Factor out dummy target creation from CreateTargetInternal.
This makes it impossible for dummy target creation to accidentally fail
due to too-strict checking in one of the CreateTargetInternal overloads.
Testing: check-lldb
rdar://70630655
Differential Revision: https://reviews.llvm.org/D90872
5d64574301 removes this enum value and now
all the switch statements that previously relied on handling this in the
'default' branch are causes compiler warnings due to redundant default cases.
This just removes the now unreachable code in there.
This class and it's surroundings contain a lot of shady code, but as far
as I can tell all of that code is unreachable (there is no code actually
setting the value to eValueTypeVector).
According to history this class was introduced in 2012 in
r167033/0665a0f09. At that time, the code seemed to serve some purpose,
and it had two entry points (in Value::SetContext and
ClangExpressionDeclMap::LookupDecl). The first entry point was deleted
in D17897 and the second one in r179842/44342735.
The stated purpose of the patch introducing this class was to fix
TestRegisters.py, and "expr $xmm0" in particular. Both of these things
function perfectly well these days without this class.
This allows the Target to update its module list when loading a shared
module replaces an equivalent one.
A testcase is added which hits this codepath -- without the fix, the
target reports libbreakpad.so twice in its module list.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D89157
The various GetSharedModule methods have an optional out parameter for
the old module when a file has changed or been replaced, which the
Target uses to keep its module list current/correct. We've been using
a single ModuleSP to track "the" old module, and this change switches
to using a SmallVector of ModuleSP, which has a couple benefits:
- There are multiple codepaths which may discover an old module, and
this centralizes the code for how to handle multiples in one place,
in the Target code. With the single ModuleSP, each place that may
discover an old module is responsible for how it handles multiples,
and the current code is inconsistent (some code paths drop the first
old module, others drop the second).
- The API will be more natural for identifying old modules in routines
that work on sets, like ModuleList::ReplaceEquivalent (which I plan
on updating to report old module(s) in a subsequent change to fix a
bug).
I'm not convinced we can ever actually run into the case that multiple
old modules are found in the same GetOrCreateModule call, but I think
this change makes sense regardless, in light of the above.
When an old module is reported, Target::GetOrCreateModule calls
m_images.ReplaceModule, which doesn't allow multiple "old" modules; the
new code calls ReplaceModule for the first "old" module, and for any
subsequent old modules it logs the event and calls m_images.Remove.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D89156
Displaying large packed bitfields did not work if one was accessing them
through a pointer, and he used the "->" notation ("[0]." notation is
fine). The reason for that is that implicit dereference in -> is plumbed
all the way down to ValueObjectChild::UpdateValue, where the process of
fetching the child value was forked for this flag. The bitfield
"sliding" code was implemented only for the branch which did not require
dereferencing.
This patch restructures the function to avoid this mistake. Processing
now happens in two stages.
- first the parent is dereferenced (if needed)
- then the child value is computed (this step includes sliding and is
common for both branches)
Differential Revision: https://reviews.llvm.org/D89236
In a new Range class was introduced to simplify and the Disassembler API
and reduce duplication. It unintentionally broke the
SBFrame::Disassemble functionality because it unconditionally converts
the number of instructions to a Range{Limit::Instructions,
num_instructions}. This is subtly different from the previous behavior,
where now we're passing a Range and assume it's valid in the callee, the
original code would propagate num_instructions and the callee would
compare the value and decided between disassembling instructions or
bytes.
Unfortunately the existing tests was not particularly strict:
disassembly = frame.Disassemble()
self.assertNotEqual(len(disassembly), 0, "Disassembly was empty.")
This would pass because without this patch we'd disassemble zero
instructions, resulting in an error:
(lldb) script print(lldb.frame.Disassemble())
error: error reading data from section __text
Differential revision: https://reviews.llvm.org/D89925
With the feedback I was getting in different diffs, I realized that splitting the parsing logic into two classes was not easy to deal with. I do see value in doing that, but I'd rather leave that as a refactor after most of the intel-pt logic is in place. Thus, I'm merging the common parser into the intel pt one, having thus only one that is fully aware of Intel PT during parsing and object creation.
Besides, based on the feedback in https://reviews.llvm.org/D88769, I'm creating a ThreadIntelPT class that will be able to orchestrate decoding of its own trace and can handle the stop events correctly.
This leaves the TraceIntelPT class as an initialization class that glues together different components. Right now it can initialize a trace session from a json file, and in the future will be able to initialize a trace session from a live process.
Besides, I'm renaming SettingsParser to SessionParser, which I think is a better name, as the json object represents a trace session of possibly many processes.
With the current set of targets, we have the following
- Trace: main interface for dealing with trace sessions
- TraceIntelPT: plugin Trace for dealing with intel pt sessions
- TraceIntelPTSessionParser: a parser of a json trace session file that can create a corresponding TraceIntelPT instance along with Targets, ProcessTraces (to be created in https://reviews.llvm.org/D88769), and ThreadIntelPT threads.
- ProcessTrace: (to be created in https://reviews.llvm.org/D88769) can handle the correct state of the traces as the user traverses the trace. I don't think there'll be a need an intel-pt specific implementation of this class.
- ThreadIntelPT: a thread implementation that can handle the decoding of its own trace file, along with keeping track of the current position the user is looking at when doing reverse debugging.
Differential Revision: https://reviews.llvm.org/D88841
This is a polymorphic class, copying it is a bad idea.
This was not a problem because most classes inheriting from it were
deleting their copy operations themselves. However, this enables us to
delete those explicit deletions, and ensure noone forgets to add them in
the future.
The problem here is in the "sliding" code in
ValueObjectChild::UpdateValue. It modifies m_bitfield_bit_offset and
m_value to ensure the bitfield value fits the window given by the
underlying type.
However, this is broken next time UpdateValue is called, because it
updates the m_value value from the parent. However, the value cannot be
slid again because the m_bitfield_bit_offset is already modified.
It seems this can happen only under specific circumstances. One way to
trigger is is to run an expression which can be interpreted (jitting it
causes a new StackFrame and ValueObject variables to be created).
I fix this bug by modifying m_byte_offset instead of m_scalar, and
ensuring the changes are folded into m_scalar regardless of how many
times UpdateValue is called.
Differential Revision: https://reviews.llvm.org/D88992
This is the first in a series of patches that will adds a new processor trace plug-in to LLDB.
The idea for this first patch to to add the plug-in interface with simple commands for the trace files that can "load" and "dump" the trace information. We can test the functionality and ensure people are happy with the way things are done and how things are organized before moving on to adding more functionality.
Processor trace information can be view in a few different ways:
- post mortem where a trace is saved off that can be viewed later in the debugger
- gathered while a process is running and allow the user to step back in time (with no variables, memory or registers) to see how each thread arrived at where it is currently stopped.
This patch attempts to start with the first solution of loading a trace file after the fact. The idea is that we will use a JSON file to load the trace information. JSON allows us to specify information about the trace like:
- plug-in name in LLDB
- path to trace file
- shared library load information so we can re-create a target and symbolicate the information in the trace
- any other info that the trace plug-in will need to be able to successfully parse the trace information
- cpu type
- version info
- ???
A new "trace" command was added at the top level of the LLDB commmands:
- "trace load"
- "trace dump"
I did this because if we load trace information we don't need to have a process and we might end up creating a new target for the trace information that will become active. If anyone has any input on where this would be better suited, please let me know. Walter Erquinigo will end up filling in the Intel PT specific plug-in so that it works and is tested once we can agree that the direction of this patch is the correct one, so please feel free to chime in with ideas on comments!
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D85705
This is currently causing msan warnings in the API tests when run under msan, e.g. `commands/gui/basic/TestGuiBasic.py`.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D86825
Currently it is hard to avoid having LLVM link to the system install of
ncurses, since it uses check_library_exists to find e.g. libtinfo and
not find_library or find_package.
With this change the ncurses lib is found with find_library, which also
considers CMAKE_PREFIX_PATH. This solves an issue for the spack package
manager, where we want to use the zlib installed by spack, and spack
provides the CMAKE_PREFIX_PATH for it.
This is a similar change as https://reviews.llvm.org/D79219, which just
landed in master.
Patch By: haampie
Differential Revision: https://reviews.llvm.org/D85820
The introduction of find_library for ncurses caused more issues than it solved problems. The current open issue is it makes the static build of LLVM fail. It is better to revert for now, and get back to it later.
Revert "[CMake] Fix an issue where get_system_libname creates an empty regex capture on windows"
This reverts commit 1ed1e16ab8.
Revert "Fix msan build"
This reverts commit 34fe9613dd.
Revert "[CMake] Always mark terminfo as unavailable on Windows"
This reverts commit 76bf26236f.
Revert "[CMake] Fix OCaml build failure because of absolute path in system libs"
This reverts commit 8e4acb82f7.
Revert "[CMake] Don't look for terminfo libs when LLVM_ENABLE_TERMINFO=OFF"
This reverts commit 495f91fd33.
Revert "Use find_library for ncurses"
This reverts commit a52173a3e5.
Differential revision: https://reviews.llvm.org/D86521
In some cases when we have a DW_AT_const_value and the data can be found in the
DWARFExpression then ValueObjectVariable does not handle it properly and we end
up with an extracting data from value failed error.
The test is a very stripped down assembly file since reproducing this relies on the results of compiling with -O1 which may not be stable over time.
Differential Revision: https://reviews.llvm.org/D86311
Extract all the provider related logic from Reproducer.h and move it
into its own header ReproducerProvider.h. These classes are seeing most
of the development these days and this reorganization reduces
incremental compilation from ~520 to ~110 files when making changes to
the new header.
I intentionally decided not to reset the column automatically
anywhere, because I don't know where and if at all that should happen.
There should be always an indication of being scrolled (too much)
to the right, so I'll leave this to whoever has an opinion.
Differential Revision: https://reviews.llvm.org/D85290
Currently it is hard to avoid having LLVM link to the system install of
ncurses, since it uses check_library_exists to find e.g. libtinfo and
not find_library or find_package.
With this change the ncurses lib is found with find_library, which also
considers CMAKE_PREFIX_PATH. This solves an issue for the spack package
manager, where we want to use the zlib installed by spack, and spack
provides the CMAKE_PREFIX_PATH for it.
This is a similar change as https://reviews.llvm.org/D79219, which just
landed in master.
Differential revision: https://reviews.llvm.org/D85820
We didn't do anything with the llvm::Error we get from `Open`, so when we end up in the
error case we just crash due to the llvm::Error sanity check. Also add the missing newline
behind the error message so it no longer messes with the next (lldb) prompt.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D85970
This is relanding D81001. The patch originally failed as on newer editline
versions it seems CC_REFRESH will move the cursor to the start of the line via
\r and then back to the original position. On older editline versions like
the one used by default on macOS, CC_REFRESH doesn't move the cursor at all.
As the patch changed the way we handle tab completion (previously we did
REDISPLAY but now we're doing CC_REFRESH), this caused a few completion tests
to receive this unexpected cursor movement in the output stream.
This patch updates those tests to also accept output that contains the specific
cursor movement commands (\r and then \x1b[XC). lldbpexpect.py received an
utility method for generating the cursor movement escape sequence.
Original summary:
I implemented autosuggestion if there is one possible suggestion.
I set the keybinds for every character. When a character is typed, Editline::TypedCharacter is called.
Then, autosuggestion part is displayed in gray, and you can actually input by typing C-k.
Editline::Autosuggest is a function for finding completion, and it is like Editline::TabCommand now, but I will add more features to it.
Testing does not work well in my environment, so I can't confirm that it goes well, sorry. I am dealing with it now.
Reviewed By: teemperor, JDevlieghere, #lldb
Differential Revision: https://reviews.llvm.org/D81001
When bit-field data was stored in a Scalar in ValueObjectChild during UpdateValue()
it was extracting the bit-field value. Later on in lldb_private::DumpDataExtractor(…)
we were again attempting to extract the bit-field. Which would then not obtain the
correct value. This will remove the extra extraction in UpdateValue().
We hit this specific case when values are passed in registers, which we could only
reproduce in an optimized build.
Differential Revision: https://reviews.llvm.org/D85376
This reverts commit 246afe0cd1. This broke
the following tests on Linux it seems:
lldb-api :: commands/expression/multiline-completion/TestMultilineCompletion.py
lldb-api :: iohandler/completion/TestIOHandlerCompletion.py
I implemented autosuggestion if there is one possible suggestion.
I set the keybinds for every character. When a character is typed, Editline::TypedCharacter is called.
Then, autosuggestion part is displayed in gray, and you can actually input by typing C-k.
Editline::Autosuggest is a function for finding completion, and it is like Editline::TabCommand now, but I will add more features to it.
Testing does not work well in my environment, so I can't confirm that it goes well, sorry. I am dealing with it now.
Reviewed By: teemperor, JDevlieghere, #lldb
Differential Revision: https://reviews.llvm.org/D81001
wattr_get is a macro, and the documentation states:
"The parameter opts is reserved for future use,
applications must supply a null pointer."
In practice, passing a variable there is harmless, except
that it is unused inside the macro, which causes unused
variable warnings.
The various places where
Use the same functionality as the non-gui mode, the colors just
need translating to curses colors.
Differential Revision: https://reviews.llvm.org/D85145
Without this, sources with long lines or variable names may overwrite
panel frames, or even overrun to the following line. There's currently
no way to scroll left/right in the views, so that should be added
to handle these cases.
This commit includes fixing constness of some Window functions,
and also makes PutCStringTruncated() consistent with the added
printf-like variant to take the padding as the first argument (can't
add it after the format to the printf-like function).
Differential Revision: https://reviews.llvm.org/D85123
On Hexagon, breakpoints need to be on the first instruction of a packet.
When the LLVM disassembler for Hexagon returned 32 bit instructions, we
needed code to find the start of the current packet. Now that the LLVM
disassembler for Hexagon returns packets instead of instructions, we always
have the first instruction of the packet. Remove the packet traversal code
because it can cause problems when the next packet has more than one
instruction.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D84966
It says it toggles breakpoints, so if one already exists
on the selected location, remove it instead of adding.
Differential Revision: https://reviews.llvm.org/D85098
My openSUSE 15.2 has /usr/include/curses.h as a symlink to
/usr/include/ncurses/curses.h , but there's no such symlink
for panel.h . Prefer using /usr/include/ncurses for the includes
if they are found there by the CMake check.
Differential Revision: https://reviews.llvm.org/D85219
As is common with curses apps, this allows to redraw everything
in case something corrupts the screen. Apparently key modifiers
are difficult with curses (curses FAQ it "doesn't do that"),
thankfully Ctrl+key are simply control characters, so it's
(ascii & 037) => 12.
Differential Revision: https://reviews.llvm.org/D84972
Let's just return a std::string to make this safe. formatv seemed overkill for formatting
the return values as they all just append an integer value to a constant string.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D84505
'd' would be much better used for up/down shortcuts, and this also removes
the possibility of ruining the whole debugging session by accidentally
hitting 'd' or 'k'. Also change menu to have both 'detach and resume'
and 'detach suspended' to make it clear which one is which. See
discussion at https://reviews.llvm.org/D68541 .
Differential Revision: https://reviews.llvm.org/D68908
This cleanup patch unifies all methods called GetByteSize() in the
ValueObject hierarchy to return an optional, like the methods in
CompilerType do. This means fewer magic 0 values, which could fix bugs
down the road in languages where types can have a size of zero, such
as Swift and C (but not C++).
Differential Revision: https://reviews.llvm.org/D84285
This re-lands the patch with bogus :m_byte_size(0) initalizations removed.
This cleanup patch unifies all methods called GetByteSize() in the
ValueObject hierarchy to return an optional, like the methods in
CompilerType do. This means fewer magic 0 values, which could fix bugs
down the road in languages where types can have a size of zero, such
as Swift and C (but not C++).
Differential Revision: https://reviews.llvm.org/D84285
ConstString is essentially trivially copyable yet it has a user defined
copy constructor that copies its one member pointer. Remove it so it
qualifies as trivial in the eyes of the compiler.
This also fixes two unused variable warnings now that the compiler knows
that the constructor has no side-effects.
Differential revision: https://reviews.llvm.org/D84440
This patch has no effect for C and C++. In more dynamic languages,
such as Objective-C and Swift GetByteSize() needs to call into the
language runtime, so it's important to pass one in where possible. My
primary motivation for this is some work I'm doing on the Swift
branch, however, it looks like we are also seeing warnings in
Objective-C that this may resolve. Everything in the SymbolFile
hierarchy still passes in nullptrs, because we don't have an execution
context in SymbolFile, since SymbolFile transcends processes.
Differential Revision: https://reviews.llvm.org/D84267
Summary:
When modules reference each other (which happens for example with the different
modules LLDB loads when debugging -gmodules-compiled binaries), just iterating
over the module list once isn't good enough to find all orphans. Any removed
modules in the module list will also clear up the shared pointers they hold to
other modules, so after any module was removed from the list, LLDB should
iterate again and check if any additional modules can no be safely deleted.
This is currently causing that many gmodules tests are not cleaning up all
allocated modules which causes cleanup asserts to fail (right now these asserts
just mark the test as unsupported, but after D83865 the tests will start
failing).
Reviewers: aprantl, clayborg, JDevlieghere
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D84015
Summary:
This patch extends the ModuleSpec class to include a
DataBufferSP which contains the module data. If this
data is provided, LLDB won't try to hit the filesystem
to create the Module, but use only the data stored in
the ModuleSpec.
Reviewers: labath, espindola
Subscribers: emaste, MaskRay, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83512
