Files
u-boot-sunxi/board
Martyn Welch 6d6564957c board: ge: bx50v3: Enable hardware watchdog
Enable the hardware watchdog on bx50v3 to cause it to reset in the event
the board hangs.

Configure GPIO_9 pin as WDOG1_B so that a watchdog timeout results in a
full system reset.

The watchdog is used and reconfigured by systemd approximately 1.7 seconds
into boot. Adding a few seconds for U-Boot and a few more seconds as a
safety margin.

Note that the PCIe controller is _not_ put back into a safe state prior
to board reset.  This is a problem if board reset is implemented as CPU
reset.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04 12:00:58 +01:00
..
2017-08-16 08:22:18 -04:00
2017-08-16 08:22:18 -04:00
2018-01-28 12:27:32 -05:00
2017-10-16 09:42:51 -04:00
2017-11-29 22:36:59 -05:00
2017-10-16 09:42:51 -04:00
2017-08-16 08:22:18 -04:00
2017-08-16 08:30:24 -04:00