pci-scan: Fix pci-bridge-set-mem-base and pci-bridge-set-mem-limit
The functions used a bogus mixture between programming the registers
with pci-next-mem64 and pci-next-mem - the upper register bits were
filled with the value from the 64-bit memory space while the lower
bits were filled with the bits from the 32-bit memory space variable.
This separates handling of pci-{next|max}-mem64 from pci-{next|max}-mem.
This zeroes bottom 4 bits of the prefetchable memory limit and
prefetchable memory base registers for 32bit windows to enforce
that the resources are marked as 32bit.
This simplifies updating of the prefetchable memory limit in
ci-bridge-set-mem-limit.
Signed-off-by: Thomas Huth <thuth@redhat.com>
[aik: extended commit log with 32bit window changes]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
This commit is contained in:
Thomas Huth
Alexey Kardashevskiy
parent
c4dd5b62f0
commit
f8176f8279
|
|
@ -104,47 +104,56 @@ here 100 allot CONSTANT pci-device-vec
|
|||
or swap 20 + rtas-config-l! \ and write it into the Reg
|
||||
;
|
||||
|
||||
\ Update pci-next-mem to be 1MB aligned and set the mem-base and mem-base-upper register
|
||||
\ and set the Limit register to the maximum available address space
|
||||
\ needed for scanning possible devices behind the bridge
|
||||
\ Update pci-next-mem (or mem64) to be aligned and set the mem-base and
|
||||
\ mem-base-upper register. Also set the Limit register to the maximum available
|
||||
\ address space needed for scanning possible devices behind the bridge
|
||||
: pci-bridge-set-mem-base ( addr -- )
|
||||
pci-next-mem @ 100000 #aligned \ read the current Value and align to 1MB boundary
|
||||
dup pci-next-mem ! \ and write it back
|
||||
over 24 + rtas-config-w@ \ check if 64bit support
|
||||
1 and IF \ IF 64 bit support
|
||||
pci-next-mem64 @ 100000000 #aligned \ | read the current Value of 64-bit and align to 4GB boundary
|
||||
dup 100000000 + pci-next-mem64 x! \ | and write back with 1GB for bridge
|
||||
2 pick swap \ |
|
||||
20 rshift \ | keep upper 32 bits
|
||||
swap 28 + rtas-config-l! \ | and write it into the Base-Upper32-bits
|
||||
pci-max-mem64 @ 20 rshift \ | fetch max Limit address and keep upper 32 bits
|
||||
2 pick 2C + rtas-config-l! \ | and set the Limit
|
||||
THEN \ FI
|
||||
10 rshift \ keep upper 16 bits
|
||||
pci-max-mem @ 1- FFFF0000 and or \ and Insert mmem Limit (set it to max)
|
||||
swap 24 + rtas-config-l! \ and write it into the bridge
|
||||
dup 24 + rtas-config-w@ 1 and \ does bridge support 64-bit?
|
||||
pci-next-mem64 @ 0<> and IF \ and do we have 64-bit memory?
|
||||
\ Align variable to 4GB boundary
|
||||
pci-next-mem64 @ 100000000 #aligned
|
||||
dup pci-next-mem64 x!
|
||||
\ Set base and limit registers:
|
||||
20 rshift over 28 + rtas-config-l! \ set prefetch base upper 32 bits
|
||||
pci-next-mem64 @ 10 rshift FFF0 and
|
||||
pci-max-mem64 @ 1- FFF00000 and or
|
||||
over 24 + rtas-config-l! \ set prefetch limit & base lower
|
||||
pci-max-mem64 @ 1- 20 rshift
|
||||
swap 2C + rtas-config-l! \ and set the limit upper 32 bits
|
||||
ELSE
|
||||
\ Align variable to 1MB boundary
|
||||
pci-next-mem @ 100000 #aligned
|
||||
dup pci-next-mem !
|
||||
\ Set base and limit register:
|
||||
10 rshift FFF0 and
|
||||
pci-max-mem @ 1- FFF00000 and or
|
||||
swap 24 + rtas-config-l!
|
||||
THEN
|
||||
;
|
||||
|
||||
\ Update pci-next-mem to be 1MB aligned and set the mem-limit register
|
||||
\ The Limit Value is one less then the upper boundary
|
||||
\ If the limit is less than the base the mem is disabled
|
||||
\ Update pci-next-mem (or -mem64) to be aligned (with some additional space
|
||||
\ for hot-plugging later) and set the mem-limit register. The Limit Value is
|
||||
\ one less then the upper boundary.
|
||||
: pci-bridge-set-mem-limit ( addr -- )
|
||||
pci-next-mem @ 100000 + \ add space for hot-plugging
|
||||
100000 #aligned \ align to 1MB boundary
|
||||
dup pci-next-mem ! \ and write it back
|
||||
1- \ make limit one less than boundary
|
||||
over 24 + rtas-config-w@ \ check if 64bit support
|
||||
1 and IF \ IF 64 bit support
|
||||
pci-next-mem64 @ 100000000 #aligned \ | Reat current value of 64-bar and align at 4GB
|
||||
dup pci-next-mem64 x! \ | and write it back
|
||||
1- \ | make limite one less than boundary
|
||||
2 pick swap \ |
|
||||
20 rshift \ | keep upper 32 bits
|
||||
swap 2C + rtas-config-l! \ | and write it into the Limit-Upper32-bits
|
||||
THEN \ FI
|
||||
FFFF0000 and \ keep upper 16 bits
|
||||
over 24 + rtas-config-l@ 0000FFFF and \ fetch original Value
|
||||
or swap 24 + rtas-config-l! \ and write it into the bridge
|
||||
dup 24 + rtas-config-w@ 1 and \ does bridge support 64-bit?
|
||||
pci-next-mem64 @ 0<> and IF \ and do we have 64-bit memory?
|
||||
\ Update current variable (add space for hot-plugging and align it)
|
||||
pci-next-mem64 @ 80000000 +
|
||||
100000000 #aligned
|
||||
dup pci-next-mem64 x!
|
||||
\ Update the limit registers:
|
||||
1- 20 rshift
|
||||
over 2C + rtas-config-l! \ set the limit upper 32 bits
|
||||
pci-next-mem64 @ 1- 10 rshift
|
||||
swap 26 + rtas-config-w! \ set limit lower bits
|
||||
ELSE
|
||||
\ Update current variable (add space for hot-plugging and align it)
|
||||
pci-next-mem @ 100000 +
|
||||
100000 #aligned
|
||||
dup pci-next-mem !
|
||||
1- 10 rshift
|
||||
swap 26 + rtas-config-w!
|
||||
THEN
|
||||
;
|
||||
|
||||
\ Update pci-next-io to be 4KB aligned and set the io-base and io-base-upper register
|
||||
|
|
|
|||
Loading…
Reference in New Issue