When mstateen registers are implemented, the AIA related
configurations need to be done in mstateen for the IMSIC
initialization to succeed.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Extend HART feature detection to discover Smstateen CSRs at boot-time
and configure mstateen envcfg bit depending on availability of
menvcfg CSR.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Smstateen extension provides a mechanism to plug potential
covert channels which are opened by extensions that add to
processor state that may not get context-switched.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The menvcfg.PBMTE bit is read-only zero when Svpbmt extension is not
available so we try to enable menvcfg.PBMTE bit irrespective whether
Svpbmt is available or not.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The bits to configure/enable Zicbo[m|z] extensions in the menvcfg
CSR are WARL. We try to enable these bits irrespective whether
these extensions are available or not because writes to these
bits will be ignored if these extensions are not available.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add the menvcfg CSR as a HART feature and detect it at boot time
using traping mechanism.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The latest RISC-V privileged specification introduces xenvcfg CSRs
to enable/disable certain features/extensions for lower privilege
modes. This patch adds defines for these new [m|h|s]envcfg CSRs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Add static detection to prevent the modification of struct fw_dynamic_info
from forgetting the modification of FW_DYNAMIC_INFO_xxx_OFFSET
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add static detection to prevent the modification of struct sbi_scratch
from forgetting the modification of SBI_SCRATCH_xxx_OFFSET
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add static detection to prevent the modification of struct sbi_platform
from forgetting the modification of SBI_PLATFORM_xxx_OFFSET
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
On 128-bit machines, sbi_load_xx/sbi_store_xx needs to be improved.
Through this conditional compile, the corresponding implementation
can be prompted to be added.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
lwu exists under the current rv64 and should also exist under the rv128
in the future, so I modified the conditions of conditional compilation
so that it can adapt to the future situation
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
pmp_set/pmp_get calculates the location of the CSR register separately
through conditional compilation. In the case of non-32-bit and 64-bit,
we can report an error directly through #error without putting it at
runtime
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Initial commit of the xlnx-uartlite device and FDT support. This was
tested by running OpenSBI on a modified QEMU virt machine using the
xlnx-uartlite for serial.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the external interrupt handling is scattered between
sbi_init and sbi_trap. This patch moves all external interrupt
handling into a simple framework called sbi_irqchip.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Be more verbose on region confict, print addresses in conflict.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Fix typo in is_region_subset, regB_end should be calculated from regB.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
We should disable APLIC DT nodes in fdt_fixups() which are not
accessible to the next booting stage based on currently assigned
domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add simple FDT irqchip driver for APLIC so that generic platform (and
other FDT based platforms) can utilize common APLIC initialization library.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add simple APLIC initialization library which is independent of
hardware description format (FDT or ACPI). This APLIC initialization
library can be used by custom OpenSBI platform support to setup
APLIC domains.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We should disable IMSIC DT nodes in fdt_fixups() which are not
accessible to the next booting stage based on currently assigned
domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add simple FDT irqchip driver for IMSIC so that generic platform
(and other FDT based platforms) can utilize common IMIC library.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add simple IMSIC library which is independent of hardware description
format (FDT or ACPI). This IMSIC library can be used by custom OpenSBI
platform support to setup IMSIC for external interrupts.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We can have IPIs based on external interrupts provided by devices
such as AIA IMSIC so we should enable mie.MEIE bit at appropriate
places in generic library.
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We introduce nascent_init() platform callback which will allow
platforms to do very early initialization of platform specific
per-HART CSRs and per-HART devices.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We can have multiple FDT irqchip drivers to be probed when a RISC-V
system has different types of interrupt controller in a hierarchy.
This will be certainly the case when a RISC-V system has both
RISC-V AIA IMSIC and RISC-V AIA APLIC implemented.
We extend simple FDT irqchip framework to allow multiple FDT
irqchip drivers to be used for same RISC-V platform.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
This patch adds sbi_trap_set_external_irqfn() API which can be used by
OpenSBI platform code to set a callback function for external interrupts.
The RISC-V AIA IMSIC driver will use this API to implement inter-processor
interrupts on-top-of MSIs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We should use AIA CSRs to process local interrupts whenever AIA
is available.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The RISC-V AIA specification improves handling of per-HART local
interrupts in a backward compatible manner. This patch adds defines
for the new RISC-V AIA CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Previously, it was rounded down and that gives suboptimal results when
non-standard clock sources or baud rates are used.
Signed-off-by: Jakub Luzny <jakub.luzny@codasip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In a systems that provide strings.h and it is included
together with sbi_bitops.h the compilation error appears.
The ffs() and fls() are provided by strings.h
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
From version 2.38, binutils default to ISA spec version 20191213. This
means that the csr read/write (csrr*/csrw*) instructions and fence.i
instruction has separated from the `I` extension, become two standalone
extensions: Zicsr and Zifencei. As the kernel uses those instruction,
this causes the following build failure:
CC lib/sbi/sbi_tlb.o
<<BUILDDIR>>/lib/sbi/sbi_tlb.c: Assembler messages:
<<BUILDDIR>>/lib/sbi/sbi_tlb.c:190: Error: unrecognized opcode `fence.i'
make: *** [Makefile:431: <<BUILDDIR>>/build/lib/sbi/sbi_tlb.o] Error 1
The fix is to specify those extensions explicitly in -march. However as
older binutils version do not support this, we first need to detect
that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the mhpmevent CSRs are untouched during hart init during
cold/warm boot. Ideally, we should clear out all the bits except
overflow and MINH bit. That is required to disable overflow
interrupt and inhibit counting in M-mode to avoid any spurious
interrupts before perf start.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
PMU overflow interrupt should be disabled durinig initial configuration of
counters. They should be enabled while starting counters.
Fixes: 730f01bb41 ("lib: sbi: Support sscofpmf extension in OpenSBI")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The counter mapping in DT may be incorrect if all the counters specified
in the mapping are actually not physically present in the hardware.
OpenSBI should only keep a mapping of counters enabled in hardware and
defined in DT. This assume that all the programmable hpmcounters are
consecutive as it doesn't make sense to build a system with sparse
hpmcounters.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Using "void *" in arithmetic causes errors with strict compiler settings:
"error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]"
Avoid these by calculating on "char *" where 1-byte data size is assumed.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When the watchdog is running the HiFive Unmatched board does not reboot
properly and shuts down itself a few seconds after reboot, in the early
stages of the u-boot loading. On a Linux kernel this happens when the
da9063_wdt module is loaded. This does not happen if the module is
unloaded before reboot or if the watchdog module is loaded with
"stop_on_reboot=1".
Fix that by stopping the watchdog before attempting to reset the board.
This is done by zeroing the TWDSCALE field of CONTROL_D register, unless
it was already set to 0.
Reported-by: Tianon Gravi <tianon@debian.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Nikita Shubin <n.shubin@yadro.com>
Tested-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
da9063_reset() and da9063_shutdown() take the chip address in argument
(like similar functions), but in practice use the da9063 global struct
instead. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Some of RISC-V emulators provide HTIF at fixed base address so for
such emulators users have to hard-code HTIF base address in the
linker script.
To address this problem, we let users optionally provide fixed HTIF
base address via platform support (or device tree).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Currently, the ACLINT MSWI size check is forcing size to be at least
0x4000. This is inappropriate check because most systems will never
utilize full 16KB for a single ACLINT MSWI device so instead we should
check that ACLINT MSWI size is enough for on the associated HARTs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Some of the external firmwares using OpenSBI as library are facing
issues with the weak memcpy() and memset() aliases in libsbi.a so
we move these to fw_base.S. This way mapping of implicit memcpy()
or memset() calls to sbi_memcpy() or sbi_memset() will only be done
for OpenSBI firmwares.
(Refer, https://github.com/riscv-software-src/opensbi/issues/234)
In addition, we also add memmove() and memcmp() mappings in fw_base.S
because as-per the GCC documentation the freestanding environment must
provide memcpy(), memmove(), memset(), and memcmp().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
pmpcfg_csr and pmpcfg_shift are only negative for an unexpected value of
__riscv_xlen. We can immediately return in this case.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The commit 69d7e53 disables the -m(no-)save-restore option for
clang, but clang11 supports this option. This patch uses the
output information of the compiler to check whether the compiler
supports this option.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When compiling with -Os option along with -ffreestanding, both GCC
and clang will add implicit calls to memcpy() and memset() for stack
variables initialized in declaration.
The C standard as per Clause 4, the compiler cannot necessarily
assume that anything beyond:
* float.h
* iso646.h
* limits.h
* stdalign.h
* stdarg.h
* stdbool.h
* stddef.h
* stdint.h
* stdnoreturn.h
* fenv.h
* math.h
* and the numeric conversion functions of stdlib.h.
This patch maps memcpy() and memset() as weak-alias of sbi_memcpy()
and sbi_memset() respectively so that implicit calls to memcpy()
and memset() will compile properly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
The riscv target of CLANG-10 (or lower) does not support the
-m(no-)save-restore option so we get compile warnings. This patch
fixes compile warning by using -m(no-)save-restore option only
for GCC.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
We should check if SSCOF extension is present,
before applying inhibit mask and clearing overflow,
otherwise undesirable value can be written
in MHPMEVENT_N CSR.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
This commit makes Spike usable as QEMU (in fact, those are based on
QEMU examples).
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
RISC-V privilege specification does not specify how to encode the event ID.
Therefore, each platform is allowed to customize its own encoding rule.
The common encoding methods are as follow, directly assigning a number to an
event, or every bit in the mphmevent CSR controls one specified event or
mixes the above two methods.
To enable OpenSBI to support the above three encoding methods simultaneously,
this patch repurpose the dt property "riscv,raw-event-to-mhpmcounters". The
"riscv,raw-event-to-mhpmcounters" will describes the one or multiple raw
events that could be counted by a set of counters. But, the column number
of "riscv,raw-event-to-mhpmcounters" is extended from 2 to 3. The 1st column
(64bit) is the ID of the raw events. The 2nd column (64bit) represents a
select_mask now to represent the bits used for event ID encoding.
If a platform directly encodes each raw PMU event as a unique ID,
the value of select_mask will be 0xffffffff_ffffffff.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Atish Patra<atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Mayuresh Chitale