openbios/config/scripts/switch-arch

#!/bin/sh

#
# MOLPATH is needed if you want to build openbios-mol.elf
#
MOLPATH=$HOME/mol-0.9.71

if [ x"$1" = x ]; then
  printf "Usage:\n  $0 [arch-config]...\n"
  printf "arch-config values supported for native builds:\n"
  printf " amd64, ppc, sparc32, sparc64, x86\n"
  printf "arch-config values supported for cross compiled builds:\n"
  printf " cross-ppc, cross-sparc32, cross-sparc64, cross-x86\n"
  exit 0
fi

crosscflags()
{
    local host=$1
    local target=$2

    if test "$host" = "powerpc" -o "$host" = "ppc" \
        -o "$host" = "mips" -o "$host" = "s390" \
        -o "$host" = "sparc32" -o "$host" = "sparc64" \
        -o "$host" = "m68k" -o "$host" = "armv4b"; then
        hostbigendian="yes"
    else
        hostbigendian="no"
    fi

# host long bits test
    if test "$host" = "sparc64" -o "$host" = "ia64" \
        -o "$host" = "amd64" -o "$host" = "x86_64" \
        -o "$host" = "alpha"; then
        hostlongbits="64"
    else
        hostlongbits="32"
    fi

    if test "$target" = "powerpc" -o "$target" = "ppc" \
        -o "$target" = "mips" -o "$target" = "s390" \
        -o "$target" = "sparc32" -o "$target" = "sparc64" \
        -o "$target" = "m68k" -o "$target" = "armv4b"; then
        targetbigendian="yes"
    else
        targetbigendian="no"
    fi

# target long bits test
    if test "$target" = "sparc64" -o "$target" = "ia64" \
        -o "$target" = "amd64"  -o "target" = "x86_64" \
        -o "$target" = "alpha"; then
        targetlongbits="64"
    else
        targetlongbits="32"
    fi

    if test "$targetbigendian" = "$hostbigendian"; then
        cflags="-USWAP_ENDIANNESS"
    else
        cflags="-DSWAP_ENDIANNESS"
    fi

    if test "$targetlongbits" = "$hostlongbits"; then
        cflags="$cflags -DNATIVE_BITWIDTH_EQUALS_HOST_BITWIDTH"
    elif test "$targetlongbits" -lt "$hostlongbits"; then
        cflags="$cflags -DNATIVE_BITWIDTH_SMALLER_THAN_HOST_BITWIDTH"
    else
        cflags="$cflags -DNATIVE_BITWIDTH_LARGER_THAN_HOST_BITWIDTH"
    fi

    if test "$host" = "x86" -a "$targetlongbits" = "64"; then
        cflags="$cflags -DNEED_FAKE_INT128_T"
    fi

    CROSSCFLAGS=$cflags
}

archname()
{
    HOSTARCH=`uname -m | sed -e s/i.86/x86/ -e s/i86pc/x86/ \
	-e s/sun4u/sparc64/ -e s/sparc$/sparc32/ \
	-e s/arm.*/arm/ -e s/sa110/arm/ -e s/x86_64/amd64/ \
	-e "s/Power Macintosh/ppc/"`
}

select_prefix()
{
    for TARGET in ${1}-linux-gnu- ${1}-elf- ${1}-eabi-
    do
        if type -p ${TARGET}gcc > /dev/null
        then
            return
        fi
    done
    if [ "$ARCH" = "$HOSTARCH" ]; then
        return
    fi
    echo "ERROR: no ${1} cross-compiler found !" 1>&2
    exit 1
}

if ! test -f utils/dist/debian/rules; then
	echo "switch-arch must be run from the top-level source directory" >&2
	exit 1
fi

# This is needed because viewvc messes with the permissions of executables:
chmod 755 utils/dist/debian/rules
chmod 755 config/scripts/switch-arch
chmod 755 config/scripts/reldir

if test "x$HOSTARCH" = "x"; then
    archname
fi

VERSION=`head VERSION`

echo "Configuring OpenBIOS on $HOSTARCH for $*"
for RULES_ARCH in $*; do
    if ! test -f config/examples/${RULES_ARCH}_config.xml; then
	echo "Cannot find config/examples/${RULES_ARCH}_config.xml" >&2
	exit 1
    fi

    ARCH=`echo $RULES_ARCH | sed s/cross-//g`
    case $ARCH in
        amd64)
        select_prefix x86_64
        CFLAGS="-fno-builtin"
        AS_FLAGS=
        ;;

        ppc)
        select_prefix powerpc
        CFLAGS="-msoft-float -fno-builtin-bcopy -fno-builtin-log2"
        AS_FLAGS=
        ;;

        sparc32)
        select_prefix sparc
        CFLAGS="-Wa,-xarch=v8 -Wa,-32 -m32 -mcpu=supersparc -fno-builtin"
        AS_FLAGS="-Wa,-xarch=v8 -Wa,-32"
        ;;

        sparc64)
        select_prefix sparc64
        CFLAGS="-Wa,-xarch=v9b -Wa,-64 -m64 -mcpu=ultrasparc -mcmodel=medany -fno-builtin"
        AS_FLAGS="-Wa,-xarch=v9b -Wa,-64"
        ;;

        x86)
        select_prefix i486
        CFLAGS="-fno-builtin -m32"
        AS_FLAGS="-Wa,-32"
        ;;
    esac
    if test "$ARCH" = "$RULES_ARCH"; then
        TARGET=""
    fi
    crosscflags $HOSTARCH $ARCH
    OBJDIR=obj-$ARCH
    printf "Initializing build tree $OBJDIR..."
    rm -rf "$OBJDIR"
    mkdir "$OBJDIR"
    mkdir -p $OBJDIR/target
    mkdir -p $OBJDIR/target/include
    mkdir -p $OBJDIR/target/arch
    mkdir -p $OBJDIR/target/arch/unix
    mkdir -p $OBJDIR/target/arch/$ARCH
    mkdir -p $OBJDIR/target/arch/ppc
    mkdir -p $OBJDIR/target/arch/ppc/briq # no autodetection of those..
    mkdir -p $OBJDIR/target/arch/ppc/pearpc
    mkdir -p $OBJDIR/target/arch/ppc/qemu
    mkdir -p $OBJDIR/target/arch/ppc/mol
    mkdir -p $OBJDIR/target/arch/x86
    mkdir -p $OBJDIR/target/arch/x86/xbox
    mkdir -p $OBJDIR/target/libgcc
    mkdir -p $OBJDIR/target/kernel
    mkdir -p $OBJDIR/target/libopenbios
    mkdir -p $OBJDIR/target/packages
    mkdir -p $OBJDIR/target/fs
    mkdir -p $OBJDIR/target/fs/grubfs
    mkdir -p $OBJDIR/target/fs/hfs
    mkdir -p $OBJDIR/target/fs/hfsplus
    mkdir -p $OBJDIR/target/fs/iso9660
    mkdir -p $OBJDIR/target/fs/ext2
    mkdir -p $OBJDIR/target/drivers
    mkdir -p $OBJDIR/target/libc
    mkdir -p $OBJDIR/host/include
    mkdir -p $OBJDIR/host/kernel
    mkdir -p $OBJDIR/forth
    ln -s ../../../include/arch/$ARCH $OBJDIR/target/include/asm
    #compile the host binary with target settings instead
    #ln -s ../../../include/arch/$HOSTARCH $OBJDIR/host/include/asm
    echo "ok."

    cd $OBJDIR
    SRCDIR=..
    ODIR=.

    printf "Creating target Makefile..."
    echo "ARCH=$ARCH" > $ODIR/config.mak
    echo "TARGET=$TARGET" >> $ODIR/config.mak
    echo "CFLAGS=$CFLAGS" >> $ODIR/config.mak
    echo "AS_FLAGS=$AS_FLAGS" >> $ODIR/config.mak
    echo "HOSTARCH?=$HOSTARCH" >> $ODIR/config.mak
    echo "CROSSCFLAGS=$CROSSCFLAGS" >> $ODIR/config.mak
    echo "VERSION=\"$VERSION\"" >> $ODIR/config.mak
    ln -s $SRCDIR/config/xml/rules.xml $ODIR/rules.xml
    ln -s $SRCDIR/config/examples/${RULES_ARCH}_config.xml $ODIR/config.xml
    ln -s ../Makefile.target $ODIR/Makefile
    xsltproc $SRCDIR/config/xml/xinclude.xsl $SRCDIR/build.xml > $ODIR/build-full.xml
    xsltproc $SRCDIR/config/xml/makefile.xsl $ODIR/build-full.xml > $ODIR/rules.mak
    echo "ok."
    printf "Creating config files..."
    xsltproc $SRCDIR/config/xml/config-c.xsl $SRCDIR/config/examples/${RULES_ARCH}_config.xml > $ODIR/host/include/autoconf.h
    xsltproc $SRCDIR/config/xml/config-c.xsl $SRCDIR/config/examples/${RULES_ARCH}_config.xml > $ODIR/target/include/autoconf.h
    xsltproc $SRCDIR/config/xml/config-forth.xsl $SRCDIR/config/examples/${RULES_ARCH}_config.xml > $ODIR/forth/config.fs
    echo "ok."

    grep CONFIG_MOL $ODIR/forth/config.fs >/dev/null && ( \
        echo "Using MOL path $MOLPATH..."; \
        ln -s $MOLPATH/src/shared/osi_calls.h $ODIR/target/include/; \
        ln -s $MOLPATH/src/shared/osi.h $ODIR/target/include/; \
        ln -s $MOLPATH/src/shared/prom.h $ODIR/target/include/; \
        ln -s $MOLPATH/src/include/boothelper_sh.h $ODIR/target/include/; \
        ln -s $MOLPATH/src/include/video_sh.h $ODIR/target/include/; \
        ln -s $MOLPATH/src/include/pseudofs_sh.h $ODIR/target/include/; \
        ln -s $MOLPATH/src/include/kbd_sh.h $ODIR/target/include/; \
        ln -s $MOLPATH/src/drivers/disk/include/scsi_sh.h $ODIR/target/include/; \
        ln -s $MOLPATH/src/drivers/disk/include/ablk_sh.h $ODIR/target/include/ ) || true

    cd $SRCDIR
done