CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there

We provide a default table of { 9600, 19200, 38400, 57600, 115200 } in <config_fallbacks.h> which mkconfig places after <configs/...h> in the generated config file. This is used when a board has not set its own table. Signed-off-by: Tom Rini <trini@ti.com>
2026-01-08 17:32:59 +08:00 · 2012-06-19 12:54:34 +00:00
parent 87d65558ef
commit 26750c8aee
242 changed files with 17 additions and 405 deletions
--- a/arch/blackfin/include/asm/config.h
+++ b/arch/blackfin/include/asm/config.h
@@ -162,9 +162,6 @@
 # undef CONFIG_SYS_HZ
 #endif
 #define CONFIG_SYS_HZ 1000
-#ifndef CONFIG_SYS_BAUDRATE_TABLE
-# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#endif

 /* Blackfin POST tests */
 #ifdef CONFIG_POST_BSPEC1_GPIO_LEDS
--- a/board/fads/fads.h
+++ b/board/fads/fads.h
@@ -147,8 +147,6 @@

 #define	CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2012 Texas Instruments
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License Version 2. This file is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __CONFIG_FALLBACKS_H
+#define __CONFIG_FALLBACKS_H
+
+#ifndef CONFIG_SYS_BAUDRATE_TABLE
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#endif
+
+#endif	/* __CONFIG_FALLBACKS_H */
--- a/include/configs/A3000.h
+++ b/include/configs/A3000.h
@@ -49,7 +49,6 @@

 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #define CONFIG_BOOTDELAY	5

--- a/include/configs/AMX860.h
+++ b/include/configs/AMX860.h
@@ -121,8 +121,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/Adder.h
+++ b/include/configs/Adder.h
@@ -101,8 +101,6 @@

 #define CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*-----------------------------------------------------------------------
 * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero)
 */
--- a/include/configs/BMW.h
+++ b/include/configs/BMW.h
@@ -51,7 +51,6 @@

 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz	*/

--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -49,7 +49,6 @@

 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"

--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -203,8 +203,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #define	CONFIG_SYS_RESET_ADDRESS 0xFFF00100	/* "bad" address		*/

 /*
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -216,8 +216,6 @@

 #define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100	/* "bad" address		*/

 #define CONFIG_LOOPW
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -49,7 +49,6 @@

 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"

--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -40,7 +40,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE 9600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }

 #undef	CONFIG_MONITOR_IS_IN_RAM		/* starts uboot direct */

--- a/include/configs/ELPT860.h
+++ b/include/configs/ELPT860.h
@@ -145,7 +145,6 @@
 #define CONFIG_ENV_IS_IN_FLASH	1      /* Environment is in FLASH	*/

 #define CONFIG_BAUDRATE		9600   /* console baudrate = 9600 bps	*/
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #define CONFIG_ETHADDR		00:01:77:00:60:40
 #define CONFIG_IPADDR		192.168.0.30
--- a/include/configs/EP88x.h
+++ b/include/configs/EP88x.h
@@ -96,8 +96,6 @@

 #define CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*-----------------------------------------------------------------------
 * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero)
 */
--- a/include/configs/ESTEEM192E.h
+++ b/include/configs/ESTEEM192E.h
@@ -102,10 +102,6 @@

 #define	CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks	*/

-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/ETX094.h
+++ b/include/configs/ETX094.h
@@ -122,8 +122,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/FADS823.h
+++ b/include/configs/FADS823.h
@@ -154,8 +154,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/FADS850SAR.h
+++ b/include/configs/FADS850SAR.h
@@ -100,8 +100,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/FLAGADM.h
+++ b/include/configs/FLAGADM.h
@@ -112,8 +112,6 @@

 #define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/FPS850L.h
+++ b/include/configs/FPS850L.h
@@ -151,8 +151,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/FPS860L.h
+++ b/include/configs/FPS860L.h
@@ -151,8 +151,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -63,16 +63,6 @@
 #define	CONFIG_8xx_CONS_SMC1
 #define CONFIG_BAUDRATE			38400

-/*
- * Set allowable console baud rates
- */
-#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600,		\
-					  19200,	\
-					  38400,	\
-					  57600,	\
-					  115200,	\
-					}
-
 /*
 * Print console information
 */
--- a/include/configs/HIDDEN_DRAGON.h
+++ b/include/configs/HIDDEN_DRAGON.h
@@ -190,7 +190,6 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_SYS_FLASH_BANKS		{ FLASH_BASE0_PRELIM }

 /*-----------------------------------------------------------------------
--- a/include/configs/IAD210.h
+++ b/include/configs/IAD210.h
@@ -166,8 +166,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/ICU862.h
+++ b/include/configs/ICU862.h
@@ -170,8 +170,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -215,8 +215,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #define	CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/

 /*
--- a/include/configs/IP860.h
+++ b/include/configs/IP860.h
@@ -135,8 +135,6 @@

 #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/IPHASE4539.h
+++ b/include/configs/IPHASE4539.h
@@ -175,8 +175,6 @@

 #define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #define CONFIG_SYS_RESET_ADDRESS	0x04400000

 #define CONFIG_MISC_INIT_R	1	/* We need misc_init_r()	*/
--- a/include/configs/ISPAN.h
+++ b/include/configs/ISPAN.h
@@ -160,8 +160,6 @@

 #define CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #define CONFIG_SYS_RESET_ADDRESS	0x09900000

 #define CONFIG_MISC_INIT_R			/* We need misc_init_r()	*/
--- a/include/configs/IVML24.h
+++ b/include/configs/IVML24.h
@@ -129,8 +129,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/IVMS8.h
+++ b/include/configs/IVMS8.h
@@ -126,8 +126,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/LANTEC.h
+++ b/include/configs/LANTEC.h
@@ -139,8 +139,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -36,7 +36,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT		5000
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -41,7 +41,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef CONFIG_WATCHDOG

--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -40,7 +40,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
--- a/include/configs/M5249EVB.h
+++ b/include/configs/M5249EVB.h
@@ -42,7 +42,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef  CONFIG_WATCHDOG

--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -33,7 +33,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef CONFIG_WATCHDOG		/* disable watchdog */

--- a/include/configs/M5253EVBE.h
+++ b/include/configs/M5253EVBE.h
@@ -33,7 +33,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef CONFIG_WATCHDOG		/* disable watchdog */

--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -43,7 +43,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef CONFIG_WATCHDOG		/* disable watchdog */

--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -41,7 +41,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT 10000	/* timeout in milliseconds */
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -46,7 +46,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 /* Configuration for environment
 * Environment is embedded in u-boot in the second sector of the flash
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -41,7 +41,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef	CONFIG_MONITOR_IS_IN_RAM	/* define if monitor is started from a pre-loader */

--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -40,7 +40,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT		5000
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -40,7 +40,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -40,7 +40,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	3360	/* timeout in ms, max is 3.36 sec */
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -41,7 +41,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef CONFIG_WATCHDOG

--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -41,7 +41,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #undef CONFIG_WATCHDOG

--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -41,7 +41,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #define CONFIG_HW_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
--- a/include/configs/M5485EVB.h
+++ b/include/configs/M5485EVB.h
@@ -41,7 +41,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

 #define CONFIG_HW_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
--- a/include/configs/MBX.h
+++ b/include/configs/MBX.h
@@ -119,8 +119,6 @@

 #define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/MBX860T.h
+++ b/include/configs/MBX860T.h
@@ -74,8 +74,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/MHPC.h
+++ b/include/configs/MHPC.h
@@ -162,8 +162,6 @@

 #define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/MOUSSE.h
+++ b/include/configs/MOUSSE.h
@@ -140,8 +140,6 @@
 					   1MB - 64K FLASH0 SEG =960K
 					   (size=0xf0000)*/

-#define CONFIG_SYS_BAUDRATE_TABLE  { 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * NS16550 Configuration
 */
--- a/include/configs/MUSENKI.h
+++ b/include/configs/MUSENKI.h
@@ -49,7 +49,6 @@

 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #define CONFIG_BOOTDELAY	5

--- a/include/configs/MVBLUE.h
+++ b/include/configs/MVBLUE.h
@@ -66,7 +66,6 @@

 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOT_RETRY_TIME	-1
--- a/include/configs/MVS1.h
+++ b/include/configs/MVS1.h
@@ -124,8 +124,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/NETPHONE.h
+++ b/include/configs/NETPHONE.h
@@ -155,8 +155,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -168,8 +168,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/NETTA2.h
+++ b/include/configs/NETTA2.h
@@ -156,8 +156,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/NETVIA.h
+++ b/include/configs/NETVIA.h
@@ -137,8 +137,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/NSCU.h
+++ b/include/configs/NSCU.h
@@ -159,8 +159,6 @@

 #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/NX823.h
+++ b/include/configs/NX823.h
@@ -101,8 +101,6 @@

 #define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/PCIPPC2.h
+++ b/include/configs/PCIPPC2.h
@@ -50,7 +50,6 @@

 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #define CONFIG_PREBOOT		""
 #define CONFIG_BOOTDELAY	5
--- a/include/configs/PCIPPC6.h
+++ b/include/configs/PCIPPC6.h
@@ -50,7 +50,6 @@

 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #define CONFIG_PREBOOT		""
 #define CONFIG_BOOTDELAY	5
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -200,8 +200,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #define	CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/

 /*
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -200,8 +200,6 @@

 #define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/

 /*
--- a/include/configs/PMC405DE.h
+++ b/include/configs/PMC405DE.h
@@ -117,10 +117,6 @@
 #undef  CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_SYS_BASE_BAUD		691200

-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{ 9600, 19200, 38400, 57600, 115200 }
-
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1	/* To use extended board_into (bd_t) */

--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -171,7 +171,6 @@
 /*
 * Serial port configuration
 */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
--- a/include/configs/QS823.h
+++ b/include/configs/QS823.h
@@ -255,8 +255,6 @@

 #define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*-----------------------------------------------------------------------
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/QS850.h
+++ b/include/configs/QS850.h
@@ -255,8 +255,6 @@

 #define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*-----------------------------------------------------------------------
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/QS860T.h
+++ b/include/configs/QS860T.h
@@ -165,8 +165,6 @@ CONFIG_SPI

 #define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*-----------------------------------------------------------------------
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/R360MPI.h
+++ b/include/configs/R360MPI.h
@@ -162,8 +162,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * JFFS2 partitions
 */
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -151,8 +151,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -134,8 +134,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/RPXlite.h
+++ b/include/configs/RPXlite.h
@@ -103,8 +103,6 @@

 #define	CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/RPXlite_DW.h
+++ b/include/configs/RPXlite_DW.h
@@ -178,7 +178,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */

 #define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 /*
 * Low Level Configuration Settings
--- a/include/configs/RPXsuper.h
+++ b/include/configs/RPXsuper.h
@@ -216,9 +216,6 @@
 #define CONFIG_SYS_LOAD_ADDR     0x100000     /* default load address */
 #define CONFIG_SYS_HZ            1000         /* decrementer freq: 1 ms ticks */

-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/RRvision.h
+++ b/include/configs/RRvision.h
@@ -180,8 +180,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/SCM.h
+++ b/include/configs/SCM.h
@@ -234,8 +234,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #define	CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC	/* "bad" address		*/

 #define CONFIG_MISC_INIT_R		/* have misc_init_r() function	*/
--- a/include/configs/SM850.h
+++ b/include/configs/SM850.h
@@ -109,8 +109,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -121,8 +121,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/SX1.h
+++ b/include/configs/SX1.h
@@ -90,8 +90,6 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-

 /*
 * BOOTP options
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -188,8 +188,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -226,7 +226,6 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec		*/


-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_SYS_FLASH_BANKS		{ FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }

 /*-----------------------------------------------------------------------
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -194,7 +194,6 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_SYS_FLASH_BANKS		{ FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }

 /*-----------------------------------------------------------------------
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -48,7 +48,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		19200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }

 #undef  CONFIG_WATCHDOG

--- a/include/configs/TK885D.h
+++ b/include/configs/TK885D.h
@@ -200,8 +200,6 @@

 #define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Enable loopw command.
 */
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -166,8 +166,6 @@

 #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -161,8 +161,6 @@

 #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -268,8 +268,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #define	CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC	/* "bad" address		*/

 /*
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -332,8 +332,6 @@

 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #define	CONFIG_SYS_RESET_ADDRESS 0x40000104	/* "bad" address		*/

 /*
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -151,8 +151,6 @@

 #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -152,8 +152,6 @@

 #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -155,8 +155,6 @@

 #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -189,8 +189,6 @@

 #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -154,8 +154,6 @@

 #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -155,8 +155,6 @@

 #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -158,8 +158,6 @@

 #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -158,8 +158,6 @@

 #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -201,8 +201,6 @@

 #define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */

-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
--- a/Show More
+++ b/Show More