There are set of classes in Target that describe the parameters of a
process - e.g. it's PID, name, user id, and similar. However, since it
is a bare description of a process and contains no actual functionality,
there's nothing specifically that makes this appropriate for being in
Target -- it could just as well be describing a process on the host, or
some hypothetical virtual process that doesn't even exist.
To cement this, I'm moving these classes to Utility. It's possible that
we can find a better place for it in the future, but as it is neither
Host specific nor Target specific, Utility seems like the most appropriate
place for the time being.
After this there is only 2 remaining references to Target from Host,
which I'll address in a followup.
Differential Revision: https://reviews.llvm.org/D58842
llvm-svn: 355342
Summary:
The current install-clang-headers target installs clang's resource
directory headers. This is different from the install-llvm-headers
target, which installs LLVM's API headers. We want to introduce the
corresponding target to clang, and the natural name for that new target
would be install-clang-headers. Rename the existing target to
install-clang-resource-headers to free up the install-clang-headers name
for the new target, following the discussion on cfe-dev [1].
I didn't find any bots on zorg referencing install-clang-headers. I'll
send out another PSA to cfe-dev to accompany this rename.
[1] http://lists.llvm.org/pipermail/cfe-dev/2019-February/061365.html
Reviewers: beanz, phosek, tstellar, rnk, dim, serge-sans-paille
Subscribers: mgorny, javed.absar, jdoerfert, #sanitizers, openmp-commits, lldb-commits, cfe-commits, llvm-commits
Tags: #clang, #sanitizers, #lldb, #openmp, #llvm
Differential Revision: https://reviews.llvm.org/D58791
llvm-svn: 355340
This patch adds the necessary logic to capture and replay commands
entered into the command interpreter. A DataRecorder shadows the input
and writes its data to a know file. During replay this file is used as
the command interpreter's input.
It's possible to the command interpreter more than once, with a
different input source. We support this scenario by using multiple
buffers. The synchronization for this takes place at the SB layer, where
we create a new recorder every time the debugger input is changed.
During replay we use the corresponding buffer as input.
Differential revision: https://reviews.llvm.org/D58564
llvm-svn: 355249
Summary:
The clang headers are useful when dealing with clang modules. There is also a
way to get to the clang headers from the SB API so it would be nice if they were
also available when we just build lldb.
Differential Revision: https://reviews.llvm.org/D58793
llvm-svn: 355149
As per the discussion on the mailing list:
http://lists.llvm.org/pipermail/lldb-commits/Week-of-Mon-20190218/048007.html
This commit implements option (3):
> Go back to initializing the reproducer before the rest of the debugger.
> The method wouldn't be instrumented and guarantee no other SB methods are
> called or SB objects are constructed. The initialization then becomes part
> of the replay.
Differential revision: https://reviews.llvm.org/D58410
llvm-svn: 354631
The `ap` suffix is a remnant of lldb's former use of auto pointers,
before they got deprecated. Although all their uses were replaced by
unique pointers, some variables still carried the suffix.
In r353795 I removed another auto_ptr remnant, namely redundant calls to
::get for unique_pointers. Jim justly noted that this is a good
opportunity to clean up the variable names as well.
I went over all the changes to ensure my find-and-replace didn't have
any undesired side-effects. I hope I didn't miss any, but if you end up
at this commit doing a git blame on a weirdly named variable, please
know that the change was unintentional.
llvm-svn: 353912
Unlike std::make_unique, which is only available since C++14,
std::make_shared is available since C++11. Not only is std::make_shared
a lot more readable compared to ::reset(new), it also performs a single
heap allocation for the object and control block.
Differential revision: https://reviews.llvm.org/D57990
llvm-svn: 353764
Summary:
This patch adds support of expression evaluation in a context of some object.
Consider the following example:
```
struct S {
int a = 11;
int b = 12;
};
int main() {
S s;
int a = 1;
int b = 2;
// We have stopped here
return 0;
}
```
This patch allows to do something like that:
```
lldb.frame.FindVariable("s").EvaluateExpression("a + b")
```
and the result will be `33` (not `3`) because fields `a` and `b` of `s` will be
used (not locals `a` and `b`).
This is achieved by replacing of `this` type and object for the expression. This
has some limitations: an expression can be evaluated only for values located in
the debuggee process memory (they must have an address of `eAddressTypeLoad`
type).
Reviewers: teemperor, clayborg, jingham, zturner, labath, davide, spyffe, serge-sans-paille
Reviewed By: jingham
Subscribers: abidh, lldb-commits, leonid.mashinskiy
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D55318
llvm-svn: 353149
Summary:
These classes describe the details of the process we are about to
launch, and so they are naturally used by the launching code in the Host
module. Previously they were present in Target because that is the most
important (but by far not the only) user of the launching code.
Since the launching code has other customers, must of which do not care
about Targets, it makes sense to move these classes to the Host layer,
next to the launching code.
This move reduces the number of times that Target is included from host
to 8 (it used to be 14).
Reviewers: zturner, clayborg, jingham, davide, teemperor
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D56602
llvm-svn: 353047
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
The code in LLDB assumes that CompilerType and friends use the size 0
as a sentinel value to signal an error. This works for C++, where no
zero-sized type exists, but in many other programming languages
(including I believe C) types of size zero are possible and even
common. This is a particular pain point in swift-lldb, where extra
code exists to double-check that a type is *really* of size zero and
not an error at various locations.
To remedy this situation, this patch starts by converting
CompilerType::getBitSize() and getByteSize() to return an optional
result. To avoid wasting space, I hand-rolled my own optional data
type assuming that no type is larger than what fits into 63
bits. Follow-up patches would make similar changes to the ValueObject
hierarchy.
rdar://problem/47178964
Differential Revision: https://reviews.llvm.org/D56688
llvm-svn: 351214
This parameter was only ever used with the Module set, and
since a SymbolFile is tied to a module, the parameter turns
out to be entirely unnecessary. Furthermore, it doesn't make
a lot of sense to ask a caller to ask SymbolFile which is tied
to Module X to find types for Module Y, but that possibility
was open with the previous interface. By removing this
parameter from the API, it makes it harder to use incorrectly
as well as easier for an implementor to understand what it
needs to do.
llvm-svn: 351133
Summary:
This commit adds the glue code necessary to integrate the
SymbolFileBreakpad into the plugin system. Most of the methods are
stubbed out. The only method implemented method is AddSymbols, which
parses the PUBLIC "section" of the breakpad "object file", and fills out
the Module's symtab.
To enable testing this, I've made two additional changes:
- dump Symtab from the SymbolVendor class. The symtab was already being
dumped as a part of the object file dump, but that happened before
symbol vendor kicked in, so it did not reflect any symbols added
there.
- add ability to explicitly specify the external symbol file in
lldb-test (so that the object file could be linked with the breakpad
symbol file). To make things simpler, I've changed lldb-test from
consuming multiple inputs (and dumping their symbols) to having it
just process a single file per invocation. This was not a problem
since everyone was using it that way already.
Reviewers: clayborg, zturner, lemo, markmentovai, amccarth
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D56173
llvm-svn: 350924
Summary:
Simplify SWIG invocation and handling of generated files.
The `swig_wrapper` target can generate `LLDBWrapPython.cpp` and `lldb.py` in its own binary directory, so we can get rid of a few global variables and their logic. We can use the swig_wrapper's BINARY_DIR target property to refer to it and liblldb's LIBRARY_OUTPUT_DIRECTORY to refer to the framework/shared object output directory.
Reviewers: JDevlieghere, aprantl, stella.stamenova, beanz, zturner, xiaobai
Reviewed By: aprantl
Subscribers: mgorny, lldb-commits, #lldb
Differential Revision: https://reviews.llvm.org/D55332
llvm-svn: 350393
Summary:
Add features to LLDB CMake builds that have so far only been available in Xcode. Clean up a few inconveniences and prepare further improvements.
Options:
* `LLDB_FRAMEWORK_BUILD_DIR` determines target directory (in build-tree)
* `LLDB_FRAMEWORK_INSTALL_DIR` **only** determines target directory in install-tree
* `LLVM_EXTERNALIZE_DEBUGINFO` allows externalized debug info (dSYM on Darwin, emitted to `bin`)
* `LLDB_FRAMEWORK_TOOLS` determines which executables will be copied to the framework's Resources (dropped symlinking, removed INCLUDE_IN_SUITE, removed dummy targets)
Other changes:
* clean up `add_lldb_executable()`
* include `LLDBFramework.cmake` from `source/API/CMakeLists.txt`
* use `*.plist.in` files, which are typical for CMake and independent from Xcode
* add clang headers to the framework bundle
Reviewers: xiaobai, JDevlieghere, aprantl, davide, beanz, stella.stamenova, clayborg, labath
Reviewed By: aprantl
Subscribers: friss, mgorny, lldb-commits, #lldb
Differential Revision: https://reviews.llvm.org/D55328
llvm-svn: 350391
This builds on https://reviews.llvm.org/D43884 and https://reviews.llvm.org/D43886 and extends LLDB support of Obj-C exceptions to also look for a "current exception" for a thread in the C++ exception handling runtime metadata (via call to __cxa_current_exception_type). We also construct an actual historical SBThread/ThreadSP that contains frames from the backtrace in the Obj-C exception object.
The high level goal this achieves is that when we're already crashed (because an unhandled exception occurred), we can still access the exception object and retrieve the backtrace from the throw point. In Obj-C, this is particularly useful because a catch+rethrow is very common and in those cases you currently don't have any access to the throw point backtrace.
Differential Revision: https://reviews.llvm.org/D44072
llvm-svn: 349718
This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:
run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD
Differential revision: https://reviews.llvm.org/D55584
llvm-svn: 349215
Summary:
These are general purpose "utility" classes, whose functionality is not
debugger-specific in any way. As such, I believe they belong in the
Utility module.
This doesn't break any particular dependency (yet), but it reduces the
number of Core dependencies across the board.
Reviewers: zturner, jingham, teemperor, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D55361
llvm-svn: 349157
Summary:
This function was named such because in the case of MachO files, the
mach header is located at this address. However all (most?) usages of
this function were not interested in that fact, but the fact that this
address is used as the base address for expressing various relative
addresses in the object file.
For other object file formats, this name is not appropriate (and it's
probably the reason why this function was not implemented in these
classes). In the ELF case the ELF header will usually end up at this
address, but this is a result of the linker optimizing the file layout
and not a requirement of the spec. For COFF files, I believe the is no
header located at this address either.
Reviewers: clayborg, jasonmolenda, amccarth, lemo, stella.stamenova
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D55422
llvm-svn: 348849
This re-commits r348592, which was reverted due to a failing test on
macos.
The issue was that I was passing a null pointer for the
"CreateMemoryInstance" callback when registering ObjectFileBreakpad,
which caused crashes when attemping to load modules from memory. The
correct thing to do is to pass a callback which always returns a null
pointer (as breakpad files are never loaded in inferior memory).
It turns out that there is only one test which exercises this code path,
and it's mac-only, so I've create a new test which should run everywhere
(except windows, as one cannot delete an executable which is being run).
Unfortunately, this test still fails on linux for other reasons, but at
least it gives us something to aim for.
The original commit message was:
This patch adds the scaffolding necessary for lldb to recognise symbol
files generated by breakpad. These (textual) files contain just enough
information to be able to produce a backtrace from a crash
dump. This information includes:
- UUID, architecture and name of the module
- line tables
- list of symbols
- unwind information
A minimal breakpad file could look like this:
MODULE Linux x86_64 0000000024B5D199F0F766FFFFFF5DC30 a.out
INFO CODE_ID 00000000B52499D1F0F766FFFFFF5DC3
FILE 0 /tmp/a.c
FUNC 1010 10 0 _start
1010 4 4 0
1014 5 5 0
1019 5 6 0
101e 2 7 0
PUBLIC 1010 0 _start
STACK CFI INIT 1010 10 .cfa: $rsp 8 + .ra: .cfa -8 + ^
STACK CFI 1011 $rbp: .cfa -16 + ^ .cfa: $rsp 16 +
STACK CFI 1014 .cfa: $rbp 16 +
Even though this data would normally be considered "symbol" information,
in the current lldb infrastructure it is assumed every SymbolFile object
is backed by an ObjectFile instance. So, in order to better interoperate
with the rest of the code (particularly symbol vendors).
In this patch I just parse the breakpad header, which is enough to
populate the UUID and architecture fields of the ObjectFile interface.
The rough plan for followup patches is to expose the individual parts of
the breakpad file as ObjectFile "sections", which can then be used by
other parts of the codebase (SymbolFileBreakpad ?) to vend the necessary
information.
Reviewers: clayborg, zturner, lemo, amccarth
Subscribers: mgorny, fedor.sergeev, markmentovai, lldb-commits
Differential Revision: https://reviews.llvm.org/D55214
llvm-svn: 348773
Summary:
This patch adds the scaffolding necessary for lldb to recognise symbol
files generated by breakpad. These (textual) files contain just enough
information to be able to produce a backtrace from a crash
dump. This information includes:
- UUID, architecture and name of the module
- line tables
- list of symbols
- unwind information
A minimal breakpad file could look like this:
MODULE Linux x86_64 0000000024B5D199F0F766FFFFFF5DC30 a.out
INFO CODE_ID 00000000B52499D1F0F766FFFFFF5DC3
FILE 0 /tmp/a.c
FUNC 1010 10 0 _start
1010 4 4 0
1014 5 5 0
1019 5 6 0
101e 2 7 0
PUBLIC 1010 0 _start
STACK CFI INIT 1010 10 .cfa: $rsp 8 + .ra: .cfa -8 + ^
STACK CFI 1011 $rbp: .cfa -16 + ^ .cfa: $rsp 16 +
STACK CFI 1014 .cfa: $rbp 16 +
Even though this data would normally be considered "symbol" information,
in the current lldb infrastructure it is assumed every SymbolFile object
is backed by an ObjectFile instance. So, in order to better interoperate
with the rest of the code (particularly symbol vendors).
In this patch I just parse the breakpad header, which is enough to
populate the UUID and architecture fields of the ObjectFile interface.
The rough plan for followup patches is to expose the individual parts of
the breakpad file as ObjectFile "sections", which can then be used by
other parts of the codebase (SymbolFileBreakpad ?) to vend the necessary
information.
Reviewers: clayborg, zturner, lemo, amccarth
Subscribers: mgorny, fedor.sergeev, markmentovai, lldb-commits
Differential Revision: https://reviews.llvm.org/D55214
llvm-svn: 348592
This patch changes the way the reproducer is initialized. Rather than
making changes at run time we now do everything at initialization time.
To make this happen we had to introduce initializer options and their SB
variant. This allows us to tell the initializer that we're running in
reproducer capture/replay mode.
Because of this change we also had to alter our testing strategy. We
cannot reinitialize LLDB when using the dotest infrastructure. Instead
we use lit and invoke two instances of the driver.
Another consequence is that we can no longer enable capture or replay
through commands. This was bound to go away form the beginning, but I
had something in mind where you could enable/disable specific providers.
However this seems like it adds very little value right now so the
corresponding commands were removed.
Finally this change also means you now have to control this through the
driver, for which I replaced --reproducer with --capture and --replay to
differentiate between the two modes.
Differential revision: https://reviews.llvm.org/D55038
llvm-svn: 348152
Summary:
This patch fixes the next situation. On Windows clang-cl makes no stub before
the main function, so the main function is located exactly on module entry
point. May be it is the same on other platforms. So consider the following
sequence:
- set a breakpoint on main and stop there;
- try to evaluate expression, which requires a code execution on the debuggee
side. Such an execution always returns to the module entry, and the plan waits
for it there;
- the plan understands that it is complete now and removes its breakpoint. But
the breakpoint site is still there, because we also have a breakpoint on
entry;
- StopInfo analyzes a situation. It sees that we have stopped on the breakpoint
site, and it sees that the breakpoint site has owners, and no one logical
breakpoint is internal (because the plan is already completed and it have
removed its breakpoint);
- StopInfo thinks that it's a user breakpoint and skips it to avoid recursive
computations;
- the program continues.
So in this situation the program continues without a stop right after
the expression evaluation. To avoid this an additional check that
the plan was completed was added.
Reviewers: jingham, zturner, boris.ulasevich
Reviewed by: jingham
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53761
llvm-svn: 347974
This adds new APIs and a command to deal with exceptions (mostly Obj-C exceptions): SBThread and Thread get GetCurrentException API, which returns an SBValue/ValueObjectSP with the current exception for a thread. "Current" means an exception that is currently being thrown, caught or otherwise processed. In this patch, we only know about the exception when in objc_exception_throw, but subsequent patches will expand this (and add GetCurrentExceptionBacktrace, which will return an SBThread/ThreadSP containing a historical thread backtrace retrieved from the exception object. Currently unimplemented, subsequent patches will implement this).
Extracting the exception from objc_exception_throw is implemented by adding a frame recognizer.
This also add a new sub-command "thread exception", which prints the current exception.
Differential Revision: https://reviews.llvm.org/D43886
llvm-svn: 347813
When I landed the initial reproducer framework I knew there were some
things that needed improvement. Rather than bundling it with a patch
that adds more functionality I split it off into this patch. I also
think the API is stable enough to add unit testing, which is included in
this patch as well.
Other improvements include:
- Refactor how we initialize the loader and generator.
- Improve naming consistency: capture and replay seems the least ambiguous.
- Index providers by name and make sure there's only one of each.
- Add convenience methods for creating and accessing providers.
Differential revision: https://reviews.llvm.org/D54616
llvm-svn: 347716
When debugging read-only memory we cannot use software breakpoint. We
already have support for hardware breakpoints and users can specify them
with `-H`. However, there's no option to force LLDB to use hardware
breakpoints internally, for example while stepping.
This patch adds a setting target.require-hardware-breakpoint that forces
LLDB to always use hardware breakpoints. Because hardware breakpoints
are a limited resource and can fail to resolve, this patch also extends
error handling in thread plans, where breakpoints are used for stepping.
Differential revision: https://reviews.llvm.org/D54221
llvm-svn: 346920
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
This patch removes the comments following the header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
Differential revision: https://reviews.llvm.org/D54385
llvm-svn: 346625
This moves construction of data buffers into the FileSystem class. Like
some of the previous refactorings we don't translate the path yet
because the functionality hasn't been landed in LLVM yet.
Differential revision: https://reviews.llvm.org/D54272
llvm-svn: 346598
Replace calls to LLVM's is_directory with calls to LLDB's FileSytem
class. For this I introduced a new convenience method that, like the
other methods, takes either a path or filespec. This still uses the LLVM
functions under the hood.
Differential revision: https://reviews.llvm.org/D54135
llvm-svn: 346375
In January Davide sent an e-mail to the mailing list to suggest removing
unmaintained language plugins such as Go and Java. The plan was to have
some cool down period to allow users to speak up, however after that the
plugins were never actually removed.
This patch removes the OCaml debugger plugin.
The plugin can be added again in the future if it is mature enough both
in terms of testing and maintenance commitment.
Discussion on the mailing list:
http://lists.llvm.org/pipermail/lldb-dev/2018-January/013171.html
Differential revision: https://reviews.llvm.org/D54060
llvm-svn: 346159
In January Davide sent an e-mail to the mailing list to suggest removing
unmaintained language plugins such as Go and Java. The plan was to have
some cool down period to allow users to speak up, however after that the
plugins were never actually removed.
This patch removes the Java debugger plugin.
The plugin can be added again in the future if it is mature enough both
in terms of testing and maintenance commitment.
Discussion on the mailing list:
http://lists.llvm.org/pipermail/lldb-dev/2018-January/013171.html
Differential revision: https://reviews.llvm.org/D54059
llvm-svn: 346158
In January Davide sent an e-mail to the mailing list to suggest removing
unmaintained language plugins such as Go and Java. The plan was to have
some cool down period to allow users to speak up, however after that the
plugins were never actually removed.
This patch removes the Go debugger plugin.
The plugin can be added again in the future if it is mature enough both
in terms of testing and maintenance commitment.
Discussion on the mailing list:
http://lists.llvm.org/pipermail/lldb-dev/2018-January/013171.html
Differential revision: https://reviews.llvm.org/D54057
llvm-svn: 346157
This patch modifies how we open File instances in LLDB. Rather than
passing a path or FileSpec to the constructor, we now go through the
virtual file system. This is needed in order to make things work with
the VFS in the future.
Differential revision: https://reviews.llvm.org/D54020
llvm-svn: 346049
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
