Add AmlCodeGenMethod() to generate code for a control method.
AmlCodeGenMethod ("MET0", 1, TRUE, 3, ParentNode, NewObjectNode)
is equivalent of the following ASL code:
Method(MET0, 1, Serialized, 3) {}
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
ASL provides a ResourceTemplate macro that creates a Buffer in which
resource descriptor macros can be listed. The ResourceTemplate macro
automatically generates an End descriptor and calculates the checksum
for the resource template.
Therefore, add AmlCodeGenResourceTemplate() to generate AML code for
the ResourceTemplate() macro. This function generates a Buffer node
with an EndTag resource data descriptor, which is similar to the ASL
ResourceTemplate() macro.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Some AML object have a PkgLen which indicates the size of the
AML object. The package length can be encoded in 1 to 4 bytes.
The bytes used to encode the PkgLen is itself counted in the
PkgLen value. So, if an AML object's size increments/decrements,
the number of bytes used to encode the PkgLen value can itself
increment/decrement.
Therefore, a helper function AmlComputePkgLength() is introduced
to simply computation of the PkgLen.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenPackage() to generate AML code for declaring
a Package() object. This function generates an empty package
node. New elements can then be added to the package's variable
argument list.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add a helper function AmlCodeGenEndTag() to generate AML Resource Data
EndTag. The EndTag resource data is automatically generated by the ASL
compiler at the end of a list of resource data elements. Therefore, an
equivalent function is not present in ASL.
However, AmlCodeGenEndTag() is useful when generating AML code for the
ResourceTemplate() macro.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenRegister() to generate AML code for the
Generic Register Resource Descriptor. This function is
equivalent to the ASL macro Register().
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Remove the STATIC qualifier for the AmlUtility function
AmlNodeGetIntegerValue() and add the definition to the
header file so that it can be used by other AmlLib
sub-modules.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The node creation functions:
- AmlCreateRootNode()
- AmlCreateObjectNode()
- AmlCreateDataNode()
are now resetting the input pointer where the created node is stored.
Thus, it is not necessary to set some local variables to NULL or
check a node value before trying to delete it.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The following functions:
- AmlCreateRootNode()
- AmlCreateObjectNode()
- AmlCreateDataNode()
create a node and return it by populating a pointer. This pointer
should only be considered/used if the function returns successfully.
Otherwise, the value stored in this pointer should be ignored.
For their error handling, some other functions assume that this
pointer is reset to NULL if an error occurs during a node creation.
To make this assumption correct, explicitly clear this input pointer.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
ACPI 6.4, s6.4.2.9 "End Tag":
"This checksum is generated such that adding it to the sum of all the data
bytes will produce a zero sum."
"If the checksum field is zero, the resource data is treated as if the
checksum operation succeeded. Configuration proceeds normally."
To avoid re-computing checksums, if a new resource data elements is
added/removed/modified in a list of resource data elements, the AmlLib
resets the checksum to 0.
This patch also refactors the AmlAppendRdNode() function by getting the
last Resource Data node directly instead of iterating over all the
elements of the list of Resource Data node.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Lists of Resource Data elements end with an EndTag (most of the time).
This function finds the EndTag (if present) in a list of Resource Data
elements and sets the checksum.
ACPI 6.4, s6.4.2.9 "End Tag":
"This checksum is generated such that adding it to the sum of all the data
bytes will produce a zero sum."
"If the checksum field is zero, the resource data is treated as if the
checksum operation succeeded. Configuration proceeds normally."
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlRdSetEndTagChecksum(), setting the CheckSum value contained in a
Resource Data element.
ACPI 6.4, s6.4.2.9 "End Tag":
"This checksum is generated such that adding it to the sum of all the
data bytes will produce a zero sum."
"If the checksum field is zero, the resource data is treated as if the
checksum operation succeeded. Configuration proceeds normally."
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
To fetch the Oem information from the ConfigurationManagerProtocol
and the AcpiTableInfo, and populate the SSDT ACPI header when
creating a RootNode via the AmlLib, create AddSsdtAcpiHeader().
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add missing check of 'AcpiTableInfo' in AddAcpiHeader().
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Buzilla: 3565 (https://bugzilla.tianocore.org/show_bug.cgi?id=3565)
As part of the updates to ACPI 6.4 the "SBSA Generic Watchdog" was
renamed to the "Arm Generic Watchdog". This patch implements that
change by updating the GTDT generator to use Acpi64.h and renames
any occurence of "SBSA Generic Watchdog" to "Arm Generic Watchdog".
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Rework all the functions to to have a generic prototype:
- First take take the resource data specific arguments.
E.g.: for a Register(): the AddressSpace, BitWidth, ...
- The penultimate parameter is a NameOpNode. The resource data
created is appended to the ResourceTemplate() contained in the
NameOpNode.
- The last parameter is a pointer holding the created resource data.
A least one of the two last parameter must be provided. One of them can
be omitted. This generic interface allows to either:
- Add the resource data to a NameOpNode. This is a common case for the
Ssdt tables generator.
- Get the created resource data and let the caller place it in an AML
tree.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Some functions in the AmlLib have 'Crs' in their name and can only
be applied to '_CRS' AML objects. To re-use them on AML objects that
have different names:
- Rename them and remove the '_CRS' name check.
- Create aliases having of the 'Crs' function prototypes. These
aliases are available when DISABLE_NEW_DEPRECATED_INTERFACES
is not defined. They will be deprecated in a near future.
The deprecated functions are:
- AmlNameOpCrsGetFirstRdNode()
- AmlNameOpCrsGetNextRdNode()
- AmlCodeGenCrsAddRdInterrupt()
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The correct formatter to print a CHAR8 char in edk2 is '%a'.
Replace the '%s' formatters by '%a'.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The Platform information repository in the Configuration Manager
may be dynamically populated, for e.g. by a Hardware Information
Parser like FdtHwInfoParser. In such cases it is useful to trace
the CM objects that were populated by the parser.
Therefore, introduce helper functions that can parse and trace
the Configuration Manager Objects.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add a function converting a 7 characters string to its UINT32
EISAID. The algorithm used to create the EISAID is described
in the ACPI 6.4 specification, s19.3.4 "ASL Macros".
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add HexFromAscii(), converting an hexadecimal ascii char
to an integer.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The Ecc tool forbids the usage of one char variable: Ecc error 8007:
"There should be no use of short (single character) variable names"
To follow this policy, rename this one letter parameter.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Update the inf file version and BASE_NAME of the library.
Remove unused sections.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The TableHelperLib contains helper functions. Some rely on
DynamicTablesPkg definitions (they use Configuration Manager objects).
Some others are more generic.
To allow using these generic functions without including
DynamicTablesPkg definitions, move them to a new AcpiHelperLib
library.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Use the newly introduced defined value in:
MdePkg/Include/IndustryStandard/AcpiAml.h
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The DBG2 table generator set the access size for the UART to
DWORD (4 bytes) by default. However, according to Section B
Generic UART, Arm Base System Architecture 1.0, Platform
Design Document, a Generic UART can have BYTE, WORD or DWORD
access sizes. To address this an AccessSize field has been
introduced in CM_ARM_SERIAL_PORT_INFO object.
This patch updates the DBG2 generator to setup the AccessSize
field in the Generic Address Structure (GAS) for the UART in
the DBG2 table with information provided by the platform.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The SPCR table generator set the access size for the UART to
DWORD (4 bytes) by default. However, according to Section B
Generic UART, Arm Base System Architecture 1.0, Platform
Design Document, a Generic UART can have BYTE, WORD or DWORD
access sizes. To address this an AccessSize field has been
introduced in CM_ARM_SERIAL_PORT_INFO object.
This patch updates the SPCR generator to setup the AccessSize
field in the Generic Address Structure (GAS) for the UART in
the SPCR table with information provided by the platform.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
According to ACPI 6.4, 6.1.5 _HID states:
- A valid PNP ID must be of the form "AAA####" where A is an uppercase
letter and # is a hex digit.
- A valid ACPI ID must be of the form "NNNN####" where N is an uppercase
letter or a digit ('0'-'9') and # is a hex digit.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Building the DynamicTablesPkg for a NOOPT target
fails because unused variables are set.
Remove these variables.
Fixes: d9800046ea
Reported-by: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Some platforms advertise support for a 16550 UART, but are not
compatible with the PNP0500 HID. Allow them to override the HID by
setting PcdNonBsaCompliant16550SerialHid.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Generic ACPI for Arm Components 1.0 Platform Design
Document, s2.6.4 "ASL code examples" provides information
to describe an Arm CoreLink CMN-600 Coherent Mesh Network
using an ASL definition block table.
The SSDT CMN-600 Table Generator uses the Configuration
Manager protocol to obtain the following information about
the CMN-600 device on the platform:
- the PERIPHBASE address location and address range;
- the ROOTNODEBASE address location;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
The CMN-600 mesh is described using the CM_ARM_CMN_600_INFO
and CM_ARM_EXTENDED_INTERRUPT structures in the Configuration
Manager.
The SSDT CMN-600 Table generator:
- gets the CMN-600 hardware information
from the configuration manager.
- uses the AmlLib interfaces to parse the AML
template BLOB and construct an AML tree.
- uses the AmlLib to update:
- the "_UID" value;
- the address location and range of the PERIPHBASE;
- the address location of the ROOTNODEBASE;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
- serializes the AML tree to an output buffer.
This output buffer contains the fixed-up AML code,
which is then installed as an ACPI SSDT table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Co-authored-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix the following ECC reported errors in SsdtSerialPortFixupLib.
- [9002] The function headers should follow Doxygen special
documentation blocks in section 2.3.5 in Comment,
<@param [in]> does NOT have [in, out]
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Change the AML_DEBUG_STR() macro to AML_OPCODE_DEF() that takes a string
and the AML OpCode as input so that the text description and the AML
OpCode are grouped. The AML_OPCODE_DEF() macro also strips the string
description for release builds.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix ECC error 8001 reported errors in AmlDbgPrint.
[8001] Only capital letters are allowed to be used
for #define declarations.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix the following ECC reported errors in AmlLib.
- [1008] File has invalid Non-ACSII char.
- [9002] The function headers should follow Doxygen special
documentation blocks in section 2.3.5 Comment does NOT
have tail **/
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix the following ECC reported error in AcpiSratLibArm.
- [9002] The function headers should follow Doxygen special
documentation blocks in section 2.3.5 Comment does NOT
have tail **/
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix the following ECC reported error in SsdtSerialPortLibArm.
- [5007] There should be no initialization of a variable as part of
its declaration Variable Name.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reordered the asserts to first check if the pointer is valid
before de-referencing the pointer.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The SSDT Serial port fixup library provides
interfaces to generate a SSDT Serial port table
based on the serial port information.
Update the DBG2 Generator to use the SSDT serial
port fixup library to build a serial port definition
block for the DBG2 serial port and install the
SSDT table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
According to Arm Server Base Boot Requirements,
Platform Design Document version 1.2 revision D,
September 2, 2019, section '4.2.1.8 SPCR'; the
SPCR console device must be included in the DSDT.
The SSDT Serial port fixup library provides
interfaces to generate a SSDT Serial port table
based on the serial port information.
Update the SPCR Generator to use the SSDT serial
port fixup library to build a serial port definition
block corresponding to the SPCR serial port and
install the SSDT table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Most platforms have several serial ports. These serial ports
are described to an operating system using definition block
tables.
The SSDT Serial Port Table Generator uses the Configuration
Manager protocol to obtain information for the Serial Ports
on the platform. The serial ports are described using the
CM_ARM_SERIAL_PORT_INFO structure. The EArmObjSerialPortInfo
ID is used to represent a standard serial port.
The SSDT Serial port fixup library provides interfaces to
generate a SSDT Serial port table based on the serial port
information. The SSDT Serial Port Table Generator uses the
SSDT serial port fixup library to build serial port
definition blocks and installs the SSDT tables.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
According to Arm Server Base Boot Requirements,
Platform Design Document version 1.2 revision D,
September 2, 2019, section '4.2.1.8 SPCR'; The
SPCR console device must be included in the DSDT.
Additionally, it is often desirable to describe the
serial ports available on a platform so that they
are available for use by a rich OS.
To facilitate the description of serial ports on a
platform a common SSDT Serial Port Fixup library is
introduced. It provides interfaces to build a SSDT
serial port definition block table based on the
serial port information.
The SSDT Serial Port Fixup library is used by the
SPCR, DBG2 and SSDT Serial Port generator to describe
the serial port information in a definition block.
+------------+ +------------+ +------------+
| SPCR Gen | | DBG2 Gen | | SERIAL Gen |
+------------+ +------------+ +------------+
+----------------------------------+
| SSDT Serial Port Fixup library |
+----------------------------------+
The SSDT Serial Port Fixup library:
- Parses the SSDT Serial Port template using the
AmlLib library to generate an AML tree.
- Updates the _UID, _HID and _CID values.
- Fixes up the Serial port base address, length
and the interrupt number in the _CRS descriptor.
- Fixes up the serial-port name.
- Serialises the AML Tree to a buffer containing
the definition block data.
The definition block data is then installed by the
corresponding table generator.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
AsciiFromHex is a function converts a hex number to an
ASCII character. This function is used across multiple
generators, so add it to the TableHelperLib.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
ACPI Definition blocks are implemented using AML which has
a complex grammar making run-time generation of definition
blocks difficult. Dynamic AML is a feature of Dynamic Tables
framework that provides a solution for dynamic generation of
ACPI Definition block tables.
Since, AML bytecode represents complex AML grammar, an AmlLib
library is introduced to assist parsing and traversing of the
AML bytecode at run-time.
The AmlLib library parses a definition block and represents it
as an AML tree. The AML objects, methods and data are represented
as tree nodes. Since the AML data is represented as tree nodes,
it is possible to traverse the tree, locate a node and modify the
node data. The tree can then be serialized to a buffer (that
represents the definition block). This definition block containing
the fixed-up AML code can then be installed as an ACPI Definition
Block table.
Dynamic AML introduces the following techniques:
* AML Fixup
* AML Codegen
* AML Fixup + Codegen
AML Fixup is a technique that involves compiling an ASL template
file to generate AML bytecode. This template AML bytecode can be
parsed at run-time and a fixup code can update the required fields
in the AML template.
AML Codegen employs generating small segments of AML code.
AmlLib provides a rich set of APIs to operate on AML data for AML
Fixup and Codegen.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
AmlLib library implements an AML parser, AML tree interface,
serialiser, code generator and other interfaces to generate
Definition Block tables.
The AmlLib APIs are a collection of interfaces that enable
parsing, iterating, modifying, adding, and serialising AML
data to generate a Definition Block table.
The AmlLib APIs are declared in Include\AmlLib\AmlLib.h
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
AML Core interface APIs are internal APIs of the
AmlLib library. These APIs can be used to:
- Create/Delete/Clone an AML tree/node
- Get/update Fixed and Variable arguments
- Serialize an AML tree.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
AML Codegen is a Dynamic AML technique that facilitates
generation of small segments of AML code. The AML code
generated using AML Codegen is represented as nodes in
the AML Tree.
AML Resource Data Codegen implements interfaces required
for generating Resource Data elements that can be attached
to an AML tree.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
AML Codegen is a Dynamic AML technique that facilitates
generation of small segments of AML code. The AML code
generated using AML Codegen is represented as nodes in
the AML Tree.
Some examples where AML Codegen can be used are:
- AML Codegen APIs can be used to generate a simple
AML tree.
- An AML template can be parsed to create an AML
tree. This AML Tree can be searched to locate a
node that needs updating. The AML Codegen APIs
can be used to attach new AML nodes.
- A combination of AML Fixup and AML Codegen can
be used to generate an AML tree.
The AML tree can then be serialised as a Definition
Block table.
Following AML Codegen APIs are implemented:
- AmlCodeGenDefinitionBlock()
- AmlCodeGenScope()
- AmlCodeGenNameString()
- AmlCodeGenNameInteger()
- AmlCodeGenDevice()
These AML Codegen APIs in combination with AML Resource
Data Codegen APIs can be used to generate a simple AML
tree.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Pierre Gondois