mirror of
https://github.com/linux-sunxi/u-boot-sunxi.git
synced 2024-02-12 11:16:03 +08:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
113 lines
2.3 KiB
ArmAsm
113 lines
2.3 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* armboot - Startup Code for ARM920 CPU-core
|
|
*
|
|
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
|
|
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
|
|
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
|
|
*/
|
|
|
|
#include <asm-offsets.h>
|
|
#include <common.h>
|
|
#include <config.h>
|
|
|
|
/*
|
|
*************************************************************************
|
|
*
|
|
* Startup Code (called from the ARM reset exception vector)
|
|
*
|
|
* do important init only if we don't start from memory!
|
|
* relocate armboot to ram
|
|
* setup stack
|
|
* jump to second stage
|
|
*
|
|
*************************************************************************
|
|
*/
|
|
|
|
.globl reset
|
|
|
|
reset:
|
|
/*
|
|
* set the cpu to SVC32 mode
|
|
*/
|
|
mrs r0, cpsr
|
|
bic r0, r0, #0x1f
|
|
orr r0, r0, #0xd3
|
|
msr cpsr, r0
|
|
|
|
#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK)
|
|
/*
|
|
* relocate exception table
|
|
*/
|
|
ldr r0, =_start
|
|
ldr r1, =0x0
|
|
mov r2, #16
|
|
copyex:
|
|
subs r2, r2, #1
|
|
ldr r3, [r0], #4
|
|
str r3, [r1], #4
|
|
bne copyex
|
|
#endif
|
|
|
|
/*
|
|
* we do sys-critical inits only at reboot,
|
|
* not when booting from ram!
|
|
*/
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
bl cpu_init_crit
|
|
#endif
|
|
|
|
bl _main
|
|
|
|
/*------------------------------------------------------------------------------*/
|
|
|
|
.globl c_runtime_cpu_setup
|
|
c_runtime_cpu_setup:
|
|
|
|
mov pc, lr
|
|
|
|
/*
|
|
*************************************************************************
|
|
*
|
|
* CPU_init_critical registers
|
|
*
|
|
* setup important registers
|
|
* setup memory timing
|
|
*
|
|
*************************************************************************
|
|
*/
|
|
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
cpu_init_crit:
|
|
/*
|
|
* flush v4 I/D caches
|
|
*/
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
|
|
mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
|
|
|
|
/*
|
|
* disable MMU stuff and caches
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
|
|
bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
|
|
orr r0, r0, #0x00000002 @ set bit 1 (A) Align
|
|
orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
|
|
/*
|
|
* before relocating, we have to setup RAM timing
|
|
* because memory timing is board-dependend, you will
|
|
* find a lowlevel_init.S in your board directory.
|
|
*/
|
|
mov ip, lr
|
|
|
|
bl lowlevel_init
|
|
mov lr, ip
|
|
#endif
|
|
mov pc, lr
|
|
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
|