We used to immediately try to use whatever exe_wrapper was defined in
the cross file, but some people generate the cross file once and use
it for several projects, most of which do not even need an exe wrapper
to build.
Now we're a bit more resilient. We quietly fall back to using
non-exe-wrapper paths for compiler checks and skip the sanity check.
However, if some code needs the exe wrapper, f.ex., if you run a built
executable using custom_target() or run_target(), we will error out
during setup.
Tests will, of course, continue to error out when you run them if the
exe wrapper was not found. We don't want people's tests to silently
"pass" (aka skip) because of a bad CI setup.
Closes https://github.com/mesonbuild/meson/issues/3562
This commit also adds a test for the behaviour of exe_wrapper in these
cases, and refactors the unit tests a bit for it.
We already have code to fetch and find binaries specified in a cross
file, so use the same code for exe_wrapper. This allows us to handle
the same corner-cases that were fixed for other cross binaries.
ninja chokes when building FFmpeg's static libraries, as the
command line can be larger than 32000.
This was disabled on purpose in #1649, but the rsp syntax was
different: this commit makes it so the options and output file
are still passed on the command line, gcc-ar didn't work
otherwise.
Since `build_always` also adds a target to the set of default targets,
this option is marked deprecated in favour of the new option
`build_always_stale`.
`build_always_stale` *only* marks the target to be always considered out
of date, but does *not* add it to the set of default targets.
The old behaviour can still be achieved by combining
`build_always_stale` with `build_by_default`.
fixes#1942
On macOS, we set the install_name for built libraries to
@rpath/libfoo.dylib, and when linking to the library, we set the RPATH
to its path in the build directory. This allows all built binaries to
be run as-is from the build directory (uninstalled).
However, on install, we have to strip all the RPATHs because they
point to the build directory, and we change the install_name of all
built libraries to the absolute path to the library. This causes the
install name in binaries to be out of date.
We now change that install name to point to the absolute path to each
built library after installation.
Fixes https://github.com/mesonbuild/meson/issues/3038
Fixes https://github.com/mesonbuild/meson/issues/3077
With this, the default workflow on macOS matches what everyone seems
to do, including Autotools and CMake. The next step is providing a way
for build files to override the install_name that is used after
installation for use with, f.ex., private libraries when combined with
the install_rpath: kwarg on targets.
On Windows, if we are going to link with a shared module, we need the
implib.
Use case: The Xorg server builds some X protocol extensions as modules. The
implibs for these modules need to be shipped as part of the SDK, to enable
building of 3rd party extensions which reference symbols in (and hence on
Windows, need to be linked with) these modules.
Normally, people would just pass -fembed-bitcode in CFLAGS, but this
conflicts with -Wl,-dead_strip_dylibs and -bundle, so we need it as
an option so that those can be quietly disabled.
When the exe runner is `wine` or `wine32` or `wine64`, etc.
This allows people to run tests with wine.
Note that you also have to set WINEPATH to point to your custom
prefix(es) if your tests use external dependencies.
Closes https://github.com/mesonbuild/meson/issues/3620
This makes it possible to customize permissions of all installable
targets, such as executable(), libraries, man pages, header files and
custom or generated targets.
This is useful, for instance, to install setuid/setgid binaries, which
was hard to accomplish without access to this attribute.
To allow the javac -implicit:class behaviour to know where to find
generated .java files then the build directory for the target is also
added to the -sourcefile path.
Although only one file is passed to javac at a time, if your code has
any inter-file dependencies javac still needs to know how to find other
source files for its -implicit:class feature to work whereby it will
automatically also compile files that the given file depends on.
-implicit:class is the default, practical, behaviour of javac since
otherwise it would be necessary to declare the class dependencies
for parallel java builds to be feasible.
Passing "include_directory: include_directory('.')" to jar() causes
-souredir <path/to/top/of/java/src> to be passed to javac which then
enables your source code to have inter-file class dependencies -
assuming none of your source code is generated.
This ensures that '.' is included by default.
The -sourcepath option can't be passed multiple times to javac, since it
simply overrides prior arguments. Instead -sourcepath takes a colon (or
semi-colon on windows) separated list of paths.
The entire subdirectory was getting duplicated, which was exceeding the
max path limit in Python on Windows and causing build failures.
Example:
subprojects/gst-plugins-bad/gst-libs/gst/uridownloader/subprojects@gst-plugins-bad@gst-libs@gst@uridownloader@@gsturidownloader-1.0@sha/subprojects/gst-plugins-bad/gst-libs/gst/uridownloader/gsturidownloader-1.0-0.dll.symbols
This path is too long and opening it will cause a FileNotFoundError on
Windows.
- determine_ext_objs: What matters is if extobj.target is a unity build,
not if the target using those objects is a unity build.
- determine_ext_objs: Return one object file per compiler, taking into
account generated sources.
- object_filename_from_source: No need to special-case unity build, it
does the same thing in both code paths.
- check_unity_compatible: For each compiler we must extract either none
or all its sources, taking into account generated sources.
This option controls the permissions of installed files (except for
those specified explicitly using install_mode option, e.g. in
install_data rules.)
An install-umask of 022 will install all binaries, directories and
executable files with mode rwxr-xr-x, while all data and non-executable
files will be installed with mode rw-r--r--.
Setting install-umask to the string 'preserve' will disable this
feature, keeping the permissions of installed files same as the files in
the build tree (or source tree for install_data and install_subdir.)
Note that, in this case, the umask used when building and that used when
checking out the source tree will leak into the install tree.
Keep the default as 'preserve', to show that no behavior is changed and
all tests keep passing unchanged.
Tested: ./run_tests.py
This patch exploits the information residing in ltversion to set the
-compatibility_version and -current_version flags that are passed to the
linker on macOS.
This way they override all other arguments. This matches the order of
link arguments too.
Note that this means -I flags will come in afterwards and not override
anything else, but this is correct since that's how toolchain paths
work normally too -- they are searched last.
Closes https://github.com/mesonbuild/meson/issues/3089
The linkers currently do not support ninja compatible output of
dependencies used while linking. Try to guess which files will be used
while linking in python code and generate conservative dependencies to
ensure changes in linked libraries are detected.
This generates dependencies on the best match for static and shared
linking, but this should not be a problem, except for spurious
rebuilding when only one of them changes, which should not be a problem.
Also makes sure to ignore any libraries generated inside the build, to
keep the optimisation working where changes in a shared library only
cause relink if the symbols have changed as well.
Restore subproject exclusion for the html coverage report that existed
in the ninja backend legacy target.
Also exclude subprojects for the gcovr generated reports.
ninja coverage -> generate all possible reports (text, xml, html)
depending on gcovr and/or lcov/genhtml availability.
ninja coverage-html -> generate only html report
ninja coverage-xml -> generate only xml report
ninja coverage-text -> generate only text report
Make all targets phony, the old legacy rules where just annoying as
you would have to remove the old report before being able to generate
a new one.
ninja coverage succeeds if it can generate at least one report.
ninja coverage-* only succeeds if it can generate the requested report
Fixes the bug with flat layout and identical target names in subprojects.
Without this change directories are not created with subproject prefix
and they can collide.
Remove dead makedirs code in Backend.__init__(), during initialization
of backend build.targets is empty. Create output directories in
Vs2010Backend.generate_projects() instead.
Also use double blank line in run_unittests.py according to
https://www.python.org/dev/peps/pep-0008/#blank-lines.
Modern gcovr includes html generation support so if lcov and
genhtml are not available fallback to gcovr.
Kept lcov and genhtml as default so to not surprise existing
users of coverage-html with the different output of gcovr.
gcovr added html support in 3.0 but as there already is a test
for 3.1 because of the changes to -r/--rootdir I opted to only
allow html generation for >= 3.1 to keep things simple.
In gcovr 3.1 the -r/--rootdir argument changed meaning causing
reports generated with gcovr 3.1 to not find the source files
and look for *.gcda in the whole source tree rather than the
build dir.
So, detect gcovr version and if 3.1 give build_root to -r instead
of source_root.
Change the code to store D properties as plain data. Only convert them
to compiler flags in the backend. This also means we can fully parse D
arguments without needing to know the compiler being used.
When building a Rust target with Rust library dependencies, an
`--extern` argument is now specified to avoid ambiguity between the
dependency library, and any crates of the same name in `rustc`'s
private sysroot.
Includes an illustrative test case.
The documentation doesn't require it and the interpreter code works around the
possibility of it being None. The ninja backend code however fails with
File "/home/whot/code/meson/mesonbuild/backend/ninjabackend.py", line 796, in generate_data_install
dstabs = os.path.join(subdir or None, plain_f)
File "/usr/lib64/python3.6/posixpath.py", line 78, in join
a = os.fspath(a)
TypeError: expected str, bytes or os.PathLike object, not NoneType
If install_dir is missing, default to datadir/projectname
We missed one particular edge-case in #2413: when the generated vala
file is inside --basedir, the path is not just the basename.c
Since this case can never happen in a project test, this includes a unit
test for the same.
Closes https://github.com/mesonbuild/meson/issues/815
- Pass exclude_files and exclude_directories relative to src_dir,
same as specified by user and documented in public install_subdir().
- Make do_copydir() interface similar to do_copyfile():
install src_dir contents to dst_dir.
- Remove src_prefix/src_dir code, it adds confusion and duplicates arguments.
Use single src_dir parameter instead.
- Make callers specify that src_dir contents should be installed
under dst_dir/basename(src_dir) if necessary.
- Use os.path.relpath() instead of string manipulations on paths.
- Add documentation to do_copydir(): specify types and add usage example.
According to Python documentation[1] dirname and basename
are defined as follows:
os.path.dirname() = os.path.split()[0]
os.path.basename() = os.path.split()[1]
For the purpose of better readability split() is replaced
by appropriate function if only one part of returned tuple
is used.
[1]: https://docs.python.org/3/library/os.path.html#os.path.split
Currently, we only consider the build depends of the Executable being
run when serializing custom targets. However, this is not always
sufficient, for example if the executable loads modules at runtime or if
the executable is actually a python script that loads a built module.
For these cases, we need to set PATH on Windows correctly or the custom
target will fail to run at build time complaining about missing DLLs.
Currently, run_target does not get namespaced for each subproject,
unlike executable and others. This means that two subprojects sharing
the same run_target name cause meson to crash.
Fix this by moving the subproject namespacing logic from the BuildTarget
class to the Target class.
This allows a CustomTarget to be indexed, and the resulting indexed
value (a CustomTargetIndex type), to be used as a source in other
targets. This will confer a dependency on the original target, but only
inserts the source file returning by index the original target's
outputs. This can allow a CustomTarget that creates both a header and a
code file to have it's outputs split, for example.
Fixes#1470
This also adds a "# noqa: F401" comment on an unused "import lzma",
which we are using it in a try/except block that is being used to
check if the lzma module is importable; of course it is unused.
v2: This turned out to be a little tricky.
mesonbuild/modules/__init__.py had the "unused" import:
from ..interpreterbase import permittedKwargs, noKwargs
However, that meant that the various modules could do things like:
from . import noKwargs # "." is "mesonbuild.modules"
Which breaks when you remove __init__.py's "unused" import. I
could have tagged that import with "# noqa: F401", but instead I
chose to have each of the module import directly from
"..interpreterbase" instead of ".".
Nirbheek Chauhan