linux-sunxi/u-boot-sunxi
1
0
Fork 0
mirror of https://github.com/linux-sunxi/u-boot-sunxi.git synced 2024-02-12 11:16:03 +08:00
Code Issues Projects Releases Wiki Activity

Enabled support for Rev 1.3 SPD for DDR2 DIMMs

Browse Source 
SPD has minor change from Rev 1.2 to 1.3. This patch enables Rev 1.3.
The difference has ben examined and the code is compatible.
Speed bins is not verified on hardware for CL7 at this moment.

This patch also enables SPD Rev 1.x where x is up to "F". According to SPD
spec, the lower nibble is optionally used to determine which additinal bytes
or attribute bits have been defined. Software can safely use defaults. However,
the upper nibble should always be checked.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
York Sun
2010-05-07 09:12:01 -05:00
committed by Kumar Gala
parent f54fe87ace
commit bcb6c2bb84
2 changed files with 7 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c
View File

@ -175,8 +175,8 @@ determine_refresh_rate_ps(const unsigned int spd_refresh)
* ordinal 2, ddr2_speed_bins[1] contains tCK for CL=3
* Not certain if any good value exists for CL=2
*/
/* CL2 CL3 CL4 CL5 CL6 */
unsigned short ddr2_speed_bins[] = { 0, 5000, 3750, 3000, 2500 };
/* CL2 CL3 CL4 CL5 CL6 CL7*/
unsigned short ddr2_speed_bins[] = { 0, 5000, 3750, 3000, 2500, 1875 };
unsigned int
compute_derated_DDR2_CAS_latency(unsigned int mclk_ps)