This a follow-up PR from this other one:
https://github.com/llvm/llvm-project/pull/74413
Nothing calls into these two methods, so we (@DavidSpickett,
@adrian-prantl, and I) agreed to remove them once we merged the previous
PR.
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
This adds 23 new helper functions to LLDB's CompilerType class, things
like IsSmartPtrType, IsPromotableIntegerType,
GetNumberofNonEmptyBaseClasses, and GetTemplateArgumentType (to name a
few).
It also has run clang-format on the files CompilerType.{h,cpp}.
These helper functions are needed as part of the implementation for the
Data Inspection Language, (see
https://discourse.llvm.org/t/rfc-data-inspection-language/69893).
If you type `settings show <tab>` LLDB might crash, depending on the
version of libedit you're compiled with, and whether you're compiled
with `-DLLDB_EDITLINE_USE_WCHAR=0` (and depending on how the optimizer
lays out the stack...)
The issue has to do with trying to figure out whether the libedit
`getchar` callback is supposed to read a wide or 8 bit character. In
order to maintain backward compatibility, there's really no 'clean' way
to do it. We just have to make sure that we're invoking el_[w]getc with
a buffer that is as wide as the getchar callback (registered by the
`SetGetCharacterFunction` function further down in `Editline.cpp`.
So, it's 'fixed' with a comment, and a wider version of the 'reply'
variable.
Co-authored-by: Kevin Frei <freik@meta.com>
It's more meaningful and actionable to indicate which element in the
array has an issue by returning that element's index instead of its
value. The value can be ambiguous if at least one other element has the
same value.
The first parameter for these methods is `idxs`, an array of indices
that represent a path from a (root) parent to on of its descendants,
typically though intermediate descendants. When the path leads to a
descendant that doesn't exist, the method is supposed to indicate where
things went wrong by setting an index to `&index_of_error`, the second
parameter.
The problem is the method sets `*index_of_error` to the index of the
most recent parent's child in the hierarchy, which isn't very useful if
there's more one index with the same value in the path.
In this example, each element in the path has a value that's the same as
another element.
```cpp
GetChildAtIndexPath({1, 2, 3, 3, 1, 1, 2}, &index_of_error);
```
Say the the second `1` in the path (the 5th element at `[4]`) doesn't
exist and the code returns a `nullptr`. In that situation, the code sets
`*index_of_error` to `1`, but that's an ambiguous hint can implicate the
1st, 5th, or 6th element (at `[0]`, `[4]`, or `[5]`).
It’s more helpful to set `*index_of_error` to `4` to clearly indicate
which element in `idxs` has the issue.
This patch revives the effort to get this Phabricator patch into
upstream:
https://reviews.llvm.org/D137900
This patch was accepted before in Phabricator but I found some
-gsimple-template-names issues that are fixed in this patch.
A fixed up version of the description from the original patch starts
now.
This patch started off trying to fix Module::FindFirstType() as it
sometimes didn't work. The issue was the SymbolFile plug-ins didn't do
any filtering of the matching types they produced, and they only looked
up types using the type basename. This means if you have two types with
the same basename, your type lookup can fail when only looking up a
single type. We would ask the Module::FindFirstType to lookup "Foo::Bar"
and it would ask the symbol file to find only 1 type matching the
basename "Bar", and then we would filter out any matches that didn't
match "Foo::Bar". So if the SymbolFile found "Foo::Bar" first, then it
would work, but if it found "Baz::Bar" first, it would return only that
type and it would be filtered out.
Discovering this issue lead me to think of the patch Alex Langford did a
few months ago that was done for finding functions, where he allowed
SymbolFile objects to make sure something fully matched before parsing
the debug information into an AST type and other LLDB types. So this
patch aimed to allow type lookups to also be much more efficient.
As LLDB has been developed over the years, we added more ways to to type
lookups. These functions have lots of arguments. This patch aims to make
one API that needs to be implemented that serves all previous lookups:
- Find a single type
- Find all types
- Find types in a namespace
This patch introduces a `TypeQuery` class that contains all of the state
needed to perform the lookup which is powerful enough to perform all of
the type searches that used to be in our API. It contain a vector of
CompilerContext objects that can fully or partially specify the lookup
that needs to take place.
If you just want to lookup all types with a matching basename,
regardless of the containing context, you can specify just a single
CompilerContext entry that has a name and a CompilerContextKind mask of
CompilerContextKind::AnyType.
Or you can fully specify the exact context to use when doing lookups
like: CompilerContextKind::Namespace "std"
CompilerContextKind::Class "foo"
CompilerContextKind::Typedef "size_type"
This change expands on the clang modules code that already used a
vector<CompilerContext> items, but it modifies it to work with
expression type lookups which have contexts, or user lookups where users
query for types. The clang modules type lookup is still an option that
can be enabled on the `TypeQuery` objects.
This mirrors the most recent addition of type lookups that took a
vector<CompilerContext> that allowed lookups to happen for the
expression parser in certain places.
Prior to this we had the following APIs in Module:
```
void
Module::FindTypes(ConstString type_name, bool exact_match, size_t max_matches,
llvm::DenseSet<lldb_private::SymbolFile *> &searched_symbol_files,
TypeList &types);
void
Module::FindTypes(llvm::ArrayRef<CompilerContext> pattern, LanguageSet languages,
llvm::DenseSet<lldb_private::SymbolFile *> &searched_symbol_files,
TypeMap &types);
void Module::FindTypesInNamespace(ConstString type_name,
const CompilerDeclContext &parent_decl_ctx,
size_t max_matches, TypeList &type_list);
```
The new Module API is much simpler. It gets rid of all three above
functions and replaces them with:
```
void FindTypes(const TypeQuery &query, TypeResults &results);
```
The `TypeQuery` class contains all of the needed settings:
- The vector<CompilerContext> that allow efficient lookups in the symbol
file classes since they can look at basename matches only realize fully
matching types. Before this any basename that matched was fully realized
only to be removed later by code outside of the SymbolFile layer which
could cause many types to be realized when they didn't need to.
- If the lookup is exact or not. If not exact, then the compiler context
must match the bottom most items that match the compiler context,
otherwise it must match exactly
- If the compiler context match is for clang modules or not. Clang
modules matches include a Module compiler context kind that allows types
to be matched only from certain modules and these matches are not needed
when d oing user type lookups.
- An optional list of languages to use to limit the search to only
certain languages
The `TypeResults` object contains all state required to do the lookup
and store the results:
- The max number of matches
- The set of SymbolFile objects that have already been searched
- The matching type list for any matches that are found
The benefits of this approach are:
- Simpler API, and only one API to implement in SymbolFile classes
- Replaces the FindTypesInNamespace that used a CompilerDeclContext as a
way to limit the search, but this only worked if the TypeSystem matched
the current symbol file's type system, so you couldn't use it to lookup
a type in another module
- Fixes a serious bug in our FindFirstType functions where if we were
searching for "foo::bar", and we found a "baz::bar" first, the basename
would match and we would only fetch 1 type using the basename, only to
drop it from the matching list and returning no results
Fixes https://github.com/llvm/llvm-project/issues/57372
Previously some work has already been done on this. A PR was generated
but it remained in review:
https://reviews.llvm.org/D136462
In short previous approach was following:
Changing the symbol names (making the searched part colorized) ->
printing them -> restoring the symbol names back in their original form.
The reviewers suggested that instead of changing the symbol table, this
colorization should be done in the dump functions itself. Our strategy
involves passing the searched regex pattern to the existing dump
functions responsible for printing information about the searched
symbol. This pattern is propagated until it reaches the line in the dump
functions responsible for displaying symbol information on screen.
At this point, we've introduced a new function called
"PutCStringColorHighlighted," which takes the searched pattern, a prefix and suffix,
and the text and applies colorization to highlight the pattern in the
output. This approach aims to streamline the symbol search process to
improve readability of search results.
Co-authored-by: José L. Junior <josejunior@10xengineers.ai>
We need to generate events when finalizing, or we won't know that we
succeeded in stopping the process to detach/kill. Instead, we stall and
then after our 20 interrupt timeout, we kill the process (even if we
were supposed to detach) and exit.
OTOH, we have to not generate events when the Process is being
destructed because shared_from_this has already been torn down, and
using it will cause crashes.
In some situations it may be useful to have a separate DiagnosticManager
instance, and then later of move the contents of that instance back to
the "main" DiagnosticManager. For example, when silently retrying some
operation with different parameters, depending on whether the retry
succeeded or failed, LLDB may want to present a different set of
diagnostics to the user (the ones generated on the first try vs the
retry). Implement DiagnosticManager::Consume to allow for this use case.
I've plumbed the LLVM DebugInfoD client into LLDB, and added automatic
downloading of DWP files to the SymbolFileDWARF.cpp plugin. If you have
DEBUGINFOD_URLS set to a space delimited set of web servers, LLDB will
try to use them as a last resort when searching for DWP files. If you do
*not* have that environment variable set, nothing should be changed.
There's also a setting, per @clayborg 's suggestion, that will override
the environment variable, or can be used instead of the environment
variable. The setting is why I also needed to add an API to the
llvm-debuginfod library
### Test Plan:
Suggestions are welcome here. I should probably have some positive and
negative tests, but I wanted to get the diff up for people who have a
clue what they're doing to rip it to pieces before spending too much
time validating the initial implementation.
---------
Co-authored-by: Kevin Frei <freik@meta.com>
Co-authored-by: Alex Langford <nirvashtzero@gmail.com>
On macOS <vector> was already included via another
header file, but this failed on the CI bots. I'd
tested on linux earlier in this patch's life when
the headers were differently arranged.
(cherry picked from commit a0a1ff3ab4)
This patch is rearranging code a bit to add WatchpointResources to
Process. A WatchpointResource is meant to represent a hardware
watchpoint register in the inferior process. It has an address, a size,
a type, and a list of Watchpoints that are using this
WatchpointResource.
This current patch doesn't add any of the features of
WatchpointResources that make them interesting -- a user asking to watch
a 24 byte object could watch this with three 8 byte WatchpointResources.
Or a Watchpoint on 1 byte at 0x1002 and a second watchpoint on 1 byte at
0x1003, these must both be served by a single WatchpointResource on that
doubleword at 0x1000 on a 64-bit target, if two hardware watchpoint
registers were used to track these separately, one of them may not be
hit. Or if you have one Watchpoint on a variable with a condition set,
and another Watchpoint on that same variable with a command defined or
different condition, or ignorecount, both of those Watchpoints need to
evaluate their criteria/commands when their WatchpointResource has been
hit.
There's a bit of code movement to rearrange things in the direction I'll
need for implementing this feature, so I want to start with reviewing &
landing this mostly NFC patch and we can focus on the algorithmic
choices about how WatchpointResources are shared and handled as they're
triggeed, separately.
This patch also stops printing "Watchpoint <n> hit: old value: <x>, new
vlaue: <y>" for Read watchpoints. I could make an argument for print
"Watchpoint <n> hit: current value <x>" but the current output doesn't
make any sense, and the user can print the value if they are
particularly interested. Read watchpoints are used primarily to
understand what code is reading a variable.
This patch adds more fallbacks for how to print the objects being
watched if we have types, instead of assuming they are all integral
values, so a struct will print its elements. As large watchpoints are
added, we'll be doing a lot more of those.
To track the WatchpointSP in the WatchpointResources, I changed the
internal API which took a WatchpointSP and devolved it to a Watchpoint*,
which meant touching several different Process files. I removed the
watchpoint code in ProcessKDP which only reported that watchpoints
aren't supported, the base class does that already.
I haven't yet changed how we receive a watchpoint to identify the
WatchpointResource responsible for the trigger, and identify all
Watchpoints that are using this Resource to evaluate their conditions
etc. This is the same work that a BreakpointSite needs to do when it has
been tiggered, where multiple Breakpoints may be at the same address.
There is not yet any printing of the Resources that a Watchpoint is
implemented in terms of ("watchpoint list", or
SBWatchpoint::GetDescription).
"watchpoint set var" and "watchpoint set expression" take a size
argument which was previously 1, 2, 4, or 8 (an enum). I've changed this
to an unsigned int. Most hardware implementations can only watch 1, 2,
4, 8 byte ranges, but with Resources we'll allow a user to ask for
different sized watchpoints and set them in hardware-expressble terms
soon.
I've annotated areas where I know there is work still needed with
LWP_TODO that I'll be working on once this is landed.
I've tested this on aarch64 macOS, aarch64 Linux, and Intel macOS.
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
(cherry picked from commit fc6b72523f)
On macOS <vector> was already included via another
header file, but this failed on the CI bots. I'd
tested on linux earlier in this patch's life when
the headers were differently arranged.
This patch is rearranging code a bit to add WatchpointResources to
Process. A WatchpointResource is meant to represent a hardware
watchpoint register in the inferior process. It has an address, a size,
a type, and a list of Watchpoints that are using this
WatchpointResource.
This current patch doesn't add any of the features of
WatchpointResources that make them interesting -- a user asking to watch
a 24 byte object could watch this with three 8 byte WatchpointResources.
Or a Watchpoint on 1 byte at 0x1002 and a second watchpoint on 1 byte at
0x1003, these must both be served by a single WatchpointResource on that
doubleword at 0x1000 on a 64-bit target, if two hardware watchpoint
registers were used to track these separately, one of them may not be
hit. Or if you have one Watchpoint on a variable with a condition set,
and another Watchpoint on that same variable with a command defined or
different condition, or ignorecount, both of those Watchpoints need to
evaluate their criteria/commands when their WatchpointResource has been
hit.
There's a bit of code movement to rearrange things in the direction I'll
need for implementing this feature, so I want to start with reviewing &
landing this mostly NFC patch and we can focus on the algorithmic
choices about how WatchpointResources are shared and handled as they're
triggeed, separately.
This patch also stops printing "Watchpoint <n> hit: old value: <x>, new
vlaue: <y>" for Read watchpoints. I could make an argument for print
"Watchpoint <n> hit: current value <x>" but the current output doesn't
make any sense, and the user can print the value if they are
particularly interested. Read watchpoints are used primarily to
understand what code is reading a variable.
This patch adds more fallbacks for how to print the objects being
watched if we have types, instead of assuming they are all integral
values, so a struct will print its elements. As large watchpoints are
added, we'll be doing a lot more of those.
To track the WatchpointSP in the WatchpointResources, I changed the
internal API which took a WatchpointSP and devolved it to a Watchpoint*,
which meant touching several different Process files. I removed the
watchpoint code in ProcessKDP which only reported that watchpoints
aren't supported, the base class does that already.
I haven't yet changed how we receive a watchpoint to identify the
WatchpointResource responsible for the trigger, and identify all
Watchpoints that are using this Resource to evaluate their conditions
etc. This is the same work that a BreakpointSite needs to do when it has
been tiggered, where multiple Breakpoints may be at the same address.
There is not yet any printing of the Resources that a Watchpoint is
implemented in terms of ("watchpoint list", or
SBWatchpoint::GetDescription).
"watchpoint set var" and "watchpoint set expression" take a size
argument which was previously 1, 2, 4, or 8 (an enum). I've changed this
to an unsigned int. Most hardware implementations can only watch 1, 2,
4, 8 byte ranges, but with Resources we'll allow a user to ask for
different sized watchpoints and set them in hardware-expressble terms
soon.
I've annotated areas where I know there is work still needed with
LWP_TODO that I'll be working on once this is landed.
I've tested this on aarch64 macOS, aarch64 Linux, and Intel macOS.
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
This adds 23 new helper functions to LLDB's CompilerType class, things
like IsSmartPtrType, IsPromotableIntegerType,
GetNumberofNonEmptyBaseClasses, and GetTemplateArgumentType (to name a
few).
These helper functions are needed as part of the implementation for the
Data Inspection Language, (see
https://discourse.llvm.org/t/rfc-data-inspection-language/69893).
Small change to get `image dump separate-debug-info` working when using
`symbols.load-on-demand`.
Added tests to `TestDumpDwo`, and enabled the test for all platforms. If we fail to build, we skip the test, so this shouldn't cause the test to fail on unsupported platforms.
```
bin/lldb-dotest -p TestDumpDwo
```
It's easy to verify this manually by running
```
lldb --one-line-before-file "settings set symbols.load-on-demand true" <some_target>
(lldb) image dump separate-debug-info
...
```
---------
Co-authored-by: Tom Yang <toyang@fb.com>
This function is never used, neither here nor downstream in the Swift
fork. As far as I can tell, the same is true for the corresponding
eErrorTypeMachKernel but as that's part of the SB API we cannot remove
that.
Add a new API in SBTarget to Load Core from a SBFile.
This will enable a target to load core from a file descriptor.
So that in coredumper, we don't need to write core file to disk, instead
we can pass the input file descriptor to lldb directly.
Test:
```
(lldb) script
Python Interactive Interpreter. To exit, type 'quit()', 'exit()' or Ctrl-D.
>>> file_object = open("/home/hyubo/210hda79ms32sr0h", "r")
>>> fd=file_object.fileno()
>>> file = lldb.SBFile(fd,'r', True)
>>> error = lldb.SBError()
>>> target = lldb.debugger.CreateTarget(None)
>>> target.LoadCore(file,error)
SBProcess: pid = 56415, state = stopped, threads = 1
```
When setting conditional breakpoints, we currently assume that a call to
UserExpression::Parse() can be cached and resued multiple times. This
may not be true for every user expression. Add a new method so
subclasses of UserExpression can customize if they are parseable or not.
The Watchpoint and Breakpoint objects try to track the hardware index
that was used for them, if they are hardware wp/bp's. The majority of
our debugging goes over the gdb remote serial protocol, and when we set
the watchpoint/breakpoint, there is no (standard) way for the remote
stub to communicate to lldb which hardware index was used. We have an
lldb-extension packet to query the total number of watchpoint registers.
When a watchpoint is hit, there is an lldb extension to the stop reply
packet (documented in lldb-gdb-remote.txt) to describe the watchpoint
including its actual hardware index,
<addr within wp range> <wp hw index> <actual accessed address>
(the third field is specifically needed for MIPS). At this point, if the
stub reported these three fields (the stub is only required to provide
the first), we can know the actual hardware index for this watchpoint.
Breakpoints are worse; there's never any way for us to be notified about
which hardware index was used. Breakpoints got this as a side effect of
inherting from StoppointSite with Watchpoints.
We expose the watchpoint hardware index through "watchpoint list -v" and
through SBWatchpoint::GetHardwareIndex.
With my large watchpoint support, there is no *single* hardware index
that may be used for a watchpoint, it may need multiple resources. Also
I don't see what a user is supposed to do with this information, or an
IDE. Knowing the total number of watchpoint registers on the target, and
knowing how many Watchpoint Resources are currently in use, is helpful.
Knowing how many Watchpoint Resources
a single user-specified watchpoint needed to be implemented is useful.
But knowing which registers were used is an implementation detail and
not available until we hit the watchpoint when using gdb remote serial
protocol.
So given all that, I'm removing watchpoint hardware index numbers. I'm
changing the SB API to always return -1.
When this option gets enabled, descriptions of threads will be generated
using the format provided in the launch configuration instead of
generating it manually in the dap code. This allows lldb-dap to show an
output similar to the one in the CLI.
This is very similar to https://github.com/llvm/llvm-project/pull/71843
When this option gets enabled, descriptions of stack frames will be
generated using the format provided in the launch configuration instead
of simply calling `SBFrame::GetDisplayFunctionName`. This allows
lldb-dap to show an output similar to the one in the CLI.
Prior to this patch, each core file plugin (ObjectFileMachO.cpp and
ObjectFileMinindump.cpp) would calculate the address ranges to save in
different ways. This patch adds a new function to Process.h/.cpp:
```
Status Process::CalculateCoreFileSaveRanges(lldb::SaveCoreStyle core_style, CoreFileMemoryRanges &ranges);
```
The patch updates the ObjectFileMachO::SaveCore(...) and
ObjectFileMinindump::SaveCore(...) to use same code. This will allow
core files to be consistent with the lldb::SaveCoreStyle across
different core file creators and will allow us to add new core file
saving features that do more complex things in future patches.
Similar to my previous patch (#71613) where I changed
`GetItemAtIndexAsString`, this patch makes the same change to
`GetItemAtIndexAsDictionary`.
`GetItemAtIndexAsDictionary` now returns a std::optional that is either
`std::nullopt` or is a valid pointer. Therefore, if the optional is
populated, we consider the pointer to always be valid (i.e. no need to
check pointer validity).
This patch changes the interface of
StructuredData::Array::GetItemAtIndexAsString to return a
`std::optional<llvm::StringRef>` instead of taking an out parameter.
More generally, this commit serves as proposal that we change all of the
sibling APIs (`GetItemAtIndexAs`) to do the same thing. The reason this
isn't one giant patch is because it is rather unwieldy changing just one
of these, so if this is approved, I will do all of the other ones as
individual follow-ups.
Store a Checksum in FileSpec. Its purpose is to store the MD5 hash that
was added to the DWARF 5 line table.
This increases the size of a FileSpec from 24 to 40 bytes. The
alternative is to introduce a new SupportFile abstraction for a FileSpec
+ Checksum but that would require a corresponding SupportFileList class.
During review we decided that wasn't worth it, but that's something we
can revisit in the future.
The contents of which are mostly SPSR_EL1 as shown in the Arm manual,
with a few adjustments for things Linux says userspace shouldn't concern
itself with.
```
(lldb) register read cpsr
cpsr = 0x80001000
= (N = 1, Z = 0, C = 0, V = 0, SS = 0, IL = 0, ...
```
Some fields are always present, some depend on extensions. I've checked
for those extensions using HWCAP and HWCAP2.
To provide this for core files and live processes I've added a new class
LinuxArm64RegisterFlags. This is a container for all the registers we'll
want to have fields and handles detecting fields and updating register
info.
This is used by the native process as follows:
* There is a global LinuxArm64RegisterFlags object.
* The first thread takes a mutex on it, and updates the fields.
* Subsequent threads see that detection is already done, and skip it.
* All threads then update their own copy of the register information
with pointers to the field information contained in the global object.
This means that even though every thread will have the same fields, we
only detect them once and have one copy of the information.
Core files instead have a LinuxArm64RegisterFlags as a member, because
each core file could have different saved capabilities. The logic from
there is the same but we get HWACP values from the corefile note.
This handler class is Linux specific right now, but it can easily be
made more generic if needed. For example by using LLVM's FeatureBitset
instead of HWCAPs.
Updating register info is done with string comparison, which isn't
ideal. For CPSR, we do know the register number ahead of time but we do
not for other registers in dynamic register sets. So in the interest of
consistency, I'm going to use string comparison for all registers
including cpsr.
I've added tests with a core file and live process. Only checking for
fields that are always present to account for CPU variance.
This patch enforces that every scripted object implements all the
necessary abstract methods.
Every scripted affordance language interface can implement a list of
abstract methods name that checked when the object is instanciated.
Since some scripting affordances implementations can be derived from
template base classes, we can't check the object dictionary since it
will contain the definition of the base class, so instead, this checks
the scripting class dictionary.
Previously, for the various python interfaces, we used
`ABC.abstractmethod` decorators but this is too language specific and
doesn't work for scripting affordances that are not derived from
template base classes (i.e OperatingSystem, ScriptedThreadPlan, ...), so
this patch provides generic/language-agnostic checks for every scripted
affordance.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch enforces that every scripted object implements all the
necessary abstract methods.
Every scripted affordance language interface can implement a list of
abstract methods name that checked when the object is instanciated.
Since some scripting affordances implementations can be derived from
template base classes, we can't check the object dictionary since it
will contain the definition of the base class, so instead, this checks
the scripting class dictionary.
Previously, for the various python interfaces, we used
`ABC.abstractmethod` decorators but this is too language specific and
doesn't work for scripting affordances that are not derived from
template base classes (i.e OperatingSystem, ScriptedThreadPlan, ...), so
this patch provides generic/language-agnostic checks for every scripted
affordance.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
BreakpointResolver::CreateFromStructuredData returns a
BreakpointResolverSP, but all of the subclasses return raw pointers.
Instead of creating a raw pointer and shoving it into a shared pointer,
it seems reasonable to just create the shared pointer directly.
This patch makes the various Scripted Interface base class abstract by
making the `CreatePluginObject` method pure virtual.
This means that we cannot construct a Scripted Interface base class
instance, so this patch also updates the various
`ScriptedInterpreter::CreateScripted*Interface` methods to return a
`nullptr` instead.`
This patch also removes the `ScriptedPlatformInterface` member from the
`ScriptInterpreter` class since it the interpreter can be owned by the
`ScriptedPlatform` instance itself, like we do for `ScriptedProcess`
objects.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This removes AArch64 specific code from the GDB* classes.
To do this I've added 2 new methods to Architecture:
* RegisterWriteCausesReconfigure to check if what you are about to do
will trash the register info.
* ReconfigureRegisterInfo to do the reconfiguring. This tells you if
anything changed so that we only invalidate registers when needed.
So that ProcessGDBRemote can call ReconfigureRegisterInfo in
SetThreadStopInfo,
I've added forwarding calls to GDBRemoteRegisterContext and the base
class
RegisterContext.
(which removes a slightly sketchy static cast as well)
RegisterContext defaults to doing nothing for both the methods
so anything other than GDBRemoteRegisterContext will do nothing.
This completes the conversion of LocateSymbolFile into a SymbolLocator
plugin. The only remaining function is DownloadSymbolFileAsync which
doesn't really fit into the plugin model, and therefore moves into the
SymbolLocator class, while still relying on the plugins to do the
underlying work.
This builds on top of the work started in c3a302d to convert
LocateSymbolFile to a SymbolLocator plugin. This commit moves
DownloadObjectAndSymbolFile.
