mirror of
https://github.com/immortalwrt/immortalwrt.git
synced 2025-10-30 07:49:55 +08:00
rockchip: Add NineTripod X3568 v4 support
Specification: - SoC: RockChip RK3568 ARM64 (4 cores) - eMMC: 16-128 GB - RAM: 2-8 GB - Power: DC 12V 2A - Ethernet: 2x YT8521SC RGMII (10/100/1000 Mbps) - Wireless radio: 802.11b/g/n/ac/ax dual-band - LED: Power: AlwaysOn User: GPIO - Button: VOL+: SARADC/0 <35k µV> VOL-: SARADC/0 <450k µV> Power/Reset: PMIC RK809 - CAN CAN/1: 4-pin (PH 2.0) - PWM PWM/4: Backlight DSI/0 DSI/1 PWM/7: IR Receiver [may not install] - UART: UART/2: Debug TTL - 1500000 8N1 (1.25mm) UART/3: TTL (PH 2.0) UART/4: TTL (PH 2.0) UART/8: AP6275S Bluetooth UART/9: TTL (PH 2.0) - I2C: I2C/0: PMIC RK809 I2C/1: Touchscreen DSI/0 DSI/1 I2C/4: Camera I2C/5: RTC@51 PCF8563 - I2S: I2S/0: miniHDMI Sound I2S/1: RK809 Audio Codec I2S/3: AP6275S Bluetooth Sound - SDMMC: SDMMC/0: microSD (TF) slot SDMMC/2: AP6275S SDIO WiFi card - Camera: 1x CSI - Video: miniHDMI / DSI0 (MIPI/LVDS) / DSI1 (MIPI/EDP) - Audio: miniHDMI / MIC on-board / Speaker / SPDIF / 3.5mm Headphones / AP6275S Bluetooth - USB: USB 2.0 HOST x2 USB 2.0 HOST x3 (4-pin) USB 2.0 OTG x1 (shared with USB 3.0 OTG/HOST) [slot may not install] USB 3.0 HOST x1 USB 3.0 OTG/HOST x1 - SATA: 1x SATA 3.0 with Power/4-pin [slot may not install] - PCIe: 1x PCIe 3.0 x2 (x4 connecter) [clock/slot may not install] More details: https://blog.gov.cooking/archives/research-ninetripod-x3568-v4-and-flash.html Signed-off-by: Coia Prant <coiaprant@gmail.com> Tested-by: Coia Prant <coiaprant@gmail.com>
This commit is contained in:
Coia Prant
committed by
Tianling Shen
Tianling Shen
parent
d371adf511
commit
4d97f439ed
@ -278,6 +278,13 @@ define U-Boot/nanopi-r5s-rk3568
|
||||
friendlyarm_nanopi-r5s
|
||||
endef
|
||||
|
||||
define U-Boot/x3568-v4-rk3568
|
||||
$(U-Boot/rk3568/Default)
|
||||
NAME:=NineTripod X3568 v4
|
||||
BUILD_DEVICES:= \
|
||||
ninetripod_x3568-v4
|
||||
endef
|
||||
|
||||
define U-Boot/photonicat-rk3568
|
||||
$(U-Boot/rk3568/Default)
|
||||
NAME:=Photonicat
|
||||
@ -481,6 +488,7 @@ UBOOT_TARGETS := \
|
||||
mrkaio-m68s-rk3568 \
|
||||
nanopi-r5c-rk3568 \
|
||||
nanopi-r5s-rk3568 \
|
||||
x3568-v4-rk3568 \
|
||||
photonicat-rk3568 \
|
||||
xiguapi-v3-rk3568 \
|
||||
radxa-e25-rk3568 \
|
||||
|
||||
@ -0,0 +1,3 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "rk356x-u-boot.dtsi"
|
||||
850
package/boot/uboot-rockchip/src/arch/arm/dts/rk3568-x3568-v4.dts
Normal file
850
package/boot/uboot-rockchip/src/arch/arm/dts/rk3568-x3568-v4.dts
Normal file
@ -0,0 +1,850 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
model = "NineTripod X3568 v4";
|
||||
compatible = "ninetripod,x3568-v4", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc0;
|
||||
mmc2 = &sdmmc2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-vol-up {
|
||||
label = "volume up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
press-threshold-microvolt = <50000>;
|
||||
};
|
||||
|
||||
button-vol-down {
|
||||
label = "volume down";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
press-threshold-microvolt = <500000>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_work: led-0 {
|
||||
gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_work_en>;
|
||||
};
|
||||
};
|
||||
|
||||
rk809-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "Analog RK809";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_8ch>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk809>;
|
||||
};
|
||||
};
|
||||
|
||||
pdm_codec: pdm-codec {
|
||||
compatible = "dmic-codec";
|
||||
num-channels = <2>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
pdm_sound: pdm-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "microphone";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&pdm>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&pdm_codec>;
|
||||
};
|
||||
};
|
||||
|
||||
spdif_dit: spdif-dit {
|
||||
compatible = "linux,spdif-dit";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
spdif_sound: spdif-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "SPDIF";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&spdif>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&spdif_dit>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable>;
|
||||
post-power-on-delay-ms = <100>;
|
||||
power-off-delay-us = <300>;
|
||||
reset-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
dc_12v: regulator-dc-12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
pcie30_avdd0v9: regulator-pcie30-avdd0v9 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
pcie30_avdd1v8: regulator-pcie30-avdd1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: regulator-vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: regulator-vcc3v3-pcie {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
enable-active-high;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc3v3_pcie_en_pin>;
|
||||
gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: regulator-vcc5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_host: regulator-vcc5v0-usb-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_host_en>;
|
||||
regulator-name = "vcc5v0_usb_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg: regulator-vcc5v0-usb-otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
||||
regulator-name = "vcc5v0_usb_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
};
|
||||
|
||||
/* used for usb_host0_xhci */
|
||||
&combphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for usb_host1_xhci */
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to sata2 */
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
clock_in_out = "output";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac0_miim
|
||||
&gmac0_tx_bus2
|
||||
&gmac0_rx_bus2
|
||||
&gmac0_rgmii_clk
|
||||
&gmac0_rgmii_bus
|
||||
&gmac0_clkinout>;
|
||||
phy-handle = <&rgmii_phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
clock_in_out = "output";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m1_miim
|
||||
&gmac1m1_tx_bus2
|
||||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk
|
||||
&gmac1m1_rgmii_bus
|
||||
&gmac1m1_clkinout>;
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pdm {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spdif {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vdda0v9_image>;
|
||||
avdd-1v8-supply = <&vcca1v8_image>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
||||
#clock-cells = <1>;
|
||||
clock-names = "mclk";
|
||||
clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
|
||||
system-power-controller;
|
||||
#sound-dai-cells = <0>;
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
wakeup-source;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
codec {
|
||||
rockchip,mic-in-differential;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for AP6275S Bluetooth Sound */
|
||||
&i2s3_2ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can1 {
|
||||
assigned-clocks = <&cru CLK_CAN1>;
|
||||
assigned-clock-rates = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&can1m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Required remotectl for IR receiver */
|
||||
&pwm7 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
|
||||
rx-internal-delay-ps = <1500>;
|
||||
tx-internal-delay-ps = <1500>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
|
||||
rx-internal-delay-ps = <1500>;
|
||||
tx-internal-delay-ps = <1500>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_reset_pin>;
|
||||
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
leds {
|
||||
led_work_en: led_work_en {
|
||||
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable: wifi-enable {
|
||||
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_usb_host_en: vcc5v0_usb_host_en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie_reset_pin: pcie-reset-pin {
|
||||
rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
|
||||
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for eMMC */
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for microSD (TF) Slot */
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for AP6275S WiFi */
|
||||
&sdmmc2 {
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sys>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for Debug */
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-0 = <&uart3m1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-0 = <&uart4m1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for WiFi/BT AP6275S */
|
||||
&uart8 {
|
||||
pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart9 {
|
||||
pinctrl-0 = <&uart9m1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
extcon = <&usb2phy0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
@ -0,0 +1,80 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SKIP_LOWLEVEL_INIT=y
|
||||
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
|
||||
CONFIG_COUNTER_FREQUENCY=24000000
|
||||
CONFIG_ARCH_ROCKCHIP=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="rk3568-x3568-v4"
|
||||
CONFIG_ROCKCHIP_RK3568=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_DEBUG_UART_BASE=0xFE660000
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_SYS_LOAD_ADDR=0xc00800
|
||||
CONFIG_PCI=y
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_AHCI=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_VERBOSE=y
|
||||
CONFIG_SPL_FIT_SIGNATURE=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_LEGACY_IMAGE_FORMAT=y
|
||||
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-x3568-v4.dtb"
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
||||
CONFIG_SPL_MAX_SIZE=0x40000
|
||||
CONFIG_SPL_PAD_TO=0x7f8000
|
||||
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
CONFIG_SPL_ATF=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_PCI=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_PMIC=y
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_LIVE=y
|
||||
# CONFIG_OF_UPSTREAM is not set
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
CONFIG_SPL_REGMAP=y
|
||||
CONFIG_SPL_SYSCON=y
|
||||
CONFIG_DWC_AHCI=y
|
||||
CONFIG_SPL_CLK=y
|
||||
CONFIG_ROCKCHIP_GPIO=y
|
||||
CONFIG_SYS_I2C_ROCKCHIP=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_SUPPORT_EMMC_RPMB=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_ROCKCHIP=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_SDMA=y
|
||||
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
||||
CONFIG_PHY_MOTORCOMM=y
|
||||
CONFIG_DWC_ETH_QOS=y
|
||||
CONFIG_DWC_ETH_QOS_ROCKCHIP=y
|
||||
CONFIG_NVME_PCI=y
|
||||
CONFIG_PCIE_DW_ROCKCHIP=y
|
||||
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
||||
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
CONFIG_DM_PMIC=y
|
||||
CONFIG_PMIC_RK8XX=y
|
||||
CONFIG_REGULATOR_RK8XX=y
|
||||
CONFIG_PWM_ROCKCHIP=y
|
||||
CONFIG_SPL_RAM=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BAUDRATE=1500000
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_SYS_NS16550_MEM32=y
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_GENERIC=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_OHCI_GENERIC=y
|
||||
CONFIG_USB_DWC3=y
|
||||
CONFIG_USB_DWC3_GENERIC=y
|
||||
CONFIG_ERRNO_STR=y
|
||||
@ -19,6 +19,7 @@ rockchip_setup_interfaces()
|
||||
friendlyarm,nanopi-r4se|\
|
||||
friendlyarm,nanopi-r4s-enterprise|\
|
||||
friendlyarm,nanopi-r6c|\
|
||||
ninetripod,x3568-v4|\
|
||||
radxa,e52c|\
|
||||
radxa,rockpi-e|\
|
||||
xunlong,orangepi-r1-plus|\
|
||||
|
||||
@ -38,6 +38,7 @@ friendlyarm,nanopi-r3s|\
|
||||
friendlyarm,nanopi-r5c|\
|
||||
lunzn,fastrhino-r66s|\
|
||||
mmbox,anas3035|\
|
||||
ninetripod,x3568-v4|\
|
||||
nlnet,xiguapi-v3|\
|
||||
radxa,e25|\
|
||||
sinovoip,rk3568-bpi-r2pro|\
|
||||
|
||||
@ -0,0 +1,854 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
model = "NineTripod X3568 v4";
|
||||
compatible = "ninetripod,x3568-v4", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc0;
|
||||
mmc2 = &sdmmc2;
|
||||
|
||||
led-boot = &led_work;
|
||||
led-failsafe = &led_work;
|
||||
led-running = &led_work;
|
||||
led-upgrade = &led_work;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-vol-up {
|
||||
label = "volume up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
press-threshold-microvolt = <50000>;
|
||||
};
|
||||
|
||||
button-vol-down {
|
||||
label = "volume down";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
press-threshold-microvolt = <500000>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_work: led-0 {
|
||||
gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_work_en>;
|
||||
};
|
||||
};
|
||||
|
||||
rk809-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "Analog RK809";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_8ch>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk809>;
|
||||
};
|
||||
};
|
||||
|
||||
pdm_codec: pdm-codec {
|
||||
compatible = "dmic-codec";
|
||||
num-channels = <2>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
pdm_sound: pdm-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "microphone";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&pdm>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&pdm_codec>;
|
||||
};
|
||||
};
|
||||
|
||||
spdif_dit: spdif-dit {
|
||||
compatible = "linux,spdif-dit";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
spdif_sound: spdif-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "SPDIF";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&spdif>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&spdif_dit>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable>;
|
||||
post-power-on-delay-ms = <100>;
|
||||
power-off-delay-us = <300>;
|
||||
reset-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
dc_12v: regulator-dc-12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
pcie30_avdd0v9: regulator-pcie30-avdd0v9 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
pcie30_avdd1v8: regulator-pcie30-avdd1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: regulator-vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: regulator-vcc3v3-pcie {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
enable-active-high;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc3v3_pcie_en_pin>;
|
||||
gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: regulator-vcc5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_host: regulator-vcc5v0-usb-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_host_en>;
|
||||
regulator-name = "vcc5v0_usb_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg: regulator-vcc5v0-usb-otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
||||
regulator-name = "vcc5v0_usb_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
};
|
||||
|
||||
/* used for usb_host0_xhci */
|
||||
&combphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for usb_host1_xhci */
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to sata2 */
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
clock_in_out = "output";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac0_miim
|
||||
&gmac0_tx_bus2
|
||||
&gmac0_rx_bus2
|
||||
&gmac0_rgmii_clk
|
||||
&gmac0_rgmii_bus
|
||||
&gmac0_clkinout>;
|
||||
phy-handle = <&rgmii_phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
clock_in_out = "output";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m1_miim
|
||||
&gmac1m1_tx_bus2
|
||||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk
|
||||
&gmac1m1_rgmii_bus
|
||||
&gmac1m1_clkinout>;
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pdm {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spdif {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vdda0v9_image>;
|
||||
avdd-1v8-supply = <&vcca1v8_image>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
||||
#clock-cells = <1>;
|
||||
clock-names = "mclk";
|
||||
clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
|
||||
system-power-controller;
|
||||
#sound-dai-cells = <0>;
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
wakeup-source;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
codec {
|
||||
rockchip,mic-in-differential;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for AP6275S Bluetooth Sound */
|
||||
&i2s3_2ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can1 {
|
||||
assigned-clocks = <&cru CLK_CAN1>;
|
||||
assigned-clock-rates = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&can1m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Required remotectl for IR receiver */
|
||||
&pwm7 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
|
||||
rx-internal-delay-ps = <1500>;
|
||||
tx-internal-delay-ps = <1500>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
|
||||
rx-internal-delay-ps = <1500>;
|
||||
tx-internal-delay-ps = <1500>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_reset_pin>;
|
||||
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
leds {
|
||||
led_work_en: led_work_en {
|
||||
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable: wifi-enable {
|
||||
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_usb_host_en: vcc5v0_usb_host_en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie_reset_pin: pcie-reset-pin {
|
||||
rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
|
||||
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for eMMC */
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for microSD (TF) Slot */
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
sd-uhs-sdr50;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for AP6275S WiFi */
|
||||
&sdmmc2 {
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sys>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for Debug */
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-0 = <&uart3m1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-0 = <&uart4m1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* used for WiFi/BT AP6275S */
|
||||
&uart8 {
|
||||
pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart9 {
|
||||
pinctrl-0 = <&uart9m1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
extcon = <&usb2phy0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
@ -293,6 +293,17 @@ define Device/mmbox_anas3035
|
||||
endef
|
||||
TARGET_DEVICES += mmbox_anas3035
|
||||
|
||||
define Device/ninetripod_x3568-v4
|
||||
$(Device/rk3568)
|
||||
DEVICE_VENDOR := NineTripod
|
||||
DEVICE_MODEL := X3568
|
||||
DEVICE_VARIANT := v4
|
||||
DEVICE_PACKAGES := blkdiscard block-mount kmod-ata-ahci-dwc kmod-nvme kmod-hwmon-pwmfan \
|
||||
kmod-input-adc-keys kmod-saradc-rockchip kmod-rtc-pcf8563 kmod-brcmfmac wpad-openssl \
|
||||
brcmfmac-firmware-43752-sdio brcmfmac-nvram-43752-sdio
|
||||
endef
|
||||
TARGET_DEVICES += ninetripod_x3568-v4
|
||||
|
||||
define Device/nlnet_xiguapi-v3
|
||||
$(Device/rk3568)
|
||||
DEVICE_VENDOR := NLnet
|
||||
|
||||
Reference in New Issue
Block a user