linux-sunxi/u-boot-sunxi
1
0
Fork 0
mirror of https://github.com/linux-sunxi/u-boot-sunxi.git synced 2024-02-12 11:16:03 +08:00
Code Issues Projects Releases Wiki Activity

README.arm-relocation: get relocated address in gdb

Browse Source 
When your emulator is connected at reset (or is used to load u-boot)
it is possible to get the relocation address from the gd->relocaddr
since gd is always in r8 (on ARM) it is addressable before the
gdb has remapped symbols.

Document this alternate method in-line with the original method
written by Heiko Schocher.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Heiko Schocher <hs@denx.de>
CC: Wolfgang Denk <wd@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
This commit is contained in:
Ben Gardiner
2011-04-28 11:03:21 +00:00
committed by Wolfgang Denk
parent f4379ceff0
commit 7124015ada
1 changed files with 8 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
doc/README.arm-relocation
View File

@ -164,6 +164,7 @@ Program received signal SIGSTOP, Stopped (signal).
add-symbol-file u-boot 0x8ff08000 add-symbol-file u-boot 0x8ff08000
^^^^^^^^^^ ^^^^^^^^^^
get this address from u-boot bdinfo command get this address from u-boot bdinfo command
or get it from gd->relocaddr in gdb
=> bdinfo => bdinfo
rch_number = XXXXXXXXXX rch_number = XXXXXXXXXX
@ -182,4 +183,11 @@ irq_sp = XXXXXXXXXX
sp start = XXXXXXXXXX sp start = XXXXXXXXXX
FB base = XXXXXXXXXX FB base = XXXXXXXXXX
or interrupt execution by any means and re-load the symbols at the location
specified by gd->relocaddr -- this is only valid after board_init_f.
(gdb) set $s = gd->relocaddr
(gdb) symbol-file
(gdb) add-symbol-file u-boot $s
Now you can use gdb as usual :-) Now you can use gdb as usual :-)