* add package fluent-bit v3.1.3
* test performed
- compile-test
- run-test on target
* fluent-bit package is added to provide another option for
log collection and management. It integrates well with
a wide variety of environments and deployments. It is widely
used by a number of organizations and is supported across a
variety of platforms. Integrating it to make it available as
an openwrt package.
Signed-off-by: Rahul Thakur <rahul.thakur@iopsys.eu>
Remove upstreamed patch 300-avoid-time-printf.patch
Exim/exim@9ae8613607
Exim version 4.98
-----------------
JH/01 Support list of dkim results in the dkim_status ACL condition, making
it more usable in the data ACL.
JH/02 Bug 3040: Handle error on close of the spool data file during reception.
Previously This was only logged, on the assumption that errors would be
seen for a previous fflush(). However, a fuse filesystem has been
reported as showing this an error for the fclose(). The spool is now in
an uncertain state, and we have logged and responded acceptance. Change
this to respond with a temp-reject, wipe spoolfiles, and log the error
detail.
JH/03 Bug 3030: Fix handling of DNS servfail respons for DANE TLSA. When hit
during a recipient verify callout, a QUIT command was attempted on the
now-closed callout channel, causing a paniclog entry.
JH/04 Bug 3039: Fix handling of of an empty log_reject_target, with
a connection_reject log_selector, under tls_on_connect. Previously
with this combination, when the connect ACL rejected, a spurious
paniclog entry was made.
JH/05 Fix TLS resumption for TLS-on-connect. This was broken by the advent
of loadbalancer-detection for resumption, in 4.96 - which tries to
use the EHLO response. SMTPS does not have one at the time it is starting
TLS. Change the default for the smtp transport host_name_extract option
to be a static string, for TLS-on-connect cases; meaning that resumption
will always be attempted (unless deliberately overriden).
JH/06 Bug 3054: Fix dnsdb lookup for a TXT record with multiple chunks, with a
chunk-separator specification. This was broken by hardening introduced
for Bug 3031.
JH/07 Bug 3050: Fix -bp for old message_id format spoolfiles. Previously it
included the -H with the id; this also messed up exiqgrep.
JH/08 Bug 3056: Tighten up parsing of DKIM DNS records. Previously, whitespace
was not properly skipped and empty elements would cause mis-parsing.
Tighten parsing of DKIM header records. Previously, all but lowercase
alpha chars would be ignored in potential tag names.
JH/09 Bug 3057: Add heuristic for spotting mistyped IPv6 addresses in lists
being searched. Previously we only had one for IPv4 addresses. Per the
documentation, the error results by default in a no-match result for the
list. It is logged if the unknown_in_list log_selector is used.
JH/10 Bug 3058: Ensure that a failing expansion in a router "set" option defers
the routing operation. Previously it would silently stop routing the
message.
JH/11 Bug 3046: Fix queue-runs. Previously, the arrivel of a notification or
info-request event close in time to a scheduled run timer could result in
the latter being missed, and no further queue scheduled runs being
initiated. This ouwld be more likely on high-load systems.
JH/12 Refuse to accept a line "dot, LF" as end-of-DATA unless operating in
LF-only mode (as detected from the first header line). Previously we did
accept that in (normal) CRLF mode; this has been raised as a possible
attack scenario (under the name "smtp smuggling").
JH/13 Add an fdatasync call for the received message data file in spool, before
loggging reception and sending the SMTP ack. Previously we only flushed
the stdio buffer so there was still the possibility of a disk error.
JH/14 Bug 3061: Avoid a split log line when trying to rewrite a malformed
address. Previously, for the last address in a header line (commonly
there is only one) the terminating newline was part of the logged
information.
JH/15 Bug 3061: Ensure a log line is written for a malformed address in a
header, when parsing for address-qualification. Previously one was only
written if there were rewrite rules.
JH/16 Two-phase queue runs are now reported in the daemon startup log line and
in exiwhat output.
JH/17 Bug 3064: Fix combination of "-q<period> -R <recipients>". Introduction of
the multiple-queue-runners facility for 4.97 broke this, giving only a
one-time run of the queue.
JH/18 Bug 3068: Log a warning for use of deprecated syntax in query-style
lookups.
JH/19 Fix TLS startup. When the last expansion done before the initiation of a
TLS session resulted in a forced-fail, a misleading error was logged for
the expansino of tls_certificates. This would affect the common case of
that option being set (main-section options) but not having any variable
parts. It could also potentially affect tls_privatekeys. The underlyding
coding errors go back to 4.90 but were only exposed in 4.97.
JH/20 Bug 3047: A recent (somewhere between 10.34 and 10.42) version of the
pcre2 library starting allocating 20kB rather than 112 bytes per match
call, which broke the 2GB total limitation on Exim's memory management
when a user had over 104207 messages stored and the appendfile
maildir_quota_directory_regex option is in use. Release the allocated
memory every thosand files to avoid this.
The same issue arises with the ACL regex condition, which is applied
to every line of a received message.
JH/21 Bug 3059: Fix crash in smtp transport. When running for a message for
which all recipients had been handled (itself an issue) a null-pointer
deref was done on trying to write a retry record. Fix that by counting
the outstanding recipients before trying to transmit the message.
The situation arose for a second MX try within a transport run, when the
first had perm-rejected a recipient (the only one for the connection, in
the case seen) during pipelining, and then closed the TCP connection.
The transport classified that as an I/O error, leaving the message
outstanding but having marked up the recipient as dealt-with. It then
tried another MX because of the I/O error. Fix this by converting the
message-level status to ok if there was a close but all recipients were
dealt with. Thanks to Wolfgand Breyha for debug runs.
JH/22 The ESMTP_LIMITS facility (RFC 9422) is promoted from experimental status
and is now controlled by the build-time option DISABLE_ESMTP_LIMITS.
JH/23 Bug 3066: Avoid leaking lookup database credentials to log.
JH/24 Bug 3081: Fix a delivery process crash. When the router "errors_to"
option specified a fixed address, later rewriting on that address would
trip on the configuration data being readonly. Instead of modifying
in-place, copy data. Found and fixed by Peter Benie.
JH/25 Bug 3079: Fix crash in dbmnz. When a key was present for zero-length
data a null pointer was followed. Find and testcase by Sebastian Bugge.
JH/26 Fix encoding for an AUTH parameter on a MAIL FROM command. Previously
decimal 127 chars were not encoded, and lowercase hex was used for
encoded values. Outstanding since at least 1999.
JH/27 Fix crash in logging. When a message with a large number of recipients
had been received, and logging of recipients is enabled, the buffer used
for logging could reach limit. A read using a null pointer would then
be done, resulting in a crash of the receiving process before an SMTP
ACK for the message was returned to the sending system. Duplicate
messages were created as a result.
Find and debug help by Mateusz Krawczyk
JH/28 Bug 3086: Fix exinext for ipv6. Change the format of keys in the retry
DB, wrapping transport record bare-ip "host names" and ipv6
"host addresses" in square-brackets. This makes the parsing that
exinext does more reliable.
JH/29 Bug 3087: Fix SRS encode. A zero-length quoted element in the local-part
would cause a crash.
JH/30 Bug 3029: Avoid feeding Resent-From: to DMARC.
JH/31 Bug 3027: For -bh / -bhc tests change to using the compressed form of
ipv6 addresses for the sender. Previously the uncompressed form was used,
and if used in textual form this would result in behavior difference
versus non-bh.
JH/32 Bug 3096: MAIL before HELO/EHLO, where required by hosts_require_helo, is
now classed as a protocol error and subject to smtp_max_synprot_errors.
JH/33 Bug 2994: A subdir dsearch lookup should permit a directory name that starts
".." and has following characters.
JH/34 Fix delivery ordering for 2-phase queue run combined with
queue_run_in_order.
JH/35 Bug 3099: fix parsing of MIME filename= split over multiple paramemters.
Previously the $mime_filename variable would have an incorrect value.
While in the code, extend coverage to name= which previously was only
supported for single parameters, despite also filling in $mime_filename.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The output format of `khost` has changed. This commit fixes the regexp
for IPv4. It fixes the issue of using a custom DNS to resolve current
address.
```bash
root@localhost:~# khost ns2.afraid.org
ns2.afraid.org. has IPv4 address 69.65.50.223
ns2.afraid.org. has IPv6 address 2001:1850:1:5:800::6b
Host ns2.afraid.org. has no MX record
root@localhost:~# khost --version
khost (Knot DNS), version 3.3.5
```
Signed-off-by: Denis Shulyaka <Shulyaka@gmail.com>
ci: Fix up Docker images' tag from version number
chore(deps): bump github.com/gin-contrib/cors from 1.3.1 to 1.6.0
Signed-off-by: Milinda Brantini <C_A_T_T_E_R_Y@outlook.com>
Handle not having a dynamic pool correctly without ipcalc.sh
generating noise about it.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
- bugs
980156399e properly handle 'package_changes' entries with build breakages
119c7194b7 deal with stdout being chopped off when output is piped
75faac2167 fix ordering of '-rcN' version numbers
- issues
0aefe77e47 warn and stop on package downgrades
- enhancements
a23ea2c1ef report file download rates in verbose output
112afd07a5 report broken packages when using 'list' or 'blob'
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Changelog: version 2.1.3 (07/09/2024)
- Mostly a brown-paper bag release to fix the below regression and add a
feature I forgot to add.
- Fix regression in search() function that broke --fromfile (Florian Ernst)
(caused by removing too much code while fixing premature sort for
--fromfile)
- Allow the -L option to accept its parameter immediately (with no space)
instead of requiring it be the next option word. (Trevor Gross)
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
When searching for readline, ncurses is needed, which can be ncursesw or
ncurses. Use pkgconfig to avoid the whole situation and simplify.
Also add readline/host as the OS one may be unusable.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The 'modemmanager' uses the 'dbus'. Status information can be retrieved
with the 'mmcli' command, this can also be output in json format.
This commit adds a new 'ubus' backend with which this information can
be easily accessed via ubus.
* ubus call modemmanager info
* ubus call modemmanager dump
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
The upstream project is declared as bugfix-only and received no update
for about 2 years. The developement focus there has shifted. It does
not compile with current openwrt main branch.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Alexandru Ardelean