The wording was a bit confusing and misled at least one person into
thinking it behaved like `str.replace('c', '')` operating on the entire
line. Tweak the wording to be more precise and avoid this confusion.
This fixes two issues in constructing the default installation path
when install_dir is not specified:
- inside a subproject, install_data() would construct the destination
path using the parent project name instead than the current project
name,
- when specifying preserve_path, install_data() would construct the
destination path omitting the project name.
Fixes#11910.
Jar has a very low set of overlap with other target types, including
that jar sources *must* be .java, and no other target allows .java
sources. As such, the difficulty in crafting a useful `build_target`
invocation that allows both `jar` and anything else is high, and the
usefulness is dubious. Just use `jar()` directly instead.
This depends on the changes to make all of the jar() specific keyword
arguments be handled by typed_kwargs so that the deprecation messages
are correct and consistent.
This brings the formatting more in line with other modules, in
particular the headers do not include the full function signature for
readability, keyword arguments are listed one-by-one, etc.
While both kernels are derived from the OpenSolaris project of Sun, they
have diverged and code that works with one may not work with the other.
As such, we should provide different values for them. This was requested
by both Oracle and the illumos upstreams.
Fixes: #11922
* Capture all compile args from the first round of ninja backend generation for all languages used in building the targets so that these args, defines, and include paths can be applied to the .vcxproj's intellisense fields for all buildtypes/configurations.
Solution generation is now set up for mutiple build configurations (buildtypes) when using '--genvslite'.
All generated vcxprojs invoke the same high-level meson compile to build all targets; there's no selective target building (could add this later). Related to this, we skip pointlessly generating vcxprojs for targets that aren't buildable (BuildTarget-derived), which aren't of interest to the user anyway.
When using --genvslite, no longer inject '<ProjectReference ...>' dependencies on which a generated .vcxproj depends because that imposes a forced visual studio build dependency, which we don't want, since we're essentially bypassing VS's build in favour of running 'meson compile ...'.
When populating the vcxproj's shared intellisense defines, include paths, and compiler options fields, we choose the most frequent src file language, since this means more project src files can simply reference the project shared fields and fewer files of non-primary language types need to populate their full set of intellisense fields. This makes for smaller .vcxproj files.
Paths for generated source/header/etc files, left alone, would be added to solution projects relative to the '..._vs' build directory, where they're never generated; they're generated under the respective '..._[debug/opt/release]' ninja build directories that correspond to the solution build configuration. Although VS doesn't allow conditional src/header listings in vcxprojs (at least not in a simple way that I'm aware of), we can ensure these generated sources get adjusted to at least reference locations under one of the concrete build directories (I've chosen '..._debug') under which they will be generated.
Testing with --genvslite has revealed that, in some cases, the presence of 'c:\windows\system32;c:\windows' on the 'Path' environment variable (via the make-style project's ExecutablePath element) is critical to getting the 'meson compile ...' build to succeed. Not sure whether this is some 'find and guess' implicit defaults behaviour within meson or within the MSVC compiler that some projects may rely on. Feels weird but not sure of a better solution than forcibly adding these to the Path environment variable (the Executable Path property of the project).
Added a new windows-only test to windowstests.py ('test_genvslite') to exercise the --genvslite option along with checking that the 'msbuild' command invokes the 'meson compile ...' of the build-type-appropriate-suffixed temporary build dir and checks expected program output.
Check and report error if user specifies a non-ninja backend with a 'genvslite' setup, since that conflicts with the stated behaviour of genvslite. Also added this test case to 'WindowsTests.test_genvslite'
I had problems tracking down some problematic environment variable behaviour, which appears to need a work-around. See further notes on VSINSTALLDIR, in windowstests.py, test_genvslite.
'meson setup --help' clearly states that positional arguments are ... [builddir] [sourcedir]. However, BasePlatformTests.init(...) was passing these in the order [sourcedir] [builddir]. This was producing failures, saying, "ERROR: Neither directory contains a build file meson.build." but when using the correct ordering, setup now succeeds.
Changed regen, run_tests, and run_install utility projects to be simpler makefile projects instead, with commands to invoke the appropriate '...meson.py --internal regencheck ...' (or install/test) on the '[builddir]_[buildtype]' as appropriate for the curent VS configuration. Also, since the 'regen.vcxproj' utility didn't work correctly with '--genvslite' setup build dirs, and getting it to fully work would require more non-trivial intrusion into new parts of meson (i.e. '--internal regencheck', '--internal regenerate', and perhaps also 'setup --reconfigure'), for now, the REGEN project is replaced with a simpler, lighter-weight RECONFIGURE utility proj, which is unlinked from any solution build dependencies and which simply runs 'meson setup --reconfigure [builddir]_[buildtype] [srcdir]' on each of the ninja-backend build dirs for each buildtype.
Yes, although this will enable the building/compiling to be correctly configured, it can leave the solution/vcxprojs stale and out-of-date, it's simple for the user to 'meson setup --genvslite ...' to fully regenerate an updated, correct solution again. However, I've noted this down as a 'fixme' to consider implementing the full regen behaviour for the genvslite case.
* Review feedback changes -
- Avoid use of 'captured_compile_args_per_buildtype_and_target' as an 'out' param.
- Factored a little msetup.py, 'run(...)' macro/looping setup steps, for genvslite, out into a 'run_genvslite_setup' func.
* Review feedback: Fixed missing spaces between multi-line strings.
* 'backend_name' assignment gets immediately overwritten in 'genvslite' case so moved it into else/non-genvslite block.
* Had to bump up 'test cases/unit/113 genvslites/...' up to 114; it collided with a newly added test dir again.
* Changed validation of 'capture' and 'captured_compile_args_...' to use MesonBugException instead of MesonException.
* Changed some function param and closing brace indentation.
It's currently impossible to inject extra clang arguments when using
bindgen, which is problematic when cross compiling since you may need
critical arguments like `--target=...`. Because such arguments must be
passed after the `--` it's impossible to inject them currently without
going to something like a wrapper script.
Fixes: #11805
I noticed when building a project that uses a proc macro that Meson
passed -C prefer-dynamic for the executable, and not the proc macro,
while cargo passed -C prefer-dynamic for the proc macro, but not for
the executable. Meson's behavior broke setting -C panic=abort on the
executable.
As far as we can tell, because we explicitly pass each library path to
rustc, the only thing -C prefer-dynamic affects in Meson is how the
standard libraries are linked. Generally, one does not want the
standard libraries to be dynamically linked, because if the Rust
compiler is ever updated, anything linked against the old standard
libraries will likely break, due to the lack of a stable Rust ABI.
Therefore, I've reorganised Meson's behavior around the principle that
the standard libraries should only be dynamically linked when Rust
dynamic linking has already been opted into in some other way. The
details of how this manifests are now explained in the documentation.
This is a side effect of requiring Python >= 3.7 which itself guarantees
dictionary order. This is now a Meson language guarantee as well which
is required for passing default_options as dict and is generally
expected by users.
The new splitlines method on str is intended to replace usage of
fs.read('whatever').strip().split('\n').
The problem with the .strip().split() approach is that it doesn't have a
way to represent empty lists (an empty string becomes a list with one
empty string, not an empty list), and it doesn't handle Windows-style
line endings.
This is a pretty common pattern in python (the standard library uses it
a ton): A class is created, with a single private instance in the
module, and then it's methods are exposed as public API. This removes
the need for the global statement, and is generally a little easier to
reason about thanks to encapsulation.
Allow the use of wildcards (e.g. *) to match test names in `meson test`.
Raise an error is given test name does not match any test.
Optimize the search by looping through the list of tests only once.
We silently dropped all integer values to install_mode since the
original implementation of doing this in KwargInfo, in commit
596c8d4af5.
This happened because install_mode is supposed to convert False
(exactly) to None, and otherwise pass all arguments in place. But a
generator is homogeneous and attempting to do this correctly produced a
mypy error that FileMode arguments were allowed to be ints -- well of
course they are -- so that resulted in the convertor... treating ints
like False instead, to make mypy happy.
Fixes#11538
Reorder meson targets to handle those all at the end, and exit early if
HTML documentation is disabled. This makes it possible to build just the
manpage, without hotdoc installed.
For all source `*.py` files installed via either py.install_sources() or
an `install_dir: py.get_install_dir()`, produce `*.pyc` files at install
time. Controllable via a module option.
On Windows, the SDL2 library is generally provided with only CMake config
files. This commit allows meson to fallback on CMake as a last resort to
find the SDL2 library.
This allows changing the crate name with which a library ends up being
available inside the Rust code, similar to cargo's dependency renaming
feature or `extern crate foo as bar` inside Rust code.
Eli Schwartz