Milestone: 3.0.3.4-048 completed

changes.eng.txt

@@ -1,4 +1,4 @@
-            ASUS RT-N56U/N65U custom firmware 3.0.3.3-046 by Padavan
+            ASUS RT-N56U/N65U custom firmware 3.0.3.4-048 by Padavan
 
 
 ATTENTION:
@@ -8,6 +8,28 @@ ATTENTION:
    necessary to save your settings to a .CFG file using WebGUI BEFORE upgrading to a newer version.
    After the upgrade, restore your settings from the saved .CFG file in a usual way.
 
+Changes to firmware ver. 3.0.3.3-046:
+----------------------------------------------------------
+[RT-N65U]
+- Fixed 2.4GHz AP-Client WebUI info.
+[Common changes]
+- Rolled back to gcc-4.4.7 cross-toolchain.
+- Updated kernel-3.0.x to 3.0.71 from www.kernel.org.
+- Updated MIPS code from upstream kernels.
+- Updated dropbear SSH to v2013.56.
+- Added ipset v6.17 (utility + kernel modules).
+- Added FTP shares access control for anonymous user, improve WebUI 
+  storage page.
+- Added ability to disable SMB master browser and enable FTP syslog.
+- Added ability to change minidlna root container in WebUI.
+- Fixed IPv6 6rd logic and improve WebUI IPv6 page.
+- Fixed HW_NAT TX handler.
+- Fixed unmount bug for FAT/FAT32.
+- Fixed LAN network map in WebUI after LAN IP address reconfig.
+- Fixed daylight time for Azores, Greenwich. Disabled daylight for
+  Casablanca/Monrovia.
+
+
 Changes to firmware ver. 3.0.3.3-045:
 ----------------------------------------------------------
 - Fixed daylight time for European timezones CET and EET.
@@ -597,5 +619,5 @@ These features are NO LONGER AVAILABLE:
 
 
 -
-15/03/2013
+31/03/2013
 Padavan

readme.eng.txt

@@ -1,8 +1,8 @@
 * BUILD INSTRUCTION *
 
-1) To build the firmware, you need Linux environment. Debian squeeze 6.0.3 and 
-   Ubuntu 10.04 distros has been tested.
-2) Build cross-toolchain for MIPS32_R2 CPU (binutils-2.21.1, gcc-454, uclibc-0.9.33.2) 
+1) To build the firmware, you need Linux environment. Debian squeeze 6.0.7 and 
+   Ubuntu 10.04, 10.10, 11.04 distros has been tested.
+2) Build cross-toolchain for MIPS32_R2 CPU (binutils-2.21.1, gcc-447, uclibc-0.9.33.2) 
    from external package toolchain-rt3883.
 3) Manual configure firmware content via .config file. Use comment mark # for 
    disable features. Change param "CONFIG_TOOLCHAIN_DIR=" to target cross-toolchain 
@@ -40,5 +40,5 @@ To build cross-toolchain, you need additional packages:
 
 
 -
-09/18/2012
+03/31/2013
 Padavan

readme.rus.txt

@@ -1,9 +1,10 @@
 * ИНСТРУКЦИЯ ПО СБОРКЕ ПРОШИВКИ RT-N56U *
 
 1) Для сборки прошивки требуется Linux окружение 32 или 64 бита. Сборка прошивки
-   протестирована на Linux дистрибутивах Debian squeeze 6.0.3 и Ubuntu 10.04.
+   протестирована на Linux дистрибутивах Debian squeeze 6.0.7 и Ubuntu 10.04, 
+   10.10, 11.04.
 2) Первым делом необходимо собрать кросс-toolchain (набор для кросс-компиляции)
-   под MIPS32_R2 CPU, состоящий из пакетов binutils-2.21.1, gcc-454, uclibc-0.9.33.2.
+   под MIPS32_R2 CPU, состоящий из пакетов binutils-2.21.1, gcc-447, uclibc-0.9.33.2.
    Перейти в директорию toolchain-rt3883 и выполнить скрипт сборки. Сборка
    кросс-toolchain занимает от 10 до минут до нескольких часов, в зависимости 
    от типа CPU хоста. Если кросс-toolchain уже собран, этот пункт пропускается.
@@ -45,5 +46,5 @@ NOR флеше RT-N56U, за минусом 65536 байт - размер раз
 
 
 -
-18.09.2012
+31.03.2013
 Padavan

trunk/.config

@@ -10,8 +10,8 @@ CONFIG_FIRMWARE_PRODUCT_ID="RT-N56U"
 
 ### Firmware version (X.X.X.X-YYY)
 CONFIG_FIRMWARE_KERNEL_VER="3.0"
-CONFIG_FIRMWARE_ROOTFS_VER="3.3"
-CONFIG_FIRMWARE_BUILDS_VER="047"
+CONFIG_FIRMWARE_ROOTFS_VER="3.4"
+CONFIG_FIRMWARE_BUILDS_VER="048"
 
 ### Linux kernel and toolchain
 #CONFIG_LINUXDIR=linux-2.6.21.x