* set_symbol_name, get_symbol_name, set_visibility, get_visibility, replace_all_symbol_uses, walk_symbol_tables
* In integrations I've been doing, I've been reaching for all of these to do both general IR manipulation and module merging.
* I don't love the replace_all_symbol_uses underlying APIs since they necessitate SYMBOL_COUNT walks and have various sharp edges. I'm hoping that whatever emerges eventually for this can still retain this simple API as a one-shot.
Differential Revision: https://reviews.llvm.org/D114687
There is no completely automated facility for generating stubs that are both accurate and comprehensive for native modules. After some experimentation, I found that MyPy's stubgen does the best at generating correct stubs with a few caveats that are relatively easy to fix:
* Some types resolve to cross module symbols incorrectly.
* staticmethod and classmethod signatures seem to always be completely generic and need to be manually provided.
* It does not generate an __all__ which, from testing, causes namespace pollution to be visible to IDE code completion.
As a first step, I did the following:
* Ran `stubgen` for `_mlir.ir`, `_mlir.passmanager`, and `_mlirExecutionEngine`.
* Manually looked for all instances where unnamed arguments were being emitted (i.e. as 'arg0', etc) and updated the C++ side to include names (and re-ran stubgen to get a good initial state).
* Made/noted a few structural changes to each `pyi` file to make it minimally functional.
* Added the `pyi` files to the CMake rules so they are installed and visible.
To test, I added a `.env` file to the root of the project with `PYTHONPATH=...` set as per instructions. Then reload the developer window (in VsCode) and verify that completion works for various changes to test cases.
There are still a number of overly generic signatures, but I want to check in this low-touch baseline before iterating on more ambiguous changes. This is already a big improvement.
Differential Revision: https://reviews.llvm.org/D114679
While working on an integration, I found a lot of inconsistencies on IR printing and verification. It turns out that we were:
* Only doing "soft fail" verification on IR printing of Operation, not of a Module.
* Failed verification was interacting badly with binary=True IR printing (causing a TypeError trying to pass an `str` to a `bytes` based handle).
* For systematic integrations, it is often desirable to control verification yourself so that you can explicitly handle errors.
This patch:
* Trues up the "soft fail" semantics by having `Module.__str__` delegate to `Operation.__str__` vs having a shortcut implementation.
* Fixes soft fail in the presence of binary=True (and adds an additional happy path test case to make sure the binary functionality works).
* Adds an `assume_verified` boolean flag to the `print`/`get_asm` methods which disables internal verification, presupposing that the caller has taken care of it.
It turns out that we had a number of tests which were generating illegal IR but it wasn't being caught because they were doing a print on the `Module` vs operation. All except two were trivially fixed:
* linalg/ops.py : Had two tests for direct constructing a Matmul incorrectly. Fixing them made them just like the next two tests so just deleted (no need to test the verifier only at this level).
* linalg/opdsl/emit_structured_generic.py : Hand coded conv and pooling tests appear to be using illegal shaped inputs/outputs, causing a verification failure. I just used the `assume_verified=` flag to restore the original behavior and left a TODO. Will get someone who owns that to fix it properly in a followup (would also be nice to break this file up into multiple test modules as it is hard to tell exactly what is failing).
Notes to downstreams:
* If, like some of our tests, you get verification failures after this patch, it is likely that your IR was always invalid and you will need to fix the root cause. To temporarily revert to prior (broken) behavior, replace calls like `print(module)` with `print(module.operation.get_asm(assume_verified=True))`.
Differential Revision: https://reviews.llvm.org/D114680
The purpose of the change is to make clear whether the user is
retrieving the original function or the wrapper function, in line with
the invoke commands. This new functionality is useful for users that
already have defined their own packed interface, so they do not want the
extra layer of indirection, or for users wanting to the look at the
resulting primary function rather than the wrapper function.
All locations, except the python bindings now have a `lookupPacked`
method that matches the original `lookup` functionality. `lookup`
still exists, but with new semantics.
- `lookup` returns the function with a given name. If `bool f(int,int)`
is compiled, `lookup` will return a reference to `bool(*f)(int,int)`.
- `lookupPacked` returns the packed wrapper of the function with the
given name. If `bool f(int,int)` is compiled, `lookupPacked` will return
`void(*mlir_f)(void**)`.
Differential Revision: https://reviews.llvm.org/D114352
Identifier and StringAttr essentially serve the same purpose, i.e. to hold a string value. Keeping these seemingly identical pieces of functionality separate has caused problems in certain situations:
* Identifier has nice accessors that StringAttr doesn't
* Identifier can't be used as an Attribute, meaning strings are often duplicated between Identifier/StringAttr (e.g. in PDL)
The only thing that Identifier has that StringAttr doesn't is support for caching a dialect that is referenced by the string (e.g. dialect.foo). This functionality is added to StringAttr, as this is useful for StringAttr in generally the same ways it was useful for Identifier.
Differential Revision: https://reviews.llvm.org/D113536
The ODS-based Python op bindings generator has been generating incorrect
specification of the operand segment in presence if both optional and variadic
operand groups: optional groups were treated as variadic whereas they require
separate treatement. Make sure it is the case. Also harden the tests around
generated op constructors as they could hitherto accept the code for both
optional and variadic arguments.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D113259
- Provide the operator overloads for constructing (semi-)affine expressions in
Python by combining existing expressions with constants.
- Make AffineExpr, AffineMap and IntegerSet hashable in Python.
- Expose the AffineExpr composition functionality.
Reviewed By: gysit, aoyal
Differential Revision: https://reviews.llvm.org/D113010
Symbol tables are a largely useful top-level IR construct, for example, they
make it easy to access functions in a module by name instead of traversing the
list of module's operations to find the corresponding function.
Depends On D112886
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D112821
Provide support for removing an operation from the block that contains it and
moving it back to detached state. This allows for the operation to be moved to
a different block, a common IR manipulation for, e.g., module merging.
Also fix a potential one-past-end iterator dereference in Operation::moveAfter
discovered in the process.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D112700
The current behavior is conveniently allowing to iterate on the regions of an operation
implicitly by exposing an operation as Iterable. However this is also error prone and
code that may intend to iterate on the results or the operands could end up "working"
apparently instead of throwing a runtime error.
The lack of static type checking in Python contributes to the ambiguity here, it seems
safer to not do this and require and explicit qualification to iterate (`op.results`, `op.regions`, ...).
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D111697
In several cases, operation result types can be unambiguously inferred from
operands and attributes at operation construction time. Stop requiring the user
to provide these types as arguments in the ODS-generated constructors in Python
bindings. In particular, handle the SameOperandAndResultTypes and
FirstAttrDerivedResultType traits as well as InferTypeOpInterface using the
recently added interface support. This is a significant usability improvement
for IR construction, similar to what C++ ODS provides.
Depends On D111656
Reviewed By: gysit
Differential Revision: https://reviews.llvm.org/D111811
Introduce the initial support for operation interfaces in C API and Python
bindings. Interfaces are a key component of MLIR's extensibility and should be
available in bindings to make use of full potential of MLIR.
This initial implementation exposes InferTypeOpInterface all the way to the
Python bindings since it can be later used to simplify the operation
construction methods by inferring their return types instead of requiring the
user to do so. The general infrastructure for binding interfaces is defined and
InferTypeOpInterface can be used as an example for binding other interfaces.
Reviewed By: gysit
Differential Revision: https://reviews.llvm.org/D111656
The change is based on the proposal from the following discussion:
https://llvm.discourse.group/t/rfc-memreftype-affine-maps-list-vs-single-item/3968
* Introduce `MemRefLayoutAttr` interface to get `AffineMap` from an `Attribute`
(`AffineMapAttr` implements this interface).
* Store layout as a single generic `MemRefLayoutAttr`.
This change removes the affine map composition feature and related API.
Actually, while the `MemRefType` itself supported it, almost none of the upstream
can work with more than 1 affine map in `MemRefType`.
The introduced `MemRefLayoutAttr` allows to re-implement this feature
in a more stable way - via separate attribute class.
Also the interface allows to use different layout representations rather than affine maps.
For example, the described "stride + offset" form, which is currently supported in ASM parser only,
can now be expressed as separate attribute.
Reviewed By: ftynse, bondhugula
Differential Revision: https://reviews.llvm.org/D111553
MemRefType was using a wrong `isa` function in the bindings code, which
could lead to invalid IR being constructed. Also run the verifier in
memref dialect tests.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D111784
When writing the user-facing documentation, I noticed several inconsistencies
and asymmetries in the Python API we provide. Fix them by adding:
- the `owner` property to regions, similarly to blocks;
- the `isinstance` method to any class derived from `PyConcreteAttr`,
`PyConcreteValue` and `PyConreteAffineExpr`, similar to `PyConcreteType` to
enable `isa`-like calls without having to handle exceptions;
- a mechanism to create the first block in the region as we could only create
blocks relative to other blocks, with is impossible in an empty region.
Reviewed By: gysit
Differential Revision: https://reviews.llvm.org/D111556
This exposes creating a CallSiteLoc with a callee & list of frames for
callers. Follows the creation approach in C++ side where a list of
frames may be provided.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D111670
* Need to investigate the proper solution to https://github.com/pybind/pybind11/issues/3336 or engineer something different.
* The attempt to produce an empty buffer_info as a workaround triggers asan/ubsan.
* Usage of this API does not arise naturally in practice yet, and it is more important to be asan/crash clean than have a solution right now.
* Switching back to raising an exception, even though that triggers terminate().
* This already half existed in terms of reading the raw buffer backing a DenseElementsAttr.
* Documented the precise expectations of the buffer layout.
* Extended the Python API to support construction from bitcasted buffers, allowing construction of all primitive element types (even those that lack a compatible representation in Python).
* Specifically, the Python API can now load all integer types at all bit widths and all floating point types (f16, f32, f64, bf16).
Differential Revision: https://reviews.llvm.org/D111284
Provide a couple of quality-of-life usability improvements for Python bindings,
in particular:
* give access to the list of types for the list of op results or block
arguments, similarly to ValueRange->TypeRange,
* allow for constructing empty dictionary arrays,
* support construction of array attributes by concatenating an existing
attribute with a Python list of attributes.
All these are required for the upcoming customization of builtin and standard
ops.
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D110946
Without this change, these attributes can only be accessed through the generic
operation attribute dictionary provided the caller knows the special operation
attribute names used for this purpose. Add some Python wrapping to support this
use case.
Also provide access to function arguments usable inside the function along with
a couple of quality-of-life improvements in using block arguments (function
arguments being the arguments of its entry block).
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D110758
We weren't retaining the ctypes closures that the ExecutionEngine was
calling back into, leading to mysterious errors.
Open to feedback about how to test this. And an extra pair of eyes to
make sure I caught all the places that need to be aware of this.
Differential Revision: https://reviews.llvm.org/D110661
Enables putting types and attributes in sets and in dicts as keys.
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D110301
* ODS generated operations extend _OperationBase and without this, cannot be marshalled to CAPI functions.
* No test case updates: this kind of interop is quite hard to verify with in-tree tests.
Differential Revision: https://reviews.llvm.org/D110030
* Now that packaging has stabilized, removes old mechanisms for loading extensions, preferring direct importing.
* Removes _cext_loader.py, _dlloader.py as unnecessary.
* Fixes the path where the CAPI dll is written on Windows. This enables that path of least resistance loading behavior to work with no further drama (see: https://bugs.python.org/issue36085).
* With this patch, `ninja check-mlir` on Windows with Python bindings works for me, modulo some failures that are actually due to a couple of pre-existing Windows bugs. I think this is the first time the Windows Python bindings have worked upstream.
* Downstream changes needed:
* If downstreams are using the now removed `load_extension`, `reexport_cext`, etc, then those should be replaced with normal import statements as done in this patch.
Reviewed By: jdd, aartbik
Differential Revision: https://reviews.llvm.org/D108489
* This allows multiple MLIR-API embedding downstreams to co-exist in the same process.
* I believe this is the last thing needed to enable isolated embedding.
Differential Revision: https://reviews.llvm.org/D108605
* It is pretty clear that no one has tried this yet since it was both incomplete and broken.
* Fixes a symbol hiding issues keeping even the generic builder from constructing an operation with successors.
* Adds ODS support for successors.
* Adds CAPI `mlirBlockGetParentRegion`, `mlirRegionEqual` + tests (and missing test for `mlirBlockGetParentOperation`).
* Adds Python property: `Block.region`.
* Adds Python methods: `Block.create_before` and `Block.create_after`.
* Adds Python property: `InsertionPoint.block`.
* Adds new blocks.py test to verify a plausible CFG construction case.
Differential Revision: https://reviews.llvm.org/D108898
* For python projects that don't need JIT/ExecutionEngine, cuts the number of files to compile roughly in half (with similar reduction in end binary size).
Differential Revision: https://reviews.llvm.org/D106992
Historically the builtin dialect has had an empty namespace. This has unfortunately created a very awkward situation, where many utilities either have to special case the empty namespace, or just don't work at all right now. This revision adds a namespace to the builtin dialect, and starts to cleanup some of the utilities to no longer handle empty namespaces. For now, the assembly form of builtin operations does not require the `builtin.` prefix. (This should likely be re-evaluated though)
Differential Revision: https://reviews.llvm.org/D105149
* Implements all of the discussed features:
- Links against common CAPI libraries that are self contained.
- Stops using the 'python/' directory at the root for everything, opening the namespace up for multiple projects to embed the MLIR python API.
- Separates declaration of sources (py and C++) needed to build the extension from building, allowing external projects to build custom assemblies from core parts of the API.
- Makes the core python API relocatable (i.e. it could be embedded as something like 'npcomp.ir', 'npcomp.dialects', etc). Still a bit more to do to make it truly isolated but the main structural reset is done.
- When building statically, installed python packages are completely self contained, suitable for direct setup and upload to PyPi, et al.
- Lets external projects assemble their own CAPI common runtime library that all extensions use. No more possibilities for TypeID issues.
- Begins modularizing the API so that external projects that just include a piece pay only for what they use.
* I also rolled in a re-organization of the native libraries that matches how I was packaging these out of tree and is a better layering (i.e. all libraries go into a nested _mlir_libs package). There is some further cleanup that I resisted since it would have required source changes that I'd rather do in a followup once everything stabilizes.
* Note that I made a somewhat odd choice in choosing to recompile all extensions for each project they are included into (as opposed to compiling once and just linking). While not leveraged yet, this will let us set definitions controlling the namespacing of the extensions so that they can be made to not conflict across projects (with preprocessor definitions).
* This will be a relatively substantial breaking change for downstreams. I will handle the npcomp migration and will coordinate with the circt folks before landing. We should stage this and make sure it isn't causing problems before landing.
* Fixed a couple of absolute imports that were causing issues.
Differential Revision: https://reviews.llvm.org/D106520
libMLIRPublicAPI.so came into existence early when the Python and C-API were being co-developed because the Python extensions need a single DSO which exports the C-API to link against. It really should never have been exported as a mondo library in the first place, which has caused no end of problems in different linking modes, etc (i.e. the CAPI tests depended on it).
This patch does a mechanical move that:
* Makes the C-API tests link directly to their respective libraries.
* Creates a libMLIRPythonCAPI as part of the Python bindings which assemble to exact DSO that they need.
This has the effect that the C-API is no longer monolithic and can be subset and used piecemeal in a modular fashion, which is necessary for downstreams to only pay for what they use. There are additional, more fundamental changes planned for how the Python API is assembled which should make it more out of tree friendly, but this minimal first step is necessary to break the fragile dependency between the C-API and Python API.
Downstream actions required:
* If using the C-API and linking against MLIRPublicAPI, you must instead link against its constituent components. As a reference, the Python API dependencies are in lib/Bindings/Python/CMakeLists.txt and approximate the full set of dependencies available.
* If you have a Python API project that was previously linking against MLIRPublicAPI (i.e. to add its own C-API DSO), you will want to `s/MLIRPublicAPI/MLIRPythonCAPI/` and all should be as it was. There are larger changes coming in this area but this part is incremental.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D106369
Adds `owner` python call to `mlir.ir.Value`.
Assuming that `PyValue.parentOperation` is intended to be the value's owner, this fixes the construction of it from `PyOpOperandList`.
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D103853
Extend the OpDSL with index attributes. After tensors and scalars, index attributes are the third operand type. An index attribute represents a compile-time constant that is limited to index expressions. A use cases are the strides and dilations defined by convolution and pooling operations.
The patch only updates the OpDSL. The C++ yaml codegen is updated by a followup patch.
Differential Revision: https://reviews.llvm.org/D104711
