When the dt node has a status property and the value is not ok or
okay, skip initializing ipi.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
During Linux AIA driver review, the APLIC DT property for interrupt
delegation was renamed to "riscv,delegation" so let's use the new DT
property name and fallback to old DT property name if the new DT
property name is not available.
Fixes: 34612193af ("lib: utils/irqchip: Add FDT based driver for APLIC")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
"gpio-poweroff" and "gpio-restart" always set gpio to high to
active the function, but some chips need a low signal to active.
Fortunately, it can be achieved by setting GPIO_FLAG_ACTIVE_LOW
for the gpio. Implement this flag support for the gpio library
so the gpio reset can function well.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add extra sanity checks to prevent the caller getting the invalid result from
imsic_get_data() or imsic_get_target_file() when imsic is not initialized
correctly.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The current mlevel imsic check is only for the platform, which
may cause hart without imsic in the platform to trigger an
illegal instruction exception when initializing imsic. For
example, the platform contains a management hart that only
supports wired interrupts.
This patch will check if each hart supports Smaia extension
before doing imsic initialization to avoid triggering illegal
instruction exceptions.
Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
SG2042 uses an onboard MCU to provide reset function.
Add reset driver to support this onboard MCU.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
After calling fdt_node_offset_by_compatible() we must check its return
value and not an unrelated value.
Addresses-Coverity-ID: 1584993 Logically dead code
Fixes: 67ce5a763c ("platform: generic: Add support for specify coldboot harts in DT")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The address of the local scratch area is stored in each hart's mscratch
CSR. It is more efficient to read the CSR than to compute the address
from the hart ID.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The irqchip handlers will typically not need pointer to trap registers
so remove regs parameter of sbi_irqchip_process().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Added support for the generic platform to specify the set of coldboot
hart in DT. If not specified in DT, all harts are allowed to coldboot
as before.
The functions related to sbi_hartmask are not available before coldboot,
so I used bitmap, and added a new bitmap_test() function to test whether
a certain bit of the bitmap is set.
Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The parser will fail if the timer is clint timer and has regname
property. As the regname is only meaningful for aclint, it is more
robust to only check regname for aclint timer.
Fixes: 6112d58 ("lib: utils/fdt: Allow to use reg-names when parsing ACLINT")
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
On platforms with Smepmp, the MMIO regions accessed by M-mode need
to be explicitly marked with M-mode only read/write or shared (both
(M-mode and S-mode) read/write permission.
If the above is not done then runtime PLIC access from M-mode on
platforms with Smepmp will result in access fault when further
results in CPU hotplug not working.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Define an array sbi_hart_ext to map extension ID and name , and use it
for ISA parsing and printing out the supported extensions.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the fdt_parse_aclint_node() follows a fixed order to parse
ACLINT timer. This may cause the undesirable result when the ACLINT
device does not support mtime without adding an empty entry for it in
the DT.
To be robust, make fdt_parse_aclint_node() support "reg-names" property,
so it can parse the DT in an order independent way. For compatibility,
fdt_parse_aclint_node() only use "reg-names" when parsing ACLINT timer,
and will fallback to the old way if "reg-names" property is not found.
Link: https://lore.kernel.org/all/20231114-skedaddle-precinct-66c8897227bb@squawk/
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup patel <anup@brainfault.org>
The valid entry count is tracking by hw_event_count so there
is no need to check the whole table.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
To allow platform override pmu_init() filling the translation table
fdt_pmu_evt_select[] when PMU node doesn't provide such information,
we need to share the table and its entry counter with other .c file.
We also define the structures of PMU property in fdt_helper.h, so we
can initialize the mappings in arrays.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add a Kconfig option to control PMU fixup, so the next
stage software can dump the PMU node including event
mapping information for debugging purposes.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch makes the following changes:
- As sbi_platform_pmu_init() returns a negative error code on
failure, let sbi_pmu_init() print out the error code with
sbi_dprintf().
- In order to distinguish the SBI_EFAIL error returned by
sbi_pmu_add_*_counter_map(), return SBI_ENOENT to indicate
that fdt_pmu_setup() failed to locate "riscv,pmu" node, and
generic_pmu_init() ignores such case.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The old scheme doesn't allow sending hart0 self-IPI as the
corresponding bit on pending register is hardwired to 0, this
could lead to unhandle IPIs on SMP systems, esp. on single-core.
Furthermore, the limitation of old scheme is 8-core, instead of
reserving source hart information, we assign bit (x + 1) as the
enable and pending bit of hartx, this also expands the bootable
hart number.
The following diagram shows the enable bits of the new scheme
on 32-core Andes platform.
Pending regs: 0x1000 x---0---0---0---0------0---0
Pending hart ID: 0 1 2 3 ... 30 31
Interrupt ID: 0 1 2 3 4 ... 31 32
| | | | | | |
Enable regs: 0x2000 x---1---0---0---0-...--0---0---> hart0
| | | | | | |
0x2080 x---0---1---0---0-...--0---0---> hart1
| | | | | | |
0x2100 x---0---0---1---0-...--0---0---> hart2
| | | | | | |
0x2180 x---0---0---0---1-...--0---0---> hart3
. . . . . . .
. . . . . . .
. . . . . . .
0x2f00 x---0---0---0---0-...--1---0---> hart30
| | | | | | |
0x2f80 x---0---0---0---0-...--0---1---> hart31
<-------- word 0 -------><--- word 1 --->
To send IPI to hart0, for example, another hart (including hart0
itself) will set bit 1 of first word on the pending register.
We also fix indentation in andes_plicsw.h along with this patch.
Fixes: ce7c490719 ("lib: utils/ipi: Add Andes fdt ipi driver support")
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Randolph <randolph@andestech.com>
Reported-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lists.infradead.org/pipermail/opensbi/2023-October/005665.html
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, there are no barriers before or after the ipi_clear()
device callback which forces ipi_clear() device callback to always
use non-relaxed MMIO writes.
Instead of above, we use wmb() in after the ipi_clear() device
callback which pairs with the wmb() done before the ipi_send()
device callback. This also allows device ipi_clear() callback
to use relaxed MMIO writes.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reported-by: Bo Gan <ganboing@gmail.com>
Currently, we have a smp_wmb() between atomic_raw_set_bit() and
ipi_send() device callback whereas the MMIO writes done by the
device ipi_send() callback will also include a barrier.
We can avoid unnecessary/redundant barriers described above by
allowing relaxed MMIO writes in device ipi_send() callback. To
achieve this, we simply use wmb() instead of smp_wmb() before
calling device ipi_send().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reported-by: Bo Gan <ganboing@gmail.com>
Each APLIC CLRIE register allows disabling 32 interrupt sources at
a time by writing -1 so no need to write CLRIE register separately
for each interrupt source.
Fixes: 99792653de ("lib: utils/irqchip: Add APLIC initialization library")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
For some debuggers that do not implement SYSWRITEC and SYSREADC
operations, we have to use SYSWRITE and SYSREAD.
Instead of implementing semihosting_putc() using SYSWRITE, let us
simply remove semihosting_putc() because console_putc/console_puts
are now interchangeable.
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
- Add Zkr as extension in sbi_hart_extensions enum
- Return "zkr" string for Zkr extension from sbi_hart_extension_id2string
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The quirks checking will cause ACLINT step into a CLINT code path, this
is not expected when ACLINT needs custom quirks.
Add a new quirk to identify custom ACLINT, and apply the general quirks
after applying CLINT specific quirks.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In the past, we used fdt_reset_thead to help customers with prototype
verification. However, with the emergence of the Big-little SoC system,
it can no longer meet the demand. Therefore, we use zero_stage_boot
instead of fdt_reset_thead. It cleans up the opensbi code and ends the
disputation of reset_sample's dts.
This patch removes the fdt_reset_thead component and updates the related
doc.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
For some debuggers that do not implement SYSWRITEC and SYSREADC
operations, we can use SYSWRITE and SYSREAD instead like the
implementation of semihosting_getc().
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In starfive_gpio_direction_output() readl() is called twice to read the
gpio direction register. The result of the first read is discarded.
Remove the redundant read.
Fixes: 908be1b85c ("gpio/starfive: add gpio driver and support gpio reset")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The define is hard to read. The continue statement does not do what was
intended.
* Remove do {} while (false);
* Change the name to set_multi_letter_ext
- Other local macros are lower case too.
- Refer to the fact that this is only used for multi-letter extensions.
Addresses-Coverity-ID: 1568359 Unexpected control flow
Fixes: d72f5f1747 ("lib: utils: Add detection of Smepmp from ISA string in FDT")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
hart_exts == NULL can only occur if offset and node address lead to an
overflow resulting in exactly NULL. As we don't catch other values of
overflow it does not make sense to treat this one as special.
Addresses-Coverity-ID: 1568355 Logically dead code
Addresses-Coverity-ID: 1568358 Logically dead code
Fixes: 6259b2ec2d ("lib: utils/fdt: Fix fdt_parse_isa_extensions() implementation")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The added memory region should start from the base address.
Otherwise, the range will be shifted by reg_offset and not
able to merge consecutive NAPOT regions in the root domain,
resulting in wasted PMP entries.
Fixes: e8bc1621 ("lib: utils/serial: Add shared regions for
serial drivers")
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The syscon region used by OpenSBI should be marked as a shared
read-write region between M-mode and SU-mode.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
The serial driver regions used by OpenSBI should be marked as a shared
read-write regions between M-mode and SU-mode as those are accessed
by earlycon and the corresponding tty serial drivers running in 'S' mode.
When the smepmp extension is enabled, PMP entries for these shared regions
will get programmed.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Let us prefer hartindex over hartid in IPI framework which in-turn
forces IPI users to also prefer hartindex.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Currently, the sbi_hartmask is indexed by hartid which puts a
limit on hartid to be less than SBI_HARTMASK_MAX_BITS.
We extend the sbi_hartmask implementation to use hartindex and
support updating sbi_hartmask using hartid. This removes the
limit on hartid and existing code works largely unmodified.
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Currently, the fdt_parse_isa_extensions() tries to parse the ISA
string once for each HART. This ISA string parsing can fail for
secondary HARTs if the FDT memory is already overwritten by the
supervisor OS.
To tackle this issue, we improve the fdt_parse_isa_extensions()
implementation to pre-parse ISA string for all HARTs during
cold boot.
Fixes: d72f5f1747 ("lib: utils: Add detection of Smepmp from ISA
string in FDT")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-By: Mayuresh Chitale<mchitale@ventanamicro.com>
The functionality of SiFive Test reset driver is easily available
through Syscon reset driver so let us remove the SiFive Test driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Let us have common FDT based reset driver for syscon reboot and
poweroff. The device tree bindings for syscon reboot and poweroff
are already available in the Linux kernel sources.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Let us add a simple FDT based system regmap driver which follows the
device tree bindings already defined in the Linux kernel.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add a simple FDT based regmap framework which is built on top of
generic regmap library. The phandle of FDT regmap DT node is treated
as unique regmap ID. The FDT based regmap drivers will be probed
on-demand from fdt_regmap_get_by_phandle() and fdt_regmap_get()
called by the regmap client drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add generic regmap access library which is independent of
hardware description format (FDT or ACPI). The OpenSBI platform
support or regmap drivers can register regmap instances which
can be discovered by different regmap clients based on the
unique ID of regmap instances.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The "driver" pointer in struct i2c_adapter is not used anywhere
so let us remove it.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
License identifiers should be machine readable.
According to the SPDX v2.3.0 specification annex E parentheses are not
used in the SPDX identifier field when specifying multiple licenses [1].
[1] https://spdx.github.io/spdx-spec/v2.3/using-SPDX-short-identifiers-in-source-files/
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
- Add function to parse ISA string in FDT.
- Set Smepmp feature bit in extensions if "smepmp" string is found in ISA string.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, we see following compile error in the designeware GPIO driver
for RV32 systems:
lib/utils/gpio/fdt_gpio_designware.c:115:20: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
115 | chip->dr = (void *)addr + (bank * 0xc);
| ^
lib/utils/gpio/fdt_gpio_designware.c:116:21: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
116 | chip->ext = (void *)addr + (bank * 4) + 0x50;
We fix the above error using an explicit type-cast to 'unsigned long'.
Fixes: 7828eebaaa ("gpio/desginware: add Synopsys DesignWare APB GPIO support")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The cold_init() functions of ACLINT drivers should skip the HART
if sbi_hartid_to_scratch() returns NULL because we might be dealing
with a HART that is disabled in the device tree.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Add a driver for the Synopsys DesignWare APB GPIO IP block found in many
SoCs.
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Xiang W