The section 4.5.4 "Supervisor MSI address configuration (smsiaddrcfg
and smsiaddrcfgh)" of the AIA specification states that:
"If register mmsiaddrcfgh of the domain has bit L set to one, then
smsiaddrcfg and smsiaddrcfgh are locked as read-only alongside
mmsiaddrcfg and mmsiaddrcfgh."
In other words, the L bit is not defined for smsiaddrcfg[h] registers
so fix aplic_writel_msicfg() accordingly.
Signed-off-by: Yang Jialong <z_bajeer@yeah.net>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250806032924.3532975-1-z_bajeer@yeah.net
Signed-off-by: Anup Patel <anup@brainfault.org>
A platform can have multiple IPI devices (such as ACLINT MSWI,
AIA IMSIC, etc). Currently, OpenSBI rely on platform calling
the sbi_ipi_set_device() function in correct order and prefer
the first avaiable IPI device which is fragile.
Instead of the above, introduce IPI device rating and prefer
the highest rated IPI device. This further allows extending
the sbi_ipi_raw_clear() to clear all available IPI devices.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Nick Hu <nick.hu@sifive.com>
Link: https://lore.kernel.org/r/20250904052410.546818-2-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently the heap has a fixed housekeeping factor of 16, which means
1/16 of the heap is reserved for list nodes. But this is not enough when
there are many small allocations; in the worst case, 1/3 of the heap is
needed for list nodes (32 byte heap_node for each 64 byte allocation).
This has caused allocation failures on some platforms.
Let's avoid trying to guess the best ratio. Instead, allocate more nodes
as needed. To avoid recursion, the nodes are permanent allocations. So
to minimize fragmentation, allocate them in small batches from the end
of the last free space node. Bootstrap the free space list by embedding
one node in the heap control struct.
Some error paths are avoided because the nodes are allocated up front.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250617032306.1494528-3-samuel.holland@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
According to the Device Tree Spec, Chapter 2.3.8 "ranges" [1]:
The parent address size will be determined from the #address-cells
property of the node that defines the parent’s address space.
In fdt_translate_address(), which considered the parent address size
is the child address size, this commit fix the two address sizes
and parsing the address independently.
Signed-off-by: Max Hsu <max.hsu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250711-dev-maxh-master_fdt_helper-v2-1-9579e1f02ee1@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
This code has nothing to do with the ISA's registers, it's about the
format of ELF relocations. As such, __SIZEOF_LONG__, being a language /
ABI-level property, is a more appropriate constant to use. This also
makes it easier to support CHERI, where general-purpose registers are
extended to be capabilities, not just integers, and so the register size
is not the same as the machine word size. This also happens to make it
more correct for RV64ILP32, where the registers are 64-bit integers but
the ABI is 32-bit (both for long and for the ELF format), though
properly supporting that ABI is not part of the motivation here, just a
consequence of improving the code for CHERI.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250709232932.37622-2-jrtc27@jrtc27.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Rather than hand-rolling scaled pointer arithmetic with casts and
shifts, let the compiler do so by indexing an array of GPRs, taking
advantage of the language's type system to scale based on whatever type
the register happens to be. This makes it easier to support CHERI where
the registers are capabilities, not plain integers, and so this pointer
arithmetic would need to change (and currently REGBYTES is both the size
of a register and the size of an integer word upstream).
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250709232932.37622-1-jrtc27@jrtc27.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The plic_data struct was uninitialized. This led to misfunction behavior
since it was subsequently assigned to the global plic struct, and some
struct fields, such as flags and irqchip, contained random values.
The fix proposes to initialize the plic_data to the global plic struct,
so, after parsing the fdt, the fields of the struct will be set to the
default values set in global plic struct definition, or the parsed values
in the fdt, or zero.
Fixes: 4c37451 ("platform: openpiton: Read the device configurations from device tree")
Signed-off-by: Manuel Hernández Méndez <maherme.dev@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250708180914.1131-1-maherme.dev@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Since this persists in the preprocessed output (so that it can affect
the subsequent compilation), it ends up in the input to dtc and is a
syntax error, breaking the k210 build. Ideally we wouldn't add the
-include flag to DTSCPPFLAGS in the first place as this header is wholly
pointless there, but that's a more invasive build system change compared
to just making this header safe to include there.
Fixes: 86c01a73ff ("lib: sbi: Avoid GOT indirection for global symbol references")
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Xiang W <wxjstz@126.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Link: https://lore.kernel.org/r/20250709232840.37551-1-jrtc27@jrtc27.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The BSWAPxx() macros are now throwing the following warnings with
newer gcc versions. This is due to throwing an argument in that may
be evaluated more than one (I think) and therefore things like the
example below should be avoided.
Fix by making a set of BSWAPxx() wrappers which specifically only
evaluate 'x' once.
In file included lib/sbi/sbi_mpxy.c:21:
lib/sbi/sbi_mpxy.c: In function ‘sbi_mpxy_write_attrs’:
ib/sbi/sbi_mpxy.c:632:63: error: operation on ‘mem_idx’ may be undefined [-Werror=sequence-point]
632 | attr_val = le32_to_cpu(mem_ptr[mem_idx++]);
| ~~~~~~~^~
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Rahul Pathak <rahul@summations.net>
Reviewed-by: Xiang W <wxjstz@126.com>
Link: https://lore.kernel.org/r/20250704122938.897832-1-ben.dooks@codethink.co.uk
Signed-off-by: Anup Patel <anup@brainfault.org>
Add __stack_chk_fail() and __stack_chk_guard variable which are used by
compiler built-in stack protector.
This patch just try to support stack-protector so the value of the stack
guard variable is simply fixed for now. It could be improved by
deriving from a random number generator, such as Zkr extension or any
platform-specific random number sources.
Introduce three configurations for the stack protector:
1. CONFIG_STACK_PROTECTOR to enable the stack protector feature by
providing "-fstack-protector" compiler flag
2. CONFIG_STACK_PROTECTOR_STRONG to provide "-fstack-protector-strong"
3. CONFIG_STACK_PROTECTOR_ALL to provide "-fstack-protector-all"
Instead of fixing the compiler flag of stack-protector feature as
"-fstack-protector", we derive it from the introduced Kconfig
configurations. The compiler flag "stack-protector-cflags-y" is defined
as Makefile "immediately expanded variables" with ":=". Thus, the
stronger configuration of the stack protector can overwrite the
preceding one.
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Yu-Chien Peter Lin <peter.lin@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250703151957.2545958-3-alvinga@andestech.com
Signed-off-by: Anup Patel <anup@brainfault.org>
