
rockchip: add NanoPi R5S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4X RAM 1x 1000 Base-T 2x 2500 Base-T 4 LEDs (LAN1 / LAN2 / WAN / POWER) 8GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-17 11:16:36 +08:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r5s
rockchip: add NanoPi R6C support Hardware -------- RockChip RK3588S ARM64 (8 cores) 4/8GB LPDDR4X RAM 1000 Base-T (native, rtl8211f) 2500 Base-T (PCIe, rtl8125b) 4 LEDs (SYS / WAN / LAN / USER) 2 Button (GPIO Reset, MaskROM) 32GB eMMC on-board Micro-SD Slot USB 3.0 Port USB 2.0 Port HDMI 2.1 USB Type C PD 5/9/12/20V Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-07-15 17:31:44 +08:00
define Device/friendlyarm_nanopi-r6c
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R6C
SOC := rk3588s
BOOT_FLOW := pine64-img
DEVICE_PACKAGES := kmod-r8125
endef
TARGET_DEVICES += friendlyarm_nanopi-r6c
rockchip: add NanoPi R6S support Hardware -------- RockChip RK3588S ARM64 (8 cores) 8GB LPDDR4X RAM 1x 1000 Base-T (native, rtl8211f) 2x 2500 Base-T (PCIe, rtl8125b) 4 LEDs (SYS / WAN / LAN1 / LAN2) 2 Button (GPIO Reset, MaskROM) 32GB eMMC on-board Micro-SD Slot USB 3.0 Port USB 2.0 Port 2x HDMI 2.1 IR receiver USB Type C PD 5/9/12/20V Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-29 15:34:35 +08:00
define Device/friendlyarm_nanopi-r6s
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R6S
SOC := rk3588s
BOOT_FLOW := pine64-img
DEVICE_PACKAGES := kmod-r8125
endef
TARGET_DEVICES += friendlyarm_nanopi-r6s
rockchip: add GuangMiao G4C support This board was designed as a clone of NanoPi R4S. However, it didn't follow the spec and changed the power-supply system massively, and because of it there's no way to soft reset this board currently. For reboot, you must cut off the power and reengage it. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-29 16:18:08 +08:00
define Device/huake_guangmiao-g4c
DEVICE_VENDOR := Huake-Cloud
DEVICE_MODEL := GuangMiao G4C
SOC := rk3399
BOOT_FLOW := pine64-bin
rockchip: change to use upstream driver for rtl8111 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit d36e763056ad5deb79bf68b3d81162ef8e4d2a68)
2025-04-15 13:34:10 +08:00
DEVICE_PACKAGES := kmod-r8169
rockchip: add GuangMiao G4C support This board was designed as a clone of NanoPi R4S. However, it didn't follow the spec and changed the power-supply system massively, and because of it there's no way to soft reset this board currently. For reboot, you must cut off the power and reengage it. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-29 16:18:08 +08:00
endef
TARGET_DEVICES += huake_guangmiao-g4c
rockchip: add Fastrhino R68S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4 RAM 2x 1000 Base-T 2x 2500 Base-T 2 LEDs (Power / Status) 2 Buttons (Reset / Recovery) 16 GB eMMC on-board 2x USB 3.0 Port Installation ------------ See https://github.com/1715173329/blog/issues/4 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-11-01 17:08:20 +08:00
define Device/lunzn_fastrhino-r66s
DEVICE_VENDOR := Lunzn
DEVICE_MODEL := FastRhino R66S
SOC := rk3568
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-img
rockchip: add Fastrhino R68S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4 RAM 2x 1000 Base-T 2x 2500 Base-T 2 LEDs (Power / Status) 2 Buttons (Reset / Recovery) 16 GB eMMC on-board 2x USB 3.0 Port Installation ------------ See https://github.com/1715173329/blog/issues/4 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-11-01 17:08:20 +08:00
DEVICE_PACKAGES := kmod-r8125
endef
TARGET_DEVICES += lunzn_fastrhino-r66s
define Device/lunzn_fastrhino-r68s
rockchip: re-order eth ports for fastrhino r68s eth0 <-> eth1 eth2 <-> eth3 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-08-20 17:31:25 +08:00
$(Device/IfnameMigration)
rockchip: add Fastrhino R68S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4 RAM 2x 1000 Base-T 2x 2500 Base-T 2 LEDs (Power / Status) 2 Buttons (Reset / Recovery) 16 GB eMMC on-board 2x USB 3.0 Port Installation ------------ See https://github.com/1715173329/blog/issues/4 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-11-01 17:08:20 +08:00
DEVICE_VENDOR := Lunzn
DEVICE_MODEL := FastRhino R68S
SOC := rk3568
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-img
rockchip: add Fastrhino R68S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4 RAM 2x 1000 Base-T 2x 2500 Base-T 2 LEDs (Power / Status) 2 Buttons (Reset / Recovery) 16 GB eMMC on-board 2x USB 3.0 Port Installation ------------ See https://github.com/1715173329/blog/issues/4 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-11-01 17:08:20 +08:00
DEVICE_PACKAGES := kmod-r8125
endef
TARGET_DEVICES += lunzn_fastrhino-r68s
rockchip: add LYT T68M support Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-09-21 17:36:46 +08:00
define Device/lyt_t68m
DEVICE_VENDOR := LYT
DEVICE_MODEL := T68M
SOC := rk3568
DEVICE_DTS := rockchip/rk3568-lyt-t68m
UBOOT_DEVICE_NAME := lyt-t68m-rk3568
BOOT_FLOW := pine64-img
Merge Official Source Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-09-21 20:23:43 +08:00
DEVICE_PACKAGES := kmod-r8125 kmod-mt7921e wpad-openssl
rockchip: add LYT T68M support Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-09-21 17:36:46 +08:00
endef
TARGET_DEVICES += lyt_t68m
rockchip: add MMBOX ANAS3035 support Hardware -------- RockChip RK3568 ARM64 (4 cores) 4GB LPDDR4X RAM 2x 2500 Base-T (PCIe, rtl8125b) 4x LEDs (POWER / SATA1 / SATA2 / SATA3) 32GB eMMC on-board Micro-SD Slot HDMI OUT 2x USB 2.0 Port 3x SATA Slot DC Jack 12V Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <i@cnsztl.eu.org> (cherry picked from commit 934bf398beed4c9c974cd24fa6a535b9721380b5)
2024-10-24 16:28:35 +08:00
define Device/mmbox_anas3035
DEVICE_VENDOR := MMBOX
DEVICE_MODEL := ANAS3035
SOC := rk3568
DEVICE_DTS := rockchip/rk3568-mmbox-anas3035
UBOOT_DEVICE_NAME := mmbox-anas3035-rk3568
BOOT_FLOW := pine64-img
DEVICE_PACKAGES := kmod-r8125 kmod-ata-ahci-dwc kmod-hwmon-pwmfan kmod-hwmon-drivetemp
endef
TARGET_DEVICES += mmbox_anas3035
rockchip: add support for PINE64 ROCK64 This add support for PINE64 ROCK64, rockchip rk3328 board. Specifications: 4 x ARM Cortex A53 cores @ 1.5 GHz ARM Mali 450 MP2 GPU LPDDR3 RAM (up to 4GB) Gigabit Ethernet Micro SD Slot eMMC module slot SPI Flash 128Mbit 4K digital video out 2x USB 2.0 Host 1x USB 3.0 Host PI-2 bus PI-P5+ bus IR R/X port Real Time Clock (RTC) port Power Over Ethernet (POE) (when using optional HAT module) A/V jack Power, Reset and Recovery buttons 3.5mm barrel power (5V 3A) port To install write image to the sd using dd (dd if=*.img of=/*) Signed-off-by: Antonio Flores <antflores627@gmail.com>
2023-07-08 13:31:49 -04:00
define Device/pine64_rock64
DEVICE_VENDOR := Pine64
DEVICE_MODEL := Rock64
SOC := rk3328
Merge Official Source Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-08-29 09:23:24 +08:00
BOOT_FLOW := pine64-bin
rockchip: add support for PINE64 ROCK64 This add support for PINE64 ROCK64, rockchip rk3328 board. Specifications: 4 x ARM Cortex A53 cores @ 1.5 GHz ARM Mali 450 MP2 GPU LPDDR3 RAM (up to 4GB) Gigabit Ethernet Micro SD Slot eMMC module slot SPI Flash 128Mbit 4K digital video out 2x USB 2.0 Host 1x USB 3.0 Host PI-2 bus PI-P5+ bus IR R/X port Real Time Clock (RTC) port Power Over Ethernet (POE) (when using optional HAT module) A/V jack Power, Reset and Recovery buttons 3.5mm barrel power (5V 3A) port To install write image to the sd using dd (dd if=*.img of=/*) Signed-off-by: Antonio Flores <antflores627@gmail.com>
2023-07-08 13:31:49 -04:00
endef
TARGET_DEVICES += pine64_rock64
rockchip: add support for Pine64 RockPro64 This adds the new rockchip target and support for RockPro64 RK3399 Flash: 16 MiB SPI NOR RAM: 2 GiB/4 GiB LPDDR4 SoC: RK3399 USB: 2x USB 2.0, 1x USB 3.0, 1x USB-C Ethernet: 1x GbE PCIe: PCIe 2.0, 4 lanes Storage: eMMC or SD card Optional SDIO wifi/bt module The Pine64 RockPro64 is a single-board-computer with a 4x PCIe connector, 6 ARM64 cores (4 little, 2 big), plenty of RAM and storage. By default the single Gigabit-Ethernet port is configured as the LAN port. Installation of the firware is possible by dd'ing the image to an SD card or the eMMC flash. Serial: 3v3 1500000 8n1 U-boot is build from the mainline tree and integrated into the images. Required ATF to build u-boot is downloaded from a CI build bot. Signed-off-by: Tobias Mädel <t.maedel@alfeld.de> Tested-by: Tobias Schramm <t.schramm@manjaro.org>
2020-04-12 13:57:25 +02:00
define Device/pine64_rockpro64
DEVICE_VENDOR := Pine64
DEVICE_MODEL := RockPro64
SOC := rk3399
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: add support for Pine64 RockPro64 This adds the new rockchip target and support for RockPro64 RK3399 Flash: 16 MiB SPI NOR RAM: 2 GiB/4 GiB LPDDR4 SoC: RK3399 USB: 2x USB 2.0, 1x USB 3.0, 1x USB-C Ethernet: 1x GbE PCIe: PCIe 2.0, 4 lanes Storage: eMMC or SD card Optional SDIO wifi/bt module The Pine64 RockPro64 is a single-board-computer with a 4x PCIe connector, 6 ARM64 cores (4 little, 2 big), plenty of RAM and storage. By default the single Gigabit-Ethernet port is configured as the LAN port. Installation of the firware is possible by dd'ing the image to an SD card or the eMMC flash. Serial: 3v3 1500000 8n1 U-boot is build from the mainline tree and integrated into the images. Required ATF to build u-boot is downloaded from a CI build bot. Signed-off-by: Tobias Mädel <t.maedel@alfeld.de> Tested-by: Tobias Schramm <t.schramm@manjaro.org>
2020-04-12 13:57:25 +02:00
endef
TARGET_DEVICES += pine64_rockpro64
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-25 14:00:40 -04:00
rockchip: add Radxa CM3 IO board support Hardware -------- RockChip RK3566 ARM64 (4 cores) - up to 8GB LPDDR4X - 1x HDMI, - 2x MIPI DSI - 2x MIPI CSI2 - 1x eDP - 1x PCIe card - 2x SATA - 2x USB 2.0 Host - 1x USB 3.0 - 1x USB 2.0 OTG - 10/100/1000 Base-T - microSD slot - 40-pin GPIO expansion header - 12V DC Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Reviewed-by: Tianling Shen <cnsztl@immortalwrt.org> Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
2024-02-20 14:34:43 +00:00
define Device/radxa_cm3-io
DEVICE_VENDOR := Radxa
DEVICE_MODEL := CM3 IO
SOC := rk3566
DEVICE_DTS := rockchip/rk3566-radxa-cm3-io
UBOOT_DEVICE_NAME := radxa-cm3-io-rk3566
Merge Official Source Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-23 23:27:17 +08:00
BOOT_FLOW := pine64-img
rockchip: add Radxa CM3 IO board support Hardware -------- RockChip RK3566 ARM64 (4 cores) - up to 8GB LPDDR4X - 1x HDMI, - 2x MIPI DSI - 2x MIPI CSI2 - 1x eDP - 1x PCIe card - 2x SATA - 2x USB 2.0 Host - 1x USB 3.0 - 1x USB 2.0 OTG - 10/100/1000 Base-T - microSD slot - 40-pin GPIO expansion header - 12V DC Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Reviewed-by: Tianling Shen <cnsztl@immortalwrt.org> Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
2024-02-20 14:34:43 +00:00
endef
TARGET_DEVICES += radxa_cm3-io
rockchip: add Radxa E25 support Hardware -------- RockChip RK3568 ARM64 (4 cores) RGB LED 1/2/4/8GB LPDDR4 RAM 2x 2500 Base-T 2/16/32/64/128GB eMMC on-board M.2 Slot miniPCIe Slot Micro-SD Slot USB 3.0 Port Type-C PD Power Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-27 21:59:16 +08:00
define Device/radxa_e25
DEVICE_VENDOR := Radxa
DEVICE_MODEL := E25
SOC := rk3568
DEVICE_DTS := rockchip/rk3568-radxa-e25
rockchip: fix uboot device name for radxa e25 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-28 15:30:59 +08:00
UBOOT_DEVICE_NAME := radxa-e25-rk3568
rockchip: add Radxa E25 support Hardware -------- RockChip RK3568 ARM64 (4 cores) RGB LED 1/2/4/8GB LPDDR4 RAM 2x 2500 Base-T 2/16/32/64/128GB eMMC on-board M.2 Slot miniPCIe Slot Micro-SD Slot USB 3.0 Port Type-C PD Power Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-27 21:59:16 +08:00
BOOT_FLOW := pine64-img
Merge Official Source Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-07-10 19:12:35 +08:00
BOOT_SCRIPT := radxa-e25
Merge Official Source Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-07-22 23:01:52 +08:00
DEVICE_PACKAGES := kmod-r8125 kmod-ata-ahci-dwc
rockchip: add Radxa E25 support Hardware -------- RockChip RK3568 ARM64 (4 cores) RGB LED 1/2/4/8GB LPDDR4 RAM 2x 2500 Base-T 2/16/32/64/128GB eMMC on-board M.2 Slot miniPCIe Slot Micro-SD Slot USB 3.0 Port Type-C PD Power Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-27 21:59:16 +08:00
endef
TARGET_DEVICES += radxa_e25
rockchip: add ROCK 3A support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2/4/8GB LPDDR4 RAM 1000 Base-T eMMC on-board M.2 Slot Micro-SD Slot HDMI Port 3.5mm Audio Jack 2x USB 3.0 Port 2x USB 2.0 Port Type-C PD Power Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-27 19:45:59 +08:00
define Device/radxa_rock-3a
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK 3A
SOC := rk3568
SUPPORTED_DEVICES := radxa,rock3a
BOOT_FLOW := pine64-img
rockchip: add support for Radxa ROCK 3A Radxa ROCK 3A is a credit card sized SBC with rich interfaces[1] using the Rockchip RK3328 SoC. Hardware -------- - Rockchip RK3568 SoC - Quad Cortex-A55 CPU - Mail G52 GPU - 1 TOPs NPU - 2/4/8GB LPDDR4 RAM - 1x eMMC connector - 1x M.2 M Key (2-lane PCIe 3.0) supporting NVMe SSD - 1x Micro SD card slot - 1x 1000M Ethernet with PoE support (additional PoE HAT required) - 1x USB 3.0 Type-A port (Host) - 1x USB 3.0 Type-A port (OTG) - 2x USB 2.0 Type-A ports (Host) - 40 pin color GPIO header [1] https://radxa.com/products/rock3/3a Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15985 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-24 14:48:09 +09:00
DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis
rockchip: add ROCK 3A support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2/4/8GB LPDDR4 RAM 1000 Base-T eMMC on-board M.2 Slot Micro-SD Slot HDMI Port 3.5mm Audio Jack 2x USB 3.0 Port 2x USB 2.0 Port Type-C PD Power Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-27 19:45:59 +08:00
endef
TARGET_DEVICES += radxa_rock-3a
rockchip: add support for Radxa ROCK 3B Radxa ROCK 3B is a Pico-ITX form factor SBC[1] using the Rockchip RK3568(J). Hardware -------- - Rockchip RK3568(J) SoC - Quad A55 CPU - Mali-G52 GPU - 1 TOPS @ INT8 NPU - 2GB/4GB/8GB LPDDR4 RAM - eMMC connector - Micro SD Card slot - NVMe SSD through the M.2 M Key (2-lane PCIe 3.0) - SPI Flash for bootloader - 2x Gigabit ethernet port (one supports PoE with add-on PoE HAT) - 1x M.2 E Key socket with SDIO, UART and USB interfaces - 1x M.2 B Key socket with PCIe, SATA, and USB interfaces - 1x SIM card socket - 1x USB 3.0 Type-A HOST port - 1x USB 3.0 Type-A OTG port - 2x USB 2.0 Type-A HOST ports - 40 Pin GPIO header [1] https://radxa.com/products/rock3/3b Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/16185 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-15 06:49:13 +09:00
define Device/radxa_rock-3b
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK 3B
SOC := rk3568
Merge Official Source Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-08-30 11:56:10 +08:00
BOOT_FLOW := pine64-img
rockchip: add support for Radxa ROCK 3B Radxa ROCK 3B is a Pico-ITX form factor SBC[1] using the Rockchip RK3568(J). Hardware -------- - Rockchip RK3568(J) SoC - Quad A55 CPU - Mali-G52 GPU - 1 TOPS @ INT8 NPU - 2GB/4GB/8GB LPDDR4 RAM - eMMC connector - Micro SD Card slot - NVMe SSD through the M.2 M Key (2-lane PCIe 3.0) - SPI Flash for bootloader - 2x Gigabit ethernet port (one supports PoE with add-on PoE HAT) - 1x M.2 E Key socket with SDIO, UART and USB interfaces - 1x M.2 B Key socket with PCIe, SATA, and USB interfaces - 1x SIM card socket - 1x USB 3.0 Type-A HOST port - 1x USB 3.0 Type-A OTG port - 2x USB 2.0 Type-A HOST ports - 40 Pin GPIO header [1] https://radxa.com/products/rock3/3b Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/16185 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-15 06:49:13 +09:00
DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis
endef
TARGET_DEVICES += radxa_rock-3b
rockchip: add support for Radxa ROCK 3C Radxa ROCK 3C is a high-performance, low-cost SBC[1] using the Rockchip RK3566. Hardware -------- - Rockchip RK3566 SoC - Quad A55 CPU - Mali-G52-2EE GPU - 1 TOPS @ INT8 NPU - 1GB/2GB/4GB LPDDR4 RAM - eMMC connector - Micro SD Card slot - NVMe SSD through the M.2 M Key connector(2230) or M.2 Extension board(2232/2260/2280) - SATA through the Radxa Penta SATA HAT - 1x Gigabit ethernet port(supports PoE with add-on PoE HAT) - WiFi6/BT5.4 (not supported yet on OpenWrt) - 1x USB 3.0 Type-A HOST port - 2x USB 2.0 Type-A HOST ports - 1x USB 2.0 Type-A OTG port - 40 Pin GPIO header [1] https://radxa.com/products/rock3/3c Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/16185 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-14 11:26:48 +09:00
define Device/radxa_rock-3c
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK 3C
SOC := rk3566
Merge Official Source Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-08-30 11:56:10 +08:00
BOOT_FLOW := pine64-img
rockchip: add support for Radxa ROCK 3C Radxa ROCK 3C is a high-performance, low-cost SBC[1] using the Rockchip RK3566. Hardware -------- - Rockchip RK3566 SoC - Quad A55 CPU - Mali-G52-2EE GPU - 1 TOPS @ INT8 NPU - 1GB/2GB/4GB LPDDR4 RAM - eMMC connector - Micro SD Card slot - NVMe SSD through the M.2 M Key connector(2230) or M.2 Extension board(2232/2260/2280) - SATA through the Radxa Penta SATA HAT - 1x Gigabit ethernet port(supports PoE with add-on PoE HAT) - WiFi6/BT5.4 (not supported yet on OpenWrt) - 1x USB 3.0 Type-A HOST port - 2x USB 2.0 Type-A HOST ports - 1x USB 2.0 Type-A OTG port - 40 Pin GPIO header [1] https://radxa.com/products/rock3/3c Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/16185 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-14 11:26:48 +09:00
DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis
endef
TARGET_DEVICES += radxa_rock-3c
rockchip: add Rock 5A support Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-08-10 17:42:48 +08:00
define Device/radxa_rock-5a
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK 5A
SOC := rk3588s
UBOOT_DEVICE_NAME := rock5a-rk3588s
BOOT_FLOW := pine64-img
rockchip: add pwmfan driver for radxa rock5a/b Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-11-14 17:39:25 +08:00
DEVICE_PACKAGES := kmod-r8125 kmod-hwmon-pwmfan
rockchip: add Rock 5A support Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-08-10 17:42:48 +08:00
endef
TARGET_DEVICES += radxa_rock-5a
rockchip: add Rock 5B support Hardware -------- RockChip RK3588 ARM64 (8 cores) 4/8/16GB LPDDR4X RAM 2500 Base-T (PCIe, rtl8125b) RGB LED 8/16/32/64/128GB eMMC on-board Micro-SD Slot USB 2.0 Port Headphone USB PD 2.0 12/15/20V Install -------- Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-07-12 19:13:44 +08:00
define Device/radxa_rock-5b
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK 5B
SOC := rk3588
UBOOT_DEVICE_NAME := rock5b-rk3588
BOOT_FLOW := pine64-img
rockchip: add pwmfan driver for radxa rock5a/b Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-11-14 17:39:25 +08:00
DEVICE_PACKAGES := kmod-r8125 kmod-hwmon-pwmfan
rockchip: add Rock 5B support Hardware -------- RockChip RK3588 ARM64 (8 cores) 4/8/16GB LPDDR4X RAM 2500 Base-T (PCIe, rtl8125b) RGB LED 8/16/32/64/128GB eMMC on-board Micro-SD Slot USB 2.0 Port Headphone USB PD 2.0 12/15/20V Install -------- Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-07-12 19:13:44 +08:00
endef
TARGET_DEVICES += radxa_rock-5b
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 17:36:48 +02:00
define Device/radxa_rock-pi-4a
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-25 14:00:40 -04:00
DEVICE_VENDOR := Radxa
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 17:36:48 +02:00
DEVICE_MODEL := ROCK Pi 4A
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-25 14:00:40 -04:00
SOC := rk3399
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 17:36:48 +02:00
SUPPORTED_DEVICES := radxa,rockpi4a radxa,rockpi4
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-25 14:00:40 -04:00
UBOOT_DEVICE_NAME := rock-pi-4-rk3399
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: switch to full version wpad Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-03-02 19:36:16 +08:00
DEVICE_PACKAGES := kmod-brcmfmac wpad-openssl \
rockchip: re-enable wifi for rockpi 4a Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-07-12 21:10:36 +08:00
brcmfmac-firmware-43456-sdio brcmfmac-nvram-43456-sdio
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-25 14:00:40 -04:00
endef
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 17:36:48 +02:00
TARGET_DEVICES += radxa_rock-pi-4a
rockchip: add support for OrangePi R1 Plus Hardware Specification: CPU: RockChip RK3328 (4 cores) RAM: 1GB DDR4 Ethernet: 2x 1000 Base-T Flash: SPI-NOR 16 MB (mx25l12835f) LED: SYS, LAN, WAN MicroSD Slot x 1 Button: Reset USB:1x 2.0 Serial1: 13 Pin pin-header Serial2: 3 Pin debug port Type-C: for power input Power Supply: DC 5V/2A Installation: Write the image to SD Card with dd. Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2021-03-28 21:00:18 +08:00
rockchip: add Rock Pi E support Hardware -------- RockChip RK3328 ARM64 (4 cores) up to 4GB DDR3 RAM 100 Base-T 1000 Base-T LED (status) ADC button Micro-SD slot eMMC slot USB 3.0 Port Type-C power Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-06-17 15:18:36 +08:00
define Device/radxa_rock-pi-e
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK Pi E
rockchip: drop Radxa ROCK Pi E v3.0 build We uses miniloader so memory profile difference can be ignored. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-09-13 17:14:38 +08:00
DEVICE_ALT0_VENDOR := Radxa
DEVICE_ALT0_MODEL := ROCK Pi E v3.0
rockchip: add Rock Pi E support Hardware -------- RockChip RK3328 ARM64 (4 cores) up to 4GB DDR3 RAM 100 Base-T 1000 Base-T LED (status) ADC button Micro-SD slot eMMC slot USB 3.0 Port Type-C power Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-06-17 15:18:36 +08:00
SOC := rk3328
SUPPORTED_DEVICES := radxa,rockpi-e
BOOT_FLOW := pine64-bin
Merge Official Source Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-08-01 14:59:15 +08:00
DEVICE_PACKAGES := kmod-rtw88-8723du kmod-usb-net-cdc-ncm kmod-usb-net-rndis wpad-openssl
rockchip: add support for Radxa ROCK Pi E v3.0 Radxa ROCK Pi E v3.0 is a compact networking SBC[1] using the Rockchip RK3328 SoC. Hardware -------- - Rockchip RK3328 SoC - Quad A53 CPU - 512MB/1GB/2GB DDR4 RAM - 4/8/16/32GB eMMC - Micro SD Card slot - WiFi 4 and BT 4, or WiFi 5 and BT 5 (not supported yet) - 1x 1000M Ethernet with PoE support (additional PoE HAT required) - 1x 100M Ethernet - 1x USB 3.0 Type-A port (Host) - 1x 4-ring 3.5mm headphone jack - 40 Pin GPIO header [1] https://radxa.com/products/rockpi/pie Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15984 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-29 08:38:25 +09:00
endef
rockchip: drop Radxa ROCK Pi E v3.0 build We uses miniloader so memory profile difference can be ignored. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-09-13 17:14:38 +08:00
TARGET_DEVICES += radxa_rock-pi-e
rockchip: add support for Radxa ROCK Pi E v3.0 Radxa ROCK Pi E v3.0 is a compact networking SBC[1] using the Rockchip RK3328 SoC. Hardware -------- - Rockchip RK3328 SoC - Quad A53 CPU - 512MB/1GB/2GB DDR4 RAM - 4/8/16/32GB eMMC - Micro SD Card slot - WiFi 4 and BT 4, or WiFi 5 and BT 5 (not supported yet) - 1x 1000M Ethernet with PoE support (additional PoE HAT required) - 1x 100M Ethernet - 1x USB 3.0 Type-A port (Host) - 1x 4-ring 3.5mm headphone jack - 40 Pin GPIO header [1] https://radxa.com/products/rockpi/pie Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15984 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-29 08:38:25 +09:00
rockchip: add support for Radxa ROCK Pi S Radxa ROCK Pi S is a small in size, full in features SBC[1] using the Rockchip RK3308B SoC. Hardware -------- - Rockchip RK3308B SoC - Quad A35 CPU - 256/512MB DDR3 RAM - Optional 4/8GB eMMC - Micro SD Card slot - Optional WiFi 4 and BT 4 (not supported yet) - 1x 100M Ethernet with PoE support (additional PoE HAT required) - 1x USB 2.0 Type-A port (Host) - 1x USB 2.0 Type-C port (OTG) - 2x 26 Pin GPIO header [1] https://radxa.com/products/rockpi/pis Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15933 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-22 08:01:56 +09:00
define Device/radxa_rock-pi-s
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK Pi S
SOC := rk3308
rockchip: fix sysupgrade for Radxa ROCK Pi S SUPPORTED_DEVICES is required for Radxa ROCK Pi S. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/16167 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-14 10:20:12 +09:00
SUPPORTED_DEVICES := radxa,rockpis
rockchip: add missing boot flow for rock pi s Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-07-29 19:12:02 +08:00
BOOT_FLOW := pine64-img
rockchip: add support for Radxa ROCK Pi S Radxa ROCK Pi S is a small in size, full in features SBC[1] using the Rockchip RK3308B SoC. Hardware -------- - Rockchip RK3308B SoC - Quad A35 CPU - 256/512MB DDR3 RAM - Optional 4/8GB eMMC - Micro SD Card slot - Optional WiFi 4 and BT 4 (not supported yet) - 1x 100M Ethernet with PoE support (additional PoE HAT required) - 1x USB 2.0 Type-A port (Host) - 1x USB 2.0 Type-C port (OTG) - 2x 26 Pin GPIO header [1] https://radxa.com/products/rockpi/pis Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15933 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-22 08:01:56 +09:00
BOOT_SCRIPT := rock-pi-s
Merge Official Source Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-08-01 14:59:15 +08:00
DEVICE_PACKAGES := kmod-rtw88-8723ds kmod-usb-net-cdc-ncm kmod-usb-net-rndis wpad-openssl
rockchip: add support for Radxa ROCK Pi S Radxa ROCK Pi S is a small in size, full in features SBC[1] using the Rockchip RK3308B SoC. Hardware -------- - Rockchip RK3308B SoC - Quad A35 CPU - 256/512MB DDR3 RAM - Optional 4/8GB eMMC - Micro SD Card slot - Optional WiFi 4 and BT 4 (not supported yet) - 1x 100M Ethernet with PoE support (additional PoE HAT required) - 1x USB 2.0 Type-A port (Host) - 1x USB 2.0 Type-C port (OTG) - 2x 26 Pin GPIO header [1] https://radxa.com/products/rockpi/pis Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15933 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-22 08:01:56 +09:00
endef
TARGET_DEVICES += radxa_rock-pi-s
rockchip: add support for Radxa ZERO 3E and 3W Radxa ZERO 3E and 3W are light, compact and tiny SBC[1][2] using the Rockchip RK3566. Hardware -------- - Rockchip RK3566 SoC - Quad A55 CPU - Mali-G52-2EE GPU - 1 TOPS @ INT8 NPU - 1GB/2GB/4GB/8G LPDDR4 RAM - Optional 8GB/16GB/32GB/64GB eMMC (3E) - Micro SD Card slot - 1x Gigabit ethernet port (supports PoE with add-on PoE HAT) (3E) - WiFi6/BT5.4 (3W) (not supported yet on OpenWrt) - 1x USB 3.0 Type-C HOST port - 1x USB 2.0 Type-C OTG port - Optional 40 Pin GPIO header [1] https://radxa.com/products/zeros/zero3e [2] https://radxa.com/products/zeros/zero3w Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/16185 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-22 10:09:21 +09:00
define Device/radxa_zero-3e
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ZERO 3E
SOC := rk3566
DEVICE_DTS := rockchip/rk3566-radxa-zero-3e
UBOOT_DEVICE_NAME := radxa-zero-3-rk3566
Merge Official Source Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-08-30 11:56:10 +08:00
BOOT_FLOW := pine64-img
rockchip: add support for Radxa ZERO 3E and 3W Radxa ZERO 3E and 3W are light, compact and tiny SBC[1][2] using the Rockchip RK3566. Hardware -------- - Rockchip RK3566 SoC - Quad A55 CPU - Mali-G52-2EE GPU - 1 TOPS @ INT8 NPU - 1GB/2GB/4GB/8G LPDDR4 RAM - Optional 8GB/16GB/32GB/64GB eMMC (3E) - Micro SD Card slot - 1x Gigabit ethernet port (supports PoE with add-on PoE HAT) (3E) - WiFi6/BT5.4 (3W) (not supported yet on OpenWrt) - 1x USB 3.0 Type-C HOST port - 1x USB 2.0 Type-C OTG port - Optional 40 Pin GPIO header [1] https://radxa.com/products/zeros/zero3e [2] https://radxa.com/products/zeros/zero3w Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/16185 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-22 10:09:21 +09:00
DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis
endef
TARGET_DEVICES += radxa_zero-3e
define Device/radxa_zero-3w
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ZERO 3W
SOC := rk3566
DEVICE_DTS := rockchip/rk3566-radxa-zero-3w
UBOOT_DEVICE_NAME := radxa-zero-3-rk3566
Merge Official Source Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-08-30 11:56:10 +08:00
BOOT_FLOW := pine64-img
rockchip: add support for Radxa ZERO 3E and 3W Radxa ZERO 3E and 3W are light, compact and tiny SBC[1][2] using the Rockchip RK3566. Hardware -------- - Rockchip RK3566 SoC - Quad A55 CPU - Mali-G52-2EE GPU - 1 TOPS @ INT8 NPU - 1GB/2GB/4GB/8G LPDDR4 RAM - Optional 8GB/16GB/32GB/64GB eMMC (3E) - Micro SD Card slot - 1x Gigabit ethernet port (supports PoE with add-on PoE HAT) (3E) - WiFi6/BT5.4 (3W) (not supported yet on OpenWrt) - 1x USB 3.0 Type-C HOST port - 1x USB 2.0 Type-C OTG port - Optional 40 Pin GPIO header [1] https://radxa.com/products/zeros/zero3e [2] https://radxa.com/products/zeros/zero3w Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/16185 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-22 10:09:21 +09:00
DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis
endef
TARGET_DEVICES += radxa_zero-3w
rockchip: add Bananapi-R2 Pro board support Hardware spec: - Rockchip RK3568 Quad-core ARM Cortex-A55 CPU 2GHz - GPU Mali-G52 1-Core-2EE OpenGL ES3.2 Vu1kn 1.1 OpenCL 2.0 - Memory2G DDR3 SDRAM (option 4G) - Storage Onboard 16GB eMMC Flash, Micro SD-Card slot, SATA 3.0 Port,SPI flash - Network 5 x 10/100/1000 Mbit/s Ethernet MT7531 - Display 1 HDMI port, 2 DSI interface(1 DSI can change to LVDS by software) - Camera 1 CSI camera interface - Audio Output HDMI & I2S & Speaker & Headphone - USB port USB 3.0 PORT (x2), micro USB OTG (x1) - PCIE 1 mini pcie interface & 1 M.2 key-e interface - Remote IR Receiver (x1) - GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). - Switches Reset button, Power button, U-boot button - LED Power Status - Power Source 12 volt 2A via DC Power Installation: Uncompress the OpenWrt sysupgrade and write image to the SD card using dd (dd if=*.img of=/*) Boot from the SD card 1-hold down the MaskRom button 2-Connect DC power 3-Wait 5 seconds, release the button. eMMC Installation: 1-Uncompress the OpenWrt sysupgrade image 2-fash to eMMC dd if=openwrt-rockchip-armv8-sinovoip_bpi-r2-pro-squashfs-sysupgrade.img of=/dev/mmcblk1 sync 3-remove SD card reboot Signed-off-by: Antonio Flores <antflores627@gmail.com>
2024-04-11 12:35:00 -04:00
define Device/sinovoip_bpi-r2-pro
rockchip: fix vendor name for bpi r2-pro Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-07-11 21:09:53 +08:00
DEVICE_VENDOR := Bananapi
DEVICE_MODEL := BPi-R2 Pro
rockchip: add Bananapi-R2 Pro board support Hardware spec: - Rockchip RK3568 Quad-core ARM Cortex-A55 CPU 2GHz - GPU Mali-G52 1-Core-2EE OpenGL ES3.2 Vu1kn 1.1 OpenCL 2.0 - Memory2G DDR3 SDRAM (option 4G) - Storage Onboard 16GB eMMC Flash, Micro SD-Card slot, SATA 3.0 Port,SPI flash - Network 5 x 10/100/1000 Mbit/s Ethernet MT7531 - Display 1 HDMI port, 2 DSI interface(1 DSI can change to LVDS by software) - Camera 1 CSI camera interface - Audio Output HDMI & I2S & Speaker & Headphone - USB port USB 3.0 PORT (x2), micro USB OTG (x1) - PCIE 1 mini pcie interface & 1 M.2 key-e interface - Remote IR Receiver (x1) - GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). - Switches Reset button, Power button, U-boot button - LED Power Status - Power Source 12 volt 2A via DC Power Installation: Uncompress the OpenWrt sysupgrade and write image to the SD card using dd (dd if=*.img of=/*) Boot from the SD card 1-hold down the MaskRom button 2-Connect DC power 3-Wait 5 seconds, release the button. eMMC Installation: 1-Uncompress the OpenWrt sysupgrade image 2-fash to eMMC dd if=openwrt-rockchip-armv8-sinovoip_bpi-r2-pro-squashfs-sysupgrade.img of=/dev/mmcblk1 sync 3-remove SD card reboot Signed-off-by: Antonio Flores <antflores627@gmail.com>
2024-04-11 12:35:00 -04:00
SOC := rk3568
SUPPORTED_DEVICES := sinovoip,rk3568-bpi-r2pro
rockchip: add missing BOOT_FLOW to bpi-r2 pro Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-05-06 11:59:01 +08:00
BOOT_FLOW := pine64-img
rockchip: add Bananapi-R2 Pro board support Hardware spec: - Rockchip RK3568 Quad-core ARM Cortex-A55 CPU 2GHz - GPU Mali-G52 1-Core-2EE OpenGL ES3.2 Vu1kn 1.1 OpenCL 2.0 - Memory2G DDR3 SDRAM (option 4G) - Storage Onboard 16GB eMMC Flash, Micro SD-Card slot, SATA 3.0 Port,SPI flash - Network 5 x 10/100/1000 Mbit/s Ethernet MT7531 - Display 1 HDMI port, 2 DSI interface(1 DSI can change to LVDS by software) - Camera 1 CSI camera interface - Audio Output HDMI & I2S & Speaker & Headphone - USB port USB 3.0 PORT (x2), micro USB OTG (x1) - PCIE 1 mini pcie interface & 1 M.2 key-e interface - Remote IR Receiver (x1) - GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). - Switches Reset button, Power button, U-boot button - LED Power Status - Power Source 12 volt 2A via DC Power Installation: Uncompress the OpenWrt sysupgrade and write image to the SD card using dd (dd if=*.img of=/*) Boot from the SD card 1-hold down the MaskRom button 2-Connect DC power 3-Wait 5 seconds, release the button. eMMC Installation: 1-Uncompress the OpenWrt sysupgrade image 2-fash to eMMC dd if=openwrt-rockchip-armv8-sinovoip_bpi-r2-pro-squashfs-sysupgrade.img of=/dev/mmcblk1 sync 3-remove SD card reboot Signed-off-by: Antonio Flores <antflores627@gmail.com>
2024-04-11 12:35:00 -04:00
DEVICE_PACKAGES := kmod-ata-ahci-dwc
endef
TARGET_DEVICES += sinovoip_bpi-r2-pro
rockchip: add OrangePi 5 (Plus) support Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-01-26 17:46:26 +08:00
define Device/xunlong_orangepi-5
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi 5
SOC := rk3588s
BOOT_FLOW := pine64-img
endef
TARGET_DEVICES += xunlong_orangepi-5
define Device/xunlong_orangepi-5-plus
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi 5 Plus
SOC := rk3588
BOOT_FLOW := pine64-img
DEVICE_PACKAGES := kmod-r8125
endef
TARGET_DEVICES += xunlong_orangepi-5-plus
rockchip: add support for OrangePi R1 Plus Hardware Specification: CPU: RockChip RK3328 (4 cores) RAM: 1GB DDR4 Ethernet: 2x 1000 Base-T Flash: SPI-NOR 16 MB (mx25l12835f) LED: SYS, LAN, WAN MicroSD Slot x 1 Button: Reset USB:1x 2.0 Serial1: 13 Pin pin-header Serial2: 3 Pin debug port Type-C: for power input Power Supply: DC 5V/2A Installation: Write the image to SD Card with dd. Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2021-03-28 21:00:18 +08:00
define Device/xunlong_orangepi-r1-plus
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi R1 Plus
SOC := rk3328
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: add support for OrangePi R1 Plus Hardware Specification: CPU: RockChip RK3328 (4 cores) RAM: 1GB DDR4 Ethernet: 2x 1000 Base-T Flash: SPI-NOR 16 MB (mx25l12835f) LED: SYS, LAN, WAN MicroSD Slot x 1 Button: Reset USB:1x 2.0 Serial1: 13 Pin pin-header Serial2: 3 Pin debug port Type-C: for power input Power Supply: DC 5V/2A Installation: Write the image to SD Card with dd. Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2021-03-28 21:00:18 +08:00
DEVICE_PACKAGES := kmod-usb-net-rtl8152
endef
TARGET_DEVICES += xunlong_orangepi-r1-plus
rockchip: add OrangePi R1 Plus LTS support This board is a fork of OrangePi R1 Plus, with native NIC changed. Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-01-04 17:01:13 +08:00
define Device/xunlong_orangepi-r1-plus-lts
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_VENDOR := Xunlong
rockchip: add OrangePi R1 Plus LTS support This board is a fork of OrangePi R1 Plus, with native NIC changed. Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-01-04 17:01:13 +08:00
DEVICE_MODEL := Orange Pi R1 Plus LTS
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
SOC := rk3328
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_PACKAGES := kmod-usb-net-rtl8152
rockchip: add OrangePi R1 Plus LTS support This board is a fork of OrangePi R1 Plus, with native NIC changed. Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-01-04 17:01:13 +08:00
endef
TARGET_DEVICES += xunlong_orangepi-r1-plus-lts
Reference in New Issue Copy Permalink