mirror of
https://github.com/immortalwrt/immortalwrt.git
synced 2025-10-30 07:49:55 +08:00
ramips: mt7621: add support for D-Link DIR-X1860 B1 / DIR-X1550 A1
Both devices seem to be completely identical and D-Link doesnt even mention the DIR-X1550 A1 in the GPL source. Furthermore the supported devices header also just contains DIR-X1860 B1. The cherry on top is the FCC filing, which features the manual for DIR-X1550 A1 but the label info for DIR-X1860 B1. I guess someone at D-Link was just as confused as me. Hardware -------- SOC: MediaTek MT7621AT FLASH: 128MB (Spansion S34ML01G200TF100) RAM: 256MB (Winbond W632GU6NB-12) WIFI: MediaTek MT7915DAN + MT7975DN DBDC 2x2 802.11ax ETH: 1x WAN, 3x LAN LED: 6 (4 GPIO controllable, 2 WIFI hardwired) BTN: WPS, Reset UART: 115200 8N1 (Pinout silkscreened) - ignore VCC MAC addresses ------------- LAN Label MAC (stored in config2 partition as ASCII (entry factory_mac=xx:xx:xx:xx:xx:xx)) WAN LAN + 3 2.4G LAN + 1 5G LAN + 2 Installation ------------ Vendor UI --------- 1. Browse to http://192.168.0.1 and login. 2. Navigate to "Management" -> "Upgrade". 3. Press the "Select File" button and upload openwrt-ramips-mt7621-dlink_dir-x1860-b1-squashfs-factory.bin 4. Confirm the security questions, wait for a reboot and enjoy OpenWrt. Recovery UI ----------- 1. Set your IP address to 192.168.0.101, subnet 255.255.255.0. 2. Power on the device while holding reset. 3. Release reset once the status led starts to blink orange. 4. Open a chrome- or firefox based browser and browse to https://192.168.0.1 5. Upload openwrt-ramips-mt7621-dlink_dir-x1860-b1-squashfs-recovery.bin wait for a reboot and enjoy OpenWrt. Back to stock ------------- 1. Set your IP address to 192.168.0.101, subnet 255.255.255.0. 2. Power on the device while holding reset. 3. Release reset once the status led starts to blink orange. 4. Open a chrome- or firefox based browser and browse to https://192.168.0.1 5. Upload a decrypted vendor image, wait for a reboot and regret your decision. Decrypt vendor image -------------------- 1. Download dlink-sge-image.c and dlink-sge-image.h from the firmware-utils openwrt repository. 2. Compile a binary from the downloaded file e.g. gcc dlink-sge-image.c -lcrypto -o dlink-sge-image 3. Run ./dlink-sge-image DIR-X1860-B1 <vendor_image> <decrypted_image> -d Signed-off-by: Christoph Krapp <achterin@gmail.com> Link: https://github.com/openwrt/openwrt/pull/20410 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Christoph Krapp
committed by
Hauke Mehrtens
Hauke Mehrtens
parent
29cc0b6ccf
commit
13dc286814
251
target/linux/ramips/dts/mt7621_dlink_dir-x1860-b1.dts
Normal file
251
target/linux/ramips/dts/mt7621_dlink_dir-x1860-b1.dts
Normal file
@ -0,0 +1,251 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "dlink,dir-x1860-b1", "mediatek,mt7621-soc";
|
||||
model = "D-Link DIR-X1860 B1 / DIR-X1550 A1";
|
||||
|
||||
aliases {
|
||||
label-mac-device = ðernet;
|
||||
led-boot = &status_orange;
|
||||
led-failsafe = &status_orange;
|
||||
led-running = &status_white;
|
||||
led-upgrade = &status_orange;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
status_white: power {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
status_orange: status_orange {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_ORANGE>;
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
wan_white {
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "mt7530-0:04:link";
|
||||
};
|
||||
|
||||
wan_orange {
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_ORANGE>;
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
virtual_flash {
|
||||
compatible = "mtd-concat";
|
||||
|
||||
devices = <&fwconcat0 &fwconcat1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "ubi";
|
||||
reg = <0x0 0x0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "bootloader";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "config";
|
||||
reg = <0x80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "factory";
|
||||
reg = <0x100000 0x80000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0xe00>;
|
||||
};
|
||||
|
||||
precal_factory_e10: precal@e10 {
|
||||
reg = <0xe10 0x19c10>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "config2";
|
||||
reg = <0x180000 0x40000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_config2_10: macaddr@10 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x10 0x11>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@1c0000 {
|
||||
label = "kernel";
|
||||
reg = <0x1c0000 0x800000>;
|
||||
};
|
||||
|
||||
fwconcat0: partition@9c0000 {
|
||||
label = "fwconcat0";
|
||||
reg = <0x9c0000 0x2000000>;
|
||||
};
|
||||
|
||||
partition@29c0000 {
|
||||
label = "kernel2";
|
||||
reg = <0x29c0000 0x800000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
fwconcat1: partition@31c0000 {
|
||||
label = "fwconcat1";
|
||||
reg = <0x31c0000 0x2a00000>;
|
||||
};
|
||||
|
||||
partition@5bc0000 {
|
||||
label = "private";
|
||||
reg = <0x5bc0000 0x1400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6fc0000 {
|
||||
label = "mydlink";
|
||||
reg = <0x6fc0000 0x600000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@75c0000 {
|
||||
label = "myconfig";
|
||||
reg = <0x75c0000 0xa00000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
nvmem-cells = <&eeprom_factory_0>, <&precal_factory_e10>;
|
||||
nvmem-cell-names = "eeprom", "precal";
|
||||
mediatek,disable-radar-background;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
band@0 {
|
||||
reg = <0>;
|
||||
nvmem-cells = <&macaddr_config2_10 1>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
band@1 {
|
||||
reg = <1>;
|
||||
nvmem-cells = <&macaddr_config2_10 2>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_config2_10 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
phy-handle = <ðphy4>;
|
||||
nvmem-cells = <&macaddr_config2_10 3>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
ðphy4 {
|
||||
/delete-property/ interrupts;
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -1093,6 +1093,30 @@ define Device/dlink_dir-882-r1
|
||||
endef
|
||||
TARGET_DEVICES += dlink_dir-882-r1
|
||||
|
||||
define Device/dlink_dir-x1860-b1
|
||||
$(Device/nand)
|
||||
KERNEL_SIZE := 8192k
|
||||
IMAGE_SIZE := 40960k
|
||||
DEVICE_VENDOR := D-Link
|
||||
DEVICE_MODEL := DIR-X1860
|
||||
DEVICE_VARIANT := B1
|
||||
DEVICE_ALT0_VENDOR := D-Link
|
||||
DEVICE_ALT0_MODEL := DIR-X1550
|
||||
DEVICE_ALT0_VARIANT := A1
|
||||
DEVICE_PACKAGES := kmod-mt7915-firmware
|
||||
KERNEL_LOADADDR := 0x82000000
|
||||
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
|
||||
append-squashfs4-fakeroot
|
||||
IMAGES += factory.bin recovery.bin
|
||||
IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
|
||||
append-ubi | check-size
|
||||
IMAGE/factory.bin := $$(IMAGE/recovery.bin) | \
|
||||
append-dlink-covr-metadata $$(DEVICE_MODEL) | \
|
||||
dlink-sge-image $$(DEVICE_MODEL)-$$(DEVICE_VARIANT)
|
||||
endef
|
||||
TARGET_DEVICES += dlink_dir-x1860-b1
|
||||
|
||||
define Device/dlink_dra-1360-a1
|
||||
$(Device/dlink_dxx-1xx0-x1)
|
||||
DEVICE_MODEL := DRA-1360
|
||||
|
||||
@ -13,6 +13,7 @@ ramips_setup_interfaces()
|
||||
buffalo,wsr-2533dhpl2|\
|
||||
buffalo,wsr-2533dhpls|\
|
||||
confiabits,mt7621-v1|\
|
||||
dlink,dir-x1860-b1|\
|
||||
gehua,ghl-r-001|\
|
||||
h3c,tx1800-plus|\
|
||||
h3c,tx1801-plus|\
|
||||
|
||||
@ -84,7 +84,7 @@ platform_do_upgrade() {
|
||||
dlink,covr-x1860-a1|\
|
||||
dlink,dap-x1860-a1|\
|
||||
dlink,dir-1960-a1|\
|
||||
dlink,dir-2055-a1|\
|
||||
dlink,dir-2055-a1|\
|
||||
dlink,dir-2150-a1|\
|
||||
dlink,dir-2150-r1|\
|
||||
dlink,dir-2640-a1|\
|
||||
@ -92,6 +92,7 @@ platform_do_upgrade() {
|
||||
dlink,dir-3040-a1|\
|
||||
dlink,dir-3060-a1|\
|
||||
dlink,dir-853-a3|\
|
||||
dlink,dir-x1860-b1|\
|
||||
elecom,wmc-x1800gst|\
|
||||
elecom,wsc-x1800gs|\
|
||||
etisalat,s3|\
|
||||
|
||||
Reference in New Issue
Block a user