jami/jami-daemon
1
0
Fork 0
mirror of https://git.jami.net/savoirfairelinux/jami-daemon.git synced 2025-08-12 22:09:25 +08:00
Code Issues Projects Releases Wiki Activity

[#2605] Update to PJSIP 1.5.5

Browse Source
This commit is contained in:
Alexandre Savard
2010-01-26 12:15:29 -05:00
parent 04da22f531
commit 23d2e9189b
330 changed files with 61155 additions and 26438 deletions
Download Patch File Download Diff File Expand all files Collapse all files

427
sflphone-common/libs/pjproject/pjlib/include/pj/sock_qos.h Normal file
View File

@ -0,0 +1,427 @@
/* $Id: sock_qos.h 2967 2009-10-25 10:50:17Z bennylp $ */
/*
* Copyright (C) 2008-2009 Teluu Inc. (http://www.teluu.com)
* Copyright (C) 2003-2008 Benny Prijono <benny@prijono.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __PJ_SOCK_QOS_H__
#define __PJ_SOCK_QOS_H__
/**
* @file sock_qos.h
* @brief Socket QoS API
*/
#include <pj/sock.h>
PJ_BEGIN_DECL
/**
* @defgroup socket_qos Socket Quality of Service (QoS) API: TOS, DSCP, WMM, IEEE 802.1p
* @ingroup PJ_SOCK
* @{
\section intro QoS Technologies
QoS settings are available for both Layer 2 and 3 of TCP/IP protocols:
\subsection intro_ieee8021p Layer 2: IEEE 802.1p for Ethernet
IEEE 802.1p tagging will mark frames sent by a host for prioritized
delivery using a 3-bit Priority field in the virtual local area network
(VLAN) header of the Ethernet frame. The VLAN header is placed inside
the Ethernet header, between the Source Address field and either the
Length field (for an IEEE 802.3 frame) or the EtherType field (for an
Ethernet II frame).
\subsection intro_wmm Layer 2: WMM
At the Network Interface layer for IEEE 802.11 wireless, the Wi-Fi
Alliance certification for Wi-Fi Multimedia (WMM) defines four access
categories for prioritizing network traffic. These access categories
are (in order of highest to lowest priority) voice, video, best-effort,
and background. Host support for WMM prioritization requires that both
wireless network adapters and their drivers support WMM. Wireless
access points (APs) must have WMM enabled.
\subsection intro_dscp Layer 3: DSCP
At the Internet layer, you can use Differentiated Services/Diffserv and
set the value of the Differentiated Services Code Point (DSCP) in the
IP header. As defined in RFC 2474, the DSCP value is the high-order 6 bits
of the IP version 4 (IPv4) TOS field and the IP version 6 (IPv6) Traffic
Class field.
\subsection intro_other Layer 3: Other
Other mechanisms exist (such as RSVP, IntServ) but this will not be
implemented.
\section availability QoS Availability
\subsection linux Linux
DSCP is available via IP TOS option.
Ethernet 802.1p tagging is done by setting setsockopt(SO_PRIORITY) option
of the socket, then with the set_egress_map option of the vconfig utility
to convert this to set vlan-qos field of the packet.
WMM is not known to be available.
\subsection windows Windows and Windows Mobile
(It's a mess!)
DSCP is settable with setsockopt() on Windows 2000 or older, but Windows
would silently ignore this call on WinXP or later, unless administrator
modifies the registry. On Windows 2000, Windows XP, and Windows Server
2003, GQoS (Generic QoS) API is the standard API, but this API may not be
supported in the future. On Vista and Windows 7, the is a new QoS2 API,
also known as Quality Windows Audio-Video Experience (qWAVE).
IEEE 802.1p tagging is available via Traffic Control (TC) API, available
on Windows XP SP2, but this needs administrator access. For Vista and
later, it's in qWAVE.
WMM is available for mobile platforms on Windows Mobile 6 platform and
Windows Embedded CE 6, via setsockopt(IP_DSCP_TRAFFIC_TYPE). qWAVE
supports this as well.
\subsection symbian Symbian S60 3rd Ed
Both DSCP and WMM is supported via RSocket::SetOpt() with will set both
Layer 2 and Layer 3 QoS settings accordingly. Internally, PJLIB sets the
DSCP field of the socket, and based on certain DSCP values mapping,
Symbian will set the WMM tag accordingly.
\section api PJLIB's QoS API Abstraction
Based on the above, the following API is implemented.
Declare the following "standard" traffic types.
\code
typedef enum pj_qos_type
{
PJ_QOS_TYPE_BEST_EFFORT,
PJ_QOS_TYPE_BACKGROUND,
PJ_QOS_TYPE_VIDEO,
PJ_QOS_TYPE_VOICE,
PJ_QOS_TYPE_CONTROL
} pj_qos_type;
\endcode
The traffic classes above will determine how the Layer 2 and 3 QoS
settings will be used. The standard mapping between the classes above
to the corresponding Layer 2 and 3 settings are as follows:
\code
=================================================================
PJLIB Traffic Type IP DSCP WMM 802.1p
-----------------------------------------------------------------
BEST_EFFORT 0x00 BE (Bulk Effort) 0
BACKGROUND 0x08 BK (Bulk) 2
VIDEO 0x28 VI (Video) 5
VOICE 0x30 VO (Voice) 6
CONTROL 0x38 VO (Voice) 7
=================================================================
\endcode
There are two sets of API provided to manipulate the QoS parameters.
\subsection portable_api Portable API
The first set of API is:
\code
// Set QoS parameters
PJ_DECL(pj_status_t) pj_sock_set_qos_type(pj_sock_t sock,
pj_qos_type val);
// Get QoS parameters
PJ_DECL(pj_status_t) pj_sock_get_qos_type(pj_sock_t sock,
pj_qos_type *p_val);
\endcode
The API will set the traffic type according to the DSCP class, for both
Layer 2 and Layer 3 QoS settings, where it's available. If any of the
layer QoS setting is not settable, the API will silently ignore it.
If both layers are not setable, the API will return error.
The API above is the recommended use of QoS, since it is the most
portable across all platforms.
\subsection detail_api Fine Grained Control API
The second set of API is intended for application that wants to fine
tune the QoS parameters.
The Layer 2 and 3 QoS parameters are stored in pj_qos_params structure:
\code
typedef enum pj_qos_flag
{
PJ_QOS_PARAM_HAS_DSCP = 1,
PJ_QOS_PARAM_HAS_SO_PRIO = 2,
PJ_QOS_PARAM_HAS_WMM = 4
} pj_qos_flag;
typedef enum pj_qos_wmm_prio
{
PJ_QOS_WMM_PRIO_BULK_EFFORT,
PJ_QOS_WMM_PRIO_BULK,
PJ_QOS_WMM_PRIO_VIDEO,
PJ_QOS_WMM_PRIO_VOICE
} pj_qos_wmm_prio;
typedef struct pj_qos_params
{
pj_uint8_t flags; // Determines which values to
// set, bitmask of pj_qos_flag
pj_uint8_t dscp_val; // The 6 bits DSCP value to set
pj_uint8_t so_prio; // SO_PRIORITY value
pj_qos_wmm_prio wmm_prio; // WMM priority value
} pj_qos_params;
\endcode
The second set of API with more fine-grained control over the parameters
are:
\code
// Retrieve QoS params for the specified traffic type
PJ_DECL(pj_status_t) pj_qos_get_params(pj_qos_type type,
pj_qos_params *p);
// Set QoS parameters to the socket
PJ_DECL(pj_status_t) pj_sock_set_qos_params(pj_sock_t sock,
const pj_qos_params *p);
// Get QoS parameters from the socket
PJ_DECL(pj_status_t) pj_sock_get_qos_params(pj_sock_t sock,
pj_qos_params *p);
\endcode
Important:
The pj_sock_set/get_qos_params() APIs are not portable, and it's probably
only going to be implemented on Linux. Application should always try to
use pj_sock_set_qos_type() instead.
*/
/**
* High level traffic classification.
*/
typedef enum pj_qos_type
{
PJ_QOS_TYPE_BEST_EFFORT, /**< Best effort traffic (default value).
Any QoS function calls with specifying
this value are effectively no-op */
PJ_QOS_TYPE_BACKGROUND, /**< Background traffic. */
PJ_QOS_TYPE_VIDEO, /**< Video traffic. */
PJ_QOS_TYPE_VOICE, /**< Voice traffic. */
PJ_QOS_TYPE_CONTROL /**< Control traffic. */
} pj_qos_type;
/**
* Bitmask flag to indicate which QoS layer setting is set in the
* \a flags field of the #pj_qos_params structure.
*/
typedef enum pj_qos_flag
{
PJ_QOS_PARAM_HAS_DSCP = 1, /**< DSCP field is set. */
PJ_QOS_PARAM_HAS_SO_PRIO = 2, /**< Socket SO_PRIORITY */
PJ_QOS_PARAM_HAS_WMM = 4 /**< WMM field is set. */
} pj_qos_flag;
/**
* Standard WMM priorities.
*/
typedef enum pj_qos_wmm_prio
{
PJ_QOS_WMM_PRIO_BULK_EFFORT, /**< Bulk effort priority */
PJ_QOS_WMM_PRIO_BULK, /**< Bulk priority. */
PJ_QOS_WMM_PRIO_VIDEO, /**< Video priority */
PJ_QOS_WMM_PRIO_VOICE /**< Voice priority */
} pj_qos_wmm_prio;
/**
* QoS parameters to be set or retrieved to/from the socket.
*/
typedef struct pj_qos_params
{
pj_uint8_t flags; /**< Determines which values to
set, bitmask of pj_qos_flag */
pj_uint8_t dscp_val; /**< The 6 bits DSCP value to set */
pj_uint8_t so_prio; /**< SO_PRIORITY value */
pj_qos_wmm_prio wmm_prio; /**< WMM priority value */
} pj_qos_params;
/**
* This is the high level and portable API to enable QoS on the specified
* socket, by setting the traffic type to the specified parameter.
*
* @param sock The socket.
* @param type Traffic type to be set.
*
* @return PJ_SUCCESS if at least Layer 2 or Layer 3 setting is
* successfully set. If both Layer 2 and Layer 3 settings
* can't be set, this function will return error.
*/
PJ_DECL(pj_status_t) pj_sock_set_qos_type(pj_sock_t sock,
pj_qos_type type);
/**
* This is the high level and portable API to get the traffic type that has
* been set on the socket. On occasions where the Layer 2 or Layer 3 settings
* were modified by using low level API, this function may return approximation
* of the closest QoS type that matches the settings.
*
* @param sock The socket.
* @param p_type Pointer to receive the traffic type of the socket.
*
* @return PJ_SUCCESS if traffic type for the socket can be obtained
* or approximated..
*/
PJ_DECL(pj_status_t) pj_sock_get_qos_type(pj_sock_t sock,
pj_qos_type *p_type);
/**
* This is a convenience function to apply QoS to the socket, and print error
* logging if the operations failed. Both QoS traffic type and the low level
* QoS parameters can be applied with this function.
*
* @param sock The socket handle.
* @param qos_type QoS traffic type. The QoS traffic type will be applied
* only if the value is not PJ_QOS_TYPE_BEST_EFFORT,
* @param qos_params Optional low-level QoS parameters. This will be
* applied only if this argument is not NULL and the
* flags inside the structure is non-zero. Upon return,
* the flags will indicate which parameters have been
* applied successfully.
* @param log_level This function will print to log at this level upon
* encountering errors.
* @param log_sender Optional sender name in the log.
* @param sock_name Optional name to help identify the socket in the log.
*
* @return PJ_SUCCESS if at least Layer 2 or Layer 3 setting is
* successfully set. If both Layer 2 and Layer 3 settings
* can't be set, this function will return error.
*
* @see pj_sock_apply_qos2()
*/
PJ_DECL(pj_status_t) pj_sock_apply_qos(pj_sock_t sock,
pj_qos_type qos_type,
pj_qos_params *qos_params,
unsigned log_level,
const char *log_sender,
const char *sock_name);
/**
* Variant of #pj_sock_apply_qos() where the \a qos_params parameter is
* const.
*
* @see pj_sock_apply_qos()
*/
PJ_DECL(pj_status_t) pj_sock_apply_qos2(pj_sock_t sock,
pj_qos_type qos_type,
const pj_qos_params *qos_params,
unsigned log_level,
const char *log_sender,
const char *sock_name);
/**
* Retrieve the standard mapping of QoS params for the specified traffic
* type.
*
* @param type The traffic type from which the QoS parameters
* are to be retrieved.
* @param p_param Pointer to receive the QoS parameters.
*
* @return PJ_SUCCESS on success or the appropriate error code.
*/
PJ_DECL(pj_status_t) pj_qos_get_params(pj_qos_type type,
pj_qos_params *p_param);
/**
* Retrieve the traffic type that matches the specified QoS parameters.
* If no exact matching is found, this function will return an
* approximation of the closest matching traffic type for the specified
* QoS parameters.
*
* @param param Structure containing QoS parameters to map into
* "standard" traffic types.
* @param p_type Pointer to receive the traffic type.
*
* @return PJ_SUCCESS on success or the appropriate error code.
*/
PJ_DECL(pj_status_t) pj_qos_get_type(const pj_qos_params *param,
pj_qos_type *p_type);
/**
* This is a low level API to set QoS parameters to the socket.
*
* @param sock The socket.
* @param param Structure containing QoS parameters to be applied
* to the socket. Upon return, the \a flags field
* of this structure will be set with bitmask value
* indicating which QoS settings have successfully
* been applied to the socket.
*
* @return PJ_SUCCESS if at least one field setting has been
* successfully set. If no setting can't be set,
* this function will return error.
*/
PJ_DECL(pj_status_t) pj_sock_set_qos_params(pj_sock_t sock,
pj_qos_params *param);
/**
* This is a low level API to get QoS parameters from the socket.
*
* @param sock The socket.
* @param p_param Pointer to receive the parameters. Upon returning
* successfully, the \a flags field of this structure
* will be initialized with the appropriate bitmask
* to indicate which fields have been successfully
* retrieved.
*
* @return PJ_SUCCESS on success or the appropriate error code.
*/
PJ_DECL(pj_status_t) pj_sock_get_qos_params(pj_sock_t sock,
pj_qos_params *p_param);
/**
* @}
*/
PJ_END_DECL
#endif /* __PJ_SOCK_QOS_H__ */