Expose NVRAM compatibility
Linux requires the NVRAM to expose a 'nvram,flash' compatibility
in the device tree. Let's expose it so it's happy.
v2 adds a NEWWORLD macro to protect nvram,flash getting exposed in
oldworld macs.
Signed-off-by: Alexander Graf <alex@csgraf.de>
Signed-off-by: Laurent Vivier <Laurent@vivier.eu>
git-svn-id: svn://coreboot.org/openbios/openbios-devel@465 f158a5a8-5612-0410-a976-696ce0be7e32
PPC64: Switch to 32-bit mode in interrupts
All the code in OpenBIOS runs in 32 bits, which is fine. Now, when
an interrupt arrives, the 970 CPU automatically sets the MSR_SF bit,
making us run in 64 bit mode.
That breaks address calculation, because 'lis' and 'ba' get sign
extended.
In order to circumvent that mess, let's just go back to 32 bit mode
whenever we get an interrupt.
Signed-off-by: Alexander Graf <alex@csgraf.de>
Signed-off-by: Laurent Vivier <Laurent@vivier.eu>
git-svn-id: svn://coreboot.org/openbios/openbios-devel@464 f158a5a8-5612-0410-a976-696ce0be7e32
While booting a 64bit kernel, there is a small timeframe where OF and the kernel communicate with each other. Within that timeframe, DSI/ISI interrupts may occur, because some memory is not mapped yet.
Right now in case that happens, we jump into the DSI/ISI interrupt handler which clobbers the high 32 bits of the kernel's registers. In order to circumvent that, let's save/restore all 64 bits of all kernel registers when we get a DSI/ISI interrupt.
This patch enables a PPC64 Linux kernel to boot up to the point where it tries to set up the SLB entries (slbmte), which is not yet implemented in qemu.
v2 implements handling for the HIOR register, bringing interrupt handlers to RAM.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://coreboot.org/openbios/openbios-devel@462 f158a5a8-5612-0410-a976-696ce0be7e32
It gets up to the boot prompt and works rather good so far, though I haven't been able to run a kernel yet.
For more recent PowerPC CPUs the PTE layout has changed, so we need to take that into account and create PTEs according to the new layout and at the new physical positions.
Signed-off-by: Alexander Graf <alex@csgraf.de>
Signed-off-by: Laurent Vivier <Laurent@vivier.eu>
git-svn-id: svn://coreboot.org/openbios/openbios-devel@461 f158a5a8-5612-0410-a976-696ce0be7e32
It is needed to boot Fedora-10 as we must specify the path to the yaboot.conf.
To boot Fedora:
boot cd: conf=cd:,\ppc\ppc32\yaboot.conf
so "bootpath" is "cd:", and "bootargs" is "conf=cd:,\ppc\ppc32\yaboot.conf"
git-svn-id: svn://coreboot.org/openbios/openbios-devel@456 f158a5a8-5612-0410-a976-696ce0be7e32
To keep compatibility with yaboot (tested with debian install CD),
put in bootpath a fully qualified path (<device>:<partition>,<filename>)
git-svn-id: svn://coreboot.org/openbios/openbios-devel@442 f158a5a8-5612-0410-a976-696ce0be7e32
and pciids.sourceforge.net.
Also fix a confusion between Sabre and Simba device IDs.
git-svn-id: svn://coreboot.org/openbios/openbios-devel@437 f158a5a8-5612-0410-a976-696ce0be7e32
<boot-script>boot &device;:1,\suseboot\yaboot.ibm</boot-script>.
This would evaluate to boot cd:0,1\suseboot\yaboot.ibm which results
in a file not found error (seen on many openSUSE ppc media).
With this patch the above will evaluate to boot cd:0,\suseboot\yaboot.ibm
and yaboot will load.
Signed-off-by: Stefan Assmann <sassmann@suse.de>
git-svn-id: svn://coreboot.org/openbios/openbios-devel@429 f158a5a8-5612-0410-a976-696ce0be7e32
The current implementation of the milliseconds prom call on PowerPC is
totally buggy:
- The timer frequency returned by get_timer_freq() does not correspond
to the timer which is read.
- The dividend and the divisor of the division are swapped
- If called very often, this function is not precise
- Depending on the timer frequency and of the frequency of the calls,
the variable overflow after a few dozen of seconds.
Please find in this patch a totally new implementation. This fixes the
problem observed with the quik when a timeout is defined.
The timer frequency is defined using #define, I wonder if there is a
better place to put it.
It reads both low and high part of the timer to make sure there is no
overflow. It also removes the function that returns 0 on the first call
as this is not needed according to IEEE 1275-1994. Finally it computes
the real value of the timer each time, instead of adding a small value
to a variable at each function calls, in order to get a correct
precision if this method is call very often.
(Aurelien Jarno)
git-svn-id: svn://coreboot.org/openbios/openbios-devel@407 f158a5a8-5612-0410-a976-696ce0be7e32
If arch is ppc and machine arch id is heathrow, we create:
- properties in root node for a powermac beige
(Linux says "Powermac G3 (Silk)")
- "AAPL,interrupts" and "AAPL,address" properties in PCI device tree.
git-svn-id: svn://coreboot.org/openbios/openbios-devel@388 f158a5a8-5612-0410-a976-696ce0be7e32
Load two first sectors of the partition and check quik signature ('QUIK').
If it is quik, execute it to boot.
Currently partition and parameter are hardcoded to "hd:2" and "Linux".
git-svn-id: svn://coreboot.org/openbios/openbios-devel@385 f158a5a8-5612-0410-a976-696ce0be7e32
"PowerPC Processor binding to:
IEEE 1275-1994, Standard for Boot (Initialization, Configuration) Firmware
Revision: 2.1 (Approved Version), November 6, 1996"
7.1 Calling Convention:
Client interface preserves: msr, cr, r1, r2, r13-r31, sprg0-3, fpscr, f0-f31,
sr0-sr15, other SPRs.
This patch modifies of_client_callback(), to preserve r1, r2, r4-r31.
This is needed to be able to execute the first stage of quik which
supposes r7 is unmodified.
git-svn-id: svn://coreboot.org/openbios/openbios-devel@384 f158a5a8-5612-0410-a976-696ce0be7e32
