MDEV/immortalwrt
1
0
Fork 0
forked from immortalwrt/immortalwrt
Code Pull Requests Activity

master #1

Merged
kevin125 merged 18 commits from immortalwrt/immortalwrt:master into master 2025-05-12 21:26:56 +08:00
Conversation 0 Commits 18 Files Changed 23 +2322 -78
kevin125 commented 2025-05-12 21:26:40 +08:00
Owner
Copy Link
No description provided.
kevin125 added 18 commits 2025-05-12 21:26:41 +08:00
ramips: drop ALT0 name from Pulse EX400 dts model ff55daf1eb 
The alternative model name does not need to be represented in the DTS.

Signed-off-by: David Bauer <mail@david-bauer.net>
ramips: add Semtech SX9512 touch input driver 0842e79338 
This driver is required for the touch-inputs as well as some LEDs on the
Genexis Pulse EX400.

The driver was also sent upstream. As the EX400 is currently the only
consumer, the driver is added target-specific for ramips.

Once the driver has been accepted upstream and is provided in a kernel
release used by OpenWrt, the package should be moved to the global input
drivers.

Link: https://www.spinics.net/lists/kernel/msg5669349.html

Signed-off-by: David Bauer <mail@david-bauer.net>
ramips: support Genexis EX400 touch controller 49a1781d74 
Add the necessary package dependencies as well as device-tree properties
to support the touch-inputs as well as missing LEDs on the Genexis Pulse
EX400 range extender.

Signed-off-by: David Bauer <mail@david-bauer.net>
ramips: use i2c-gpio driver for EX400 f828be4d10 
Configure the i2c pins as GPIO outputs and use the i2c-gpio driver to
control the Semtech SX9512 touch controller.

This fixes spurious errors in i2c transactions even at 1kHz with the
native i2c driver.

leds green:wan: Setting an LED's brightness failed (-6)

Signed-off-by: David Bauer <mail@david-bauer.net>
ramips: add support for Cudy R700 75403dd1d0 
This is the same hardware as the Cudy WR2100 that's
had support for some time now, just without the WLAN
hardware.

This PR is mostly copied from the commit that added
support for the WR2100, here: 3501db9

Specifications:
SoC: MT7621
CPU: 880 MHz
Flash: 16 MiB
RAM: 128 MiB
Ethernet: 5x Gbit ports

Installation:
There are two known options:

The Luci-based UI.
Press and hold the reset button during power up.
The router will request 'recovery.bin' from a TFTP server at
192.168.1.88.

Both options require a signed firmware binary.
A signed firmware can be found in GitHub PR #18532.

R4 & R5 need to be shorted (0-100Ω) for the UART to work.

Link: https://github.com/openwrt/openwrt/pull/18532

Signed-off-by: David DeGraw <degraw@fastmail.com>
lantiq: xrx200_legacy: rename PHY LEDs e4b8279b7e 
This commit corrects led phy names. This has been discussed
at link [1] and corrected in the mediatek target in the
commit a51fd20e0d. Now it's time
to do the same thing in the lantiq target.

Link: https://github.com/openwrt/openwrt/pull/18265
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
lantiq: xrx200_legacy: rename TP-LINK to TP-Link a3da25c62b 
Keep the name consistent with other places.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
nat46: bump to latest git HEAD 2025-04-23 7398204683 
This new version introduces many compilation error fixes for
the upcoming 6.12 kernel. Changelogs:

04923c5 "Fix build failures observed so far" - take three.
b4263cc "Fix build failures observed so far" - take two.
de595b4 Fix build failures observed so far
1c0066a Zero checksum handling for UDP4->UDP6
b42c37d Fix crash when viewing nat46 kernel module config
3a9f630 nat46-module: fix modpost warning
88b91ca gha: use checkout@v4 action instead of checkout@v2
84ba13a gha: enable github action on push/PR
f367088 fix the compilation error
03c14bf gha: clean-up the yaml definition
d964921 Create c-compile.yml
cb69317  "Add network namespace awareness to nat46" - take two.
8302f42 Revert "Add network namespace awareness to nat46"
91b8e68 Add network namespace awareness to nat46

Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
hostapd: Enable DPPv2 support for OpenSSL and mbedtls ba6aacd2b8 
Enable Device Provisioning Protocol (DPPv2) in hostapd
for the "full" build-variants.

DPPv2 currently does not compile with WolfSSL due to
missing PKCS7 and certificate support.

Link: https://github.com/openwrt/openwrt/pull/18485

Signed-off-by: Gustavo Bertoli <gubertoli@gmail.com>
iw: backport WiFi 7 (EHT) scan support 3d9236d451 
Backport patches to support scans of WiFi 7 APs.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/18741
Signed-off-by: Robert Marko <robimarko@gmail.com>
kernel: add missing Kconfig symbols 4044ce7109 
Found when building rockchip target (with kernel 6.12).

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/18685
Signed-off-by: Robert Marko <robimarko@gmail.com>
ucode: update to Git HEAD (2025-05-11) 2a9316fbfb 
567207a9bf16 fs: implement fileno() on directory handles
eb1d93235509 fs: support passing directory handle or fd in chdir()
38a2254337f1 build: detect whether toolchain employs default source fortification
6eddfc9dff17 resolv: fix fd leak in send_queries
3d36856b2dc5 uci: fix memory leak on cursor() error
aafde95f1ecf uci: add cursor() flags argument
d8cebc5a6bfd Revert "WIP: lib: support map() over objects"
2599cf80736b zlib: incorporate latest PR changes
830f316a7e49 socker: let sock.peercred() clear error on success
4cbac141406e types: rename u64_to_constant flag to ext_flag
d802fe5da5cd types: add support for resources with embedded data/values
71b4fdc6f60b types: add support for setting resource persistent flag
141f799eba08 uloop: use container_of instead of direct pointer casts
1396f8f2988d uloop: use uc_fn_thisval
9a121fc7440c uloop: drop object_registry
11b804d97086 socket: do not clear last_error in socket.error()
d5b3a9dc1091 socket: add strerror() method

Fixes: https://github.com/jow-/ucode/issues/285
Signed-off-by: Felix Fietkau <nbd@nbd.name>
toolchain: gcc: fix build error with glibc for aarch64 targets 44ef343500 
GCC 14+ fails to build due to libatomic specific -march handling.
This build error triggers only with glibc and not with musl libc
which is default.

Related: https://github.com/openwrt/openwrt/issues/16073

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18647
Signed-off-by: Robert Marko <robimarko@gmail.com>
unetmsg: reconnect on loss of tx connection 929702fdc5 
Avoids half-connected broken state

Signed-off-by: Felix Fietkau <nbd@nbd.name>
unetmsg: ping on tx channel after new incoming connection 9bdbe24176 
Ensure that stale connections are timed out faster

Signed-off-by: Felix Fietkau <nbd@nbd.name>
unetmsg: clean up remote data when replacing the incoming connection 6e60ce007b 
Ensure that pub/sub state is in sync

Signed-off-by: Felix Fietkau <nbd@nbd.name>
ucode: ubus: fix use-after-free on deferred request reply() method 87bfde67f2 
Hold a reference to the defer resource as long as it is still needed

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Merge Official Source c2b634f5e9 
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
kevin125 merged commit d222b7ad7a into master 2025-05-12 21:26:56 +08:00
Sign in to join this conversation.
Reviewers
No Reviewers
Labels
No items
No Label
Milestone
No items
No Milestone
Assignees
Clear assignees
kevin125
No Assignees
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: MDEV/immortalwrt#1
No description provided.
Delete Branch "immortalwrt/immortalwrt:master"

Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?