Occasionally, during test teardown, LLDB writes to a closed pipe.
Sometimes the communication is inherently unreliable, so LLDB tries to
avoid being killed due to SIGPIPE (it calls `signal(SIGPIPE, SIG_IGN)`).
However, LLVM's default SIGPIPE behavior overrides LLDB's, causing it to
exit with IO_ERR.
Opt LLDB out of the default SIGPIPE behavior. I expect that this will
resolve some LLDB test suite flakiness (tests randomly failing with
IO_ERR) that we've seen since r344372.
rdar://55750240
Differential Revision: https://reviews.llvm.org/D69148
llvm-svn: 375288
This avoids the currently MSVC specific codepath of using the
wchar entry point and converting that to utf8.
Differential Revision: https://reviews.llvm.org/D68770
llvm-svn: 374526
We were checking OPT_no_use_colors three times, twice to disable colors
and once to enable debug mode. This simplifies things and now the option
is only checked once.
llvm-svn: 370814
Summary:
After rL368069 I noticed that HAVE_SYS_TYPES_H is not defined in
Platform.h, or anywhere else in lldb. This change fixes that.
Reviewers: labath
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D65822
llvm-svn: 368125
Summary:
Windows requires re-setting the signal handler each time it is used
and thus ctrl-c was not behaving properly on Windows
Reviewers: jfb
Differential Revision: https://reviews.llvm.org/D64046
llvm-svn: 365868
Summary:
Modify the way LLDB.framework tools are collected. This allows for better fine-tuning of the install behavior downstream. Each target calls `lldb_add_to_framework()` individually. When entering the function, the target exists and we can tweak its very own post-build and install steps. This was not possible with the old `LLDB_FRAMEWORK_TOOLS` approach.
No function change otherwise.
This is a reduced follow-up from the proposal in D61952.
Reviewers: xiaobai, compnerd, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: clayborg, friss, ki.stfu, mgorny, lldb-commits, labath, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62472
llvm-svn: 361946
The driver passes by reference an uninitialized num_errors variable to
RunCommandInterpreter. This should be fine, as it's supposed to be
an output argument, but the reproducer instrumentation reads it in order
to record the value of all the arguments to the function.
This change fixes it by initializing num_errors to 0 before calling
RunCommandInterpreter.
llvm-svn: 361444
This patch adds a command line flag that allows lldb to load local
lldbinit files.
Differential revision: https://reviews.llvm.org/D61578
llvm-svn: 360172
Currently we have special handling for local lldbinit files in the
driver. At the same time, we have an SB API named
`SourceInitFileInCurrentWorkingDirectory` that does the same thing.
This patch removes the special handling from the driver and uses the API
instead. In addition to the obvious advantages of having one canonical
way of doing things and removing code duplication, this change also
means that the code path is the same for global and local lldb init
files.
Differential revision: https://reviews.llvm.org/D61577
llvm-svn: 360077
Remove unused from the driver class. I noticed a bunch of small thing
while doing this that didn't warrant separate commits, so I've lumped
them together into this patch.
llvm-svn: 359355
Spotted some problems in the Driver's PrepareCommandsForSourcing while
helping a colleague track another problem.
1. One error case was not handled because there was no else clause.
Fixed by switching to llvm's early-out style instead of nested
`if (succes) { } else { }` cases. This keeps error handling close
to the actual error.
2. One call-site failed to call the clean-up function. I solved this
by simplifying the API. PrepareCommandsForSourcing no longer requires
the caller to provide a buffer for the pipe's file descriptors and to
call a separate clean-up function later. PrepareCommandsForSourcing
now ensures the file descriptors are handled before returning.
(The read end of the pipe is held open by the returned FILE * as
before.)
I also eliminated an unnecessary local, shorted the lifetime of another,
and tried to improve the comments.
I wrapped the call to open the pipe to get the `#ifdef`s out of the
mainline. I replaced the `close`/`_close` calls with a platform-neutral
helper from `llvm::sys` for the same reason. Per discussion on the
review, I'm leaving the `fdopen` call to use the spelling that Windows
has officially deprecated because it still works it avoids more `#ifdef`s.
Differential Revision: https://reviews.llvm.org/D60152
llvm-svn: 357626
At the moment when --repl is passed to lldb it silently ignores any
commands passed via the options below:
--one-line-before-file <command>
Tells the debugger to execute this one-line lldb command before any file provided on the command line has been loaded.
--one-line <command>
Tells the debugger to execute this one-line lldb command after any file provided on the command line has been loaded.
--source-before-file <file>
Tells the debugger to read in and execute the lldb commands in the given file, before any file has been loaded.
--source <file>
Tells the debugger to read in and execute the lldb commands in the given file, after any file has been loaded.
-O <value> Alias for --one-line-before-file
-o <value> Alias for --one-line
-S <value> Alias for --source-before-file
-s <value> Alias for --source
The -O and -S options are quite useful when writing tests for the REPL
though, e.g. to change settings prior to entering REPL mode. This
patch updates the driver to still respect the commands supplied via -O
and -S when passing --repl instead of silently ignoring them. As -s
and -o don't really make sense in REPL mode, commands supplied via
those options are still ignored, but the driver now emits a warning to
make that clear to the user.
Patch by Nathan Hawes!
Differential Revision: https://reviews.llvm.org/D59681
llvm-svn: 356911
Tablegen doesn't support options that are both flags and take values as
an argument. I noticed this when doing the tablegen rewrite, but forgot
that that affected the reproducer --capture flag.
This patch makes --capture a flag and adds --capture-path to specify a
path for the reproducer. In reality I expect this to be mostly used for
testing, but it could be useful nonetheless.
Differential revision: https://reviews.llvm.org/D59238
llvm-svn: 355936
Now that the LLDB instrumentation macros are in place, we should use
that to test reproducer replay.
Differential revision: https://reviews.llvm.org/D58565
llvm-svn: 355470
As per the discussion on the mailing list:
http://lists.llvm.org/pipermail/lldb-commits/Week-of-Mon-20190218/048007.html
This commit implements option (3):
> Go back to initializing the reproducer before the rest of the debugger.
> The method wouldn't be instrumented and guarantee no other SB methods are
> called or SB objects are constructed. The initialization then becomes part
> of the replay.
Differential revision: https://reviews.llvm.org/D58410
llvm-svn: 354631
GetIndexForObjectImpl generated a bunch of "conversion casts away
constness warnings". Change the function to use "const void *" (and
static_cast, while I'm at it), to avoid this.
Driver.cpp: unused variable "replay" (this was actually caused by a
subsequent partial revert of this patch). I just finish the revert by
removing the variable completely.
llvm-svn: 353405
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
If we build LLDB.framework, dependant tools need appropriate RPATHs in both locations, the build-tree (for testing) and the install-tree (for deployment). Luckily, CMake can handle it for us: https://gitlab.kitware.com/cmake/community/wikis/doc/cmake/RPATH-handling.
* In the build-tree, tools use the absolute path to the framework's actual output location.
* In the install-tree, tools get a list of RPATHs to look for the framework when deployed.
`LLDB_FRAMEWORK_INSTALL_DIR` is added to the `CMAKE_INSTALL_PREFIX` to change the relative location of LLDB.framework in the install-tree.
If it is not empty, it will be added as an additional RPATH to all dependant tools (so they are functional in the install-tree).
If it is empty, LLDB.framework goes to the root and tools will not be functional in the directory structure of the LLVM install-tree.
For historical reasons `LLDB_FRAMEWORK_INSTALL_DIR` defaults to "Library/Frameworks".
Reviewers: xiaobai, JDevlieghere, aprantl, clayborg
Reviewed By: JDevlieghere
Subscribers: ki.stfu, mgorny, lldb-commits, #lldb
Differential Revision: https://reviews.llvm.org/D55330
llvm-svn: 350392
Summary:
Add features to LLDB CMake builds that have so far only been available in Xcode. Clean up a few inconveniences and prepare further improvements.
Options:
* `LLDB_FRAMEWORK_BUILD_DIR` determines target directory (in build-tree)
* `LLDB_FRAMEWORK_INSTALL_DIR` **only** determines target directory in install-tree
* `LLVM_EXTERNALIZE_DEBUGINFO` allows externalized debug info (dSYM on Darwin, emitted to `bin`)
* `LLDB_FRAMEWORK_TOOLS` determines which executables will be copied to the framework's Resources (dropped symlinking, removed INCLUDE_IN_SUITE, removed dummy targets)
Other changes:
* clean up `add_lldb_executable()`
* include `LLDBFramework.cmake` from `source/API/CMakeLists.txt`
* use `*.plist.in` files, which are typical for CMake and independent from Xcode
* add clang headers to the framework bundle
Reviewers: xiaobai, JDevlieghere, aprantl, davide, beanz, stella.stamenova, clayborg, labath
Reviewed By: aprantl
Subscribers: friss, mgorny, lldb-commits, #lldb
Differential Revision: https://reviews.llvm.org/D55328
llvm-svn: 350391
The --repl option was incorrectly defined as "Separate" (option and
value separated by a space). This resulted in the option not being
picked up when no value was specified.
This patch fixes the driver so that `--repl` is recognized again. I
split the option into two:
- A flag: `--repl` and `-r` which take no arguments.
- A joined option: `--repl=<flags>` and `-r=<flags>` that forward its
values to the repl.
This should match the driver's old behavior.
llvm-svn: 349371
Hopefully this makes the option data easier to understand and maintain.
- Group the member variables.
- Do the initialization in the header as it's less error prone.
- Rename the Clean method. It was called only once and was
re-initializing some but not all (?) members. The only useful thing it
does is dealing with the local lldbinit file so keep that and make the
name reflect that.
llvm-svn: 348894
This patch changes the way the reproducer is initialized. Rather than
making changes at run time we now do everything at initialization time.
To make this happen we had to introduce initializer options and their SB
variant. This allows us to tell the initializer that we're running in
reproducer capture/replay mode.
Because of this change we also had to alter our testing strategy. We
cannot reinitialize LLDB when using the dotest infrastructure. Instead
we use lit and invoke two instances of the driver.
Another consequence is that we can no longer enable capture or replay
through commands. This was bound to go away form the beginning, but I
had something in mind where you could enable/disable specific providers.
However this seems like it adds very little value right now so the
corresponding commands were removed.
Finally this change also means you now have to control this through the
driver, for which I replaced --reproducer with --capture and --replay to
differentiate between the two modes.
Differential revision: https://reviews.llvm.org/D55038
llvm-svn: 348152
The changed order of includes caused compile errors on MSVC due to
snprintf macro definition. snprintf should available since VS2015, and
the rest of the code seems to be able to use snprintf just fine without
this macro, so this removes it from the lldb driver as well.
llvm-svn: 347855
They are not needed now that we use LLVMOption for command-line parsing
thank you, Jonas). This also allows us to avoid linking of lldbHost
into the driver which was breaking liblldb encapsulation.
(Technically, there is still a lldb/Host/windows/windows.h include which
is needed on windows, but this is a header-only wrapper for <windows.h>,
so it is not necessary to link lldbHost for that. But ideally, that
should go away too.)
llvm-svn: 347846
Because the optarg variable was shadowed we didn't notice we weren't
extracting the value from the option. This patch fixes that and renames
the variable to prevent this from happening in the future.
I also added two tests to check the error output for --core and --file
when the given value doesn't exist.
llvm-svn: 347821
When I landed the initial reproducer framework I knew there were some
things that needed improvement. Rather than bundling it with a patch
that adds more functionality I split it off into this patch. I also
think the API is stable enough to add unit testing, which is included in
this patch as well.
Other improvements include:
- Refactor how we initialize the loader and generator.
- Improve naming consistency: capture and replay seems the least ambiguous.
- Index providers by name and make sure there's only one of each.
- Add convenience methods for creating and accessing providers.
Differential revision: https://reviews.llvm.org/D54616
llvm-svn: 347716
This patch modifies the lldb driver to use libOption for option parsing.
It allows us to decouple option parsing from option processing which is
important when arguments affect initialization. This was previously not
possible because the debugger need to be initialized as some option
interpretation (like the scripting language etc) was handled by the
debugger, rather than in the driver.
Differential revision: https://reviews.llvm.org/D54692
llvm-svn: 347709
was added as a part of D52604 / r343348. If the
lldb driver is run without any arguments, .lldbinit
file reading was not enabled.
<rdar://problem/45570242>
llvm-svn: 345422
Summary:
Currently, if you build lldb-framework the entire framework doesn't
actually build. In order to build the entire framework, you need to actually
build lldb-suite. This abstraction doesn't feel quite right because
lldb-framework truly does depend on lldb-suite (liblldb + related tools).
In this change I want to invert their dependency. This will mean that lldb and
finish_swig will depend on lldb-framework in a framework build, and lldb-suite
otherwise. Instead of adding conditional logic everywhere to handle this, I
introduce LLDB_SUITE_TARGET to handle it.
Differential Revision: https://reviews.llvm.org/D49406
llvm-svn: 337311
We used to have a pretty stack trace printer in SystemInitializerCommon.
This was disabled on Apple because we didn't want the library to be
setting signal handlers, as this was causing issues when loaded into
Xcode. However, I think it's useful to have this for the LLDB driver, so
I moved it up to use the PrettyStackTraceProgram in the driver's main.
Differential revision: https://reviews.llvm.org/D49377
llvm-svn: 337261
Summary:
This patch adds the possibility to specify an exit code when calling quit.
We accept any int, even though it depends on the user what happens if the int is
out of the range of what the operating system supports as exit codes.
Fixes rdar://problem/38452312
Reviewers: davide, jingham, clayborg
Reviewed By: jingham
Subscribers: clayborg, jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D48659
llvm-svn: 336824
Summary:
In this patch I aim to do the following:
1) Create an lldb-framework target that acts as the target that handles generating LLDB.framework. Previously, liblldb acted as the target for generating the framework in addition to generating the actual lldb library. This made the target feel overloaded.
2) Centralize framework generation as much as it makes sense to do so.
3) Create a target lldb-suite, which depends on every tool and library that makes liblldb fully functional. One result of having this target is it makes tracking dependencies much clearer.
Differential Revision: https://reviews.llvm.org/D48060
llvm-svn: 334968
Summary:
r316368 broke this build when it introduced a reference to a pthread
function to the Utility module. This caused cmake to generate an
incorrect link line (wrong order of libs) because it did not see the
dependency from Utility to the system libraries. Instead these libraries
were being manually added to each final target.
This changes moves the dependency management from the individual targets
to the lldbUtility module, which is consistent with how llvm does it.
The final targets will pick up these libraries as they will be a part of
the link interface of the module.
Technically, some of these dependencies could go into the host module,
as that's where most of the os-specific code is, but I did not try to
investigate which ones.
Reviewers: zturner, sylvestre.ledru
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D39246
llvm-svn: 316997
1. Fix a data race (g_interrupt_sent flag usage was not thread safe, signals
can be handled on arbitrary threads)
2. exit() is not signal-safe, replaced it with the signal-safe equivalent
_exit()
(This differs from the patch on Phabrictor because I had to add
`#include <atomic>` to get the definition of `std::atomic_flag`.)
patch by lemo
Differential Revision: https://reviews.llvm.org/D37926
llvm-svn: 313785
