powerpc/85xx: Add Support for Freescale P1010 Processor

Key Features include of the P1010:
* e500v2 core frequency operation of 500 to 800 MHz
* Power consumption less than 5.0 W at 800 MHz core speed
* Dual SATA 3 Gbps controllers with integrated PHY
* Dual PCI Express controllers
* Three 10/100/1000 Mbps enhanced triple-speed Ethernet controllers (eTSECs)
	* TCP/IP acceleration and classification capabilities
	* IEEE 1588 support
	* Lossless flow control
	* RGMII, SGMII
* DDR3 with support for a 32-bit data interface (40 bits including ECC),
  up to 800 MHz data rate 32/16-bit DDR3 memory controller
* Dedicated security engine featuring trusted boot
* TDM interface
* Dual controller area networks (FlexCAN) controller
* SD/MMC card controller supporting booting from Flash cards
* USB 2.0 host and device controller with an on-chip, high-speed PHY
* Integrated Flash controller (IFC)
* Power Management Controller (PMC)
* Four-channel, general-purpose DMA controller
* I2C controller
* Serial peripheral interface (SPI) controller with master and slave support
* System timers including a periodic interrupt timer, real-time clock,
  software watchdog timer, and four general-purpose timers
* Dual DUARTs

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Poonam Aggrwal
2011-01-13 21:39:27 +05:30
committed by Kumar Gala
parent 17028be238
commit b8cdd01462
5 changed files with 13 additions and 5 deletions

View File

@ -1,5 +1,5 @@
/*
* Copyright 2009-2010 Freescale Semiconductor, Inc.
* Copyright 2009-2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@ -69,14 +69,16 @@
/* Enable TSEC2.0 for the platforms that have it if we are using TSEC */
#if defined(CONFIG_TSEC_ENET) && \
(defined(CONFIG_P1020) || defined(CONFIG_P1011))
(defined(CONFIG_P1010) || \
defined(CONFIG_P1020) || defined(CONFIG_P1011))
#define CONFIG_TSECV2
#endif
/*
* SEC (crypto unit) major compatible version determination
*/
#if defined(CONFIG_FSL_CORENET)
#if defined(CONFIG_FSL_CORENET) || \
defined(CONFIG_P1010)
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#elif defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx)
#define CONFIG_SYS_FSL_SEC_COMPAT 2